Availability
Showing In Stock Items. Show All 45 Items.
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$5,070.95
—
$5,119.95
Vortech has a wide variety of supercharger kits available for many electronic fuel injected cars, trucks, and SUVs. Vortech kits come complete with everything that you need to install some serious horsepower. All systems come with the required fuel management components and a fuel pump, depending on the application. Also, all required hardware comes with the kits, including hoses, OEM connectors, ducts, fasteners, and tie wraps. Of course, the kits include complete instructions with plenty of diagrams, graphics, and photos to make your installation easy.
Not Yet Reviewed
$9,254.99
—
$9,775.99
Chevrolet Performance developed the new SuperMatic 6L80-E 6-speed automatic transmissions with upgraded internal components, offering an exceptional torque rating of 650 lbs.-ft. That's a 45 percent increase over regular-production versions of this same transmission. A deep first gear enables strong launch performance, while the top gear supports balanced performance on the highway. They're for use with Chevrolet Performance LS and LSX crate engines in 2WD applications. SuperMatic 6L80-E transmissions features include: * 2,400 to 2,800 stall converter * Electro/hydraulic controls with clutch-to-clutch shifting * Output torque rating of 650 lbs.-ft. * Gear ratios: 4.02 (1st), 2.36 (2nd), 1.53 (3rd), 1.15 (4th), 0.85 (5th), 0.67 (6th) * Lightweight diecast aluminum case contributes to dry weight of approximately 195 lbs. * Uses DEXRON VI premium fluid * Truck-style production oil pan * Production vent tube assembly * Approximately 23.5 in. long * Controller and harness, with calibrations for street and track * Harness also includes paddle-shift connection, transmission bulkhead connector that supports aftermarket gear indicator displays, electronically controlled shifters, and more * Chevrolet Performance-specific design includes provisions for an aftermarket transmission cooler, including -6 AN fittings
Not Yet Reviewed
$5,182.26
—
$5,569.07
Ford Performance Parts 7.3L V8 Ford gasoline crate engine from the 2024 F250 Super Duty is loaded with great features for your build. Features: * 7.3L displacement * Bore 107.2mm x stroke 101.0mm * 430 hp at 5,500 rpm * 485 lb.-ft. of torque at 4,000 rpm * 10.5:1 compression * Cast iron block * Aluminum cylinder heads * Intake valve diameter 55.13mm * Exhaust valve diameter 42.53mm * Lift (intake/exhaust) 13.67mm/15.26mm * Cam-in-block OHV design with variable cam timing * Forged steel crankshaft * Cast aluminum pistons * Port fuel injection * Firing order: 1-5-4-8-6-3-7-2 Each engine assembly includes: * Composite intake manifold * 87mm throttle body * Left and right exhaust manifolds * 8-qt. aluminum oil pan/cooler * Ignition coils and wires * Production flexplate * Factory lift brackets * M-6038-73 shipping and storage cradle * Bellhousing bolt pattern same as 4.6/5.4 and 5.0 Coyote * Engine weight: 580 lbs.
Not Yet Reviewed
$8,749.99
Chevrolet Performance developed the new SuperMatic 6L80-E 6-speed automatic transmissions with upgraded internal components, offering an exceptional torque rating of 650 lbs.-ft. That's a 45 percent increase over regular-production versions of this same transmission. A deep first gear enables strong launch performance, while the top gear supports balanced performance on the highway. They're for use with Chevrolet Performance LS and LSX crate engines in RWD applications. SuperMatic 6L80-E transmissions feature: * 3,000 to 3,400 stall converter * Electro/hydraulic controls with clutch-to-clutch shifting * Output torque rating of 650 lbs.-ft. * Gear ratios: 4.02 (1st), 2.36 (2nd), 1.53 (3rd), 1.15 (4th), 0.85 (5th), 0.67 (6th) * Lightweight diecast aluminum case contributes to dry weight of approximately 195 lbs. * Uses DEXRON VI premium fluid * Truck-style production oil pan * Production vent tube assembly * Approximately 23.5 in. long * Controller and harness, with calibrations for street and track * Harness also includes paddle-shift connection, transmission bulkhead connector that supports aftermarket gear indicator displays, electronically controlled shifters, and more * Chevrolet Performance-specific design includes provisions for an aftermarket transmission cooler, including -6 AN fittings
( 2 )
$5,182.26
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$5,038.95
—
$5,565.20
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 3 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 450 lb.-ft. of torque * 10 in. custom built billet converter with lock-up * Stall: 2,600 to 3,200 * Master overhaul kit with Alto hardened steels * Raybestos Stage I frictions * TransGo reprogramming shift kit with shift command * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * Complete Torrington bearing kit * New bushing kit * New reverse band * Alto Red Eagle wide O.D. band * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Rev. drum with heavy-duty mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly * Expanded capacity overdrive servo * Updated O.D. servo pin * Updated 3rd accumulator piston * Transmission mount * Custom 360-degree adjustable shift linkage arm
Not Yet Reviewed
$7,095.00
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$5,296.82
—
$7,204.82
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load
( 2 )
$8,264.82
—
$9,792.28
Clearance
TCI 6x 6-speed GM 4L80E automatic transmission packages are the first aftermarket 6-speed automatic transmissions capable of handling 850 hp. They give you six forward gears (2.97, 2.31, 1.57, 1.18, 1.00, and 0.75) for quicker acceleration and increased fuel economy at cruising speeds. The TCI 6x 6-speed GM 4L80E automatic transmission packages are versatile transmissions that fit Chevy small block, big block, and LS Series engines. They also feature a compact design, allowing them to work in a variety of vehicle applications, including pro touring, street, and race vehicles. The TCI 6x 6-speed GM 4L80E automatic transmission packages include a paddle shifter, wiring harness, dipstick, and transmission cooler. Choose the TCI transmission package that's recommended for your vehicle and engine application.
Not Yet Reviewed
$9,932.95
$6,949.50
TCI Super StreetFighter transmission packages are the perfect solution for street cruisers who want excellent street performance and long-lasting durability. Intended for normally aspirated vehicles powered by engines producing between 725 and 1,025+ hp, depending on the application, the TCI Super StreetFighter packages feature the many of the same benefits as StreetFighter transmission packages with certain internal upgrades, including higher performance friction clutches and bands, as well as heavy-duty hard parts. The Super StreetFighter transmission offers both manual and automatic shift options to give you the power and shifts you want for the strip, or easy driving for the street. The packages include the torque converter with furnace-brazed fins, needle bearings, hardened pre-ground pump hubs, Max Shift street performance fluid, a dipstick, and transmission cooler. With a TCI Super StreetFighter transmission package installed, you'll be ready to take on the streets—and beyond!
( 2 )
$5,119.95
Lincoln Electric Precision TIG 275 welders feature patented Micro-Start II Technology and Lincoln Electric's AC Auto Balance on-board, which deliver unrivaled starting and welding at low amperages and improved AC aluminum welding performance. New features, simple controls, innovative accessory storage, and attractive and consistent welds--they all add up. Whatever the TIG welding application--fabrication, aerospace, production, motorsports, or vocational education--choose the Precision TIG® 275 welders for outstanding features and precise arc performance. Their redesigned controls are simple and well-spaced for effortless setting changes, and their hidden menu button features up to 7 programmable parameters without cluttering the control panel (requires optional Advanced Process Panel, sold separately). The Auto Balance has been readjusted to have more penetration and improved bead appearance. Additional features include: * 115 V auxiliary power receptacles for powering an optional water cooler or power tools * Built-in storage compartment for torch consumables * Water-cooled torch connections with no adapters required--side mounted, out of the way, and well protected * Neat/organized cable management with integrated torch holster * Selectable welding modes such as high frequency, scratch start, and Touch Start TIG * Higher duty cycles--275A at 40 percent duty cycle * Widest welding range in its class, 2-340 amps for both AC and DC * Excellent stick welder--even with Fleetweld 5P with Automatic Hot Start and Auto Adaptive Arc Force controls (requires optional Advanced Process Panel, sold separately) * Fan-As-Needed (FAN) prevents overheating. FAN reduces power consumption, noise, motor wear, and dust in the machine * CSA C/US-certified
Not Yet Reviewed
$7,569.99
Summit Bucks
ProCharger P-1SC-1 Stage II supercharger systems deliver larger power gains, coolest charge air temperatures, and the greatest reliability. Thanks to many years of forced induction engineering and innovation, ProCharger technology offers extremely low charge air temperatures, that also provides much better engine longevity by protecting your motor from detonation. The P-1SC-1 Stage II supercharger systems are complete kits with their most-advanced, quiet, and self-lubricating superchargers, highly effective and larger air-to-air intercoolers, handheld programmer, and other components that create an attractive, OEM-quality installation. Cooler air makes more power, and ProCharger P-1SC-1 Stage II intercooled systems supply lots of it to increase horsepower and performance.
( 1 )
$8,299.00
—
$20,399.00
Set your Viper apart from the rest with a NOVI-2000 Viper supercharger kit from Paxton. The heart of these kits is the legendary NOVI-2000 gear-driven centrifugal supercharger, which combines nearly silent operation with unmatched dependability. They feature an integrated air-to-water, dual-pass charge cooler, a stand-alone timing control computer, a high-flow race bypass valve for surge-free compressor operation, and heat-resistant silicon duct connecting sleeves with premium-quality stainless steel clamps. A complete fuel system upgrade includes dual high-flow fuel pumps, a fuel control unit, fuel lines, and a wiring harness for safe, reliable operation. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger, even under sustained boost conditions. The supercharger drive systems include a tensioner and all of the necessary belts and pulleys, along with OEM-type cast aluminum mounting bracketry that securely mounts the units for a "factory-installed" appearance and rigid attachment. As if all of this isn't enough, the kits are compatible with factory OBD II engine management systems, are 50-state emissions legal, and include a reusable high-flow air filter. It's easy to see why Paxton has been a supercharging tradition for more than four decades.
Not Yet Reviewed
$12,943.99
GearStar Ford 6R80 Level 4 transmissions come with a custom billet Yank Performance lockup torque converter. This is the first of many upgrades that go into making sure that each transmission is built for performance applications to handle up to 750 crank horsepower or 700 crank foot-pounds of torque. These units have a brand-new valve body, brand new pump, billet intermediate shaft, expanded capacity clutches and steels, upgraded transmission cooler bypass valve, several valve body upgrades. They come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every Level 4 transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go! Ford 6R80 Level 4 transmission models are available for 4WD or RWD applications.
Not Yet Reviewed
$9,745.00
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 4 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 750 hp * Up to 550 lb.-ft. of torque * 10 in. custom built, custom stalled, multi-disc forged billet lock-up converter * Stall: 2,600 to 4,500 * Master overhaul kit with Alto hardened steels * Raybestos Gen II Racing frictions * High performance valve body reprogramming kit * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * High-flow filter * Complete Torrington bearing kit * New bushing kit * New reverse band * Carbon fiber wide O.D. band * 300M hardened intermediate shaft * Heat-treated and stress relived input shaft * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Wide reverse drum with mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly with new gears * Updated O.D. servo pin and piston * Updated dual O-ring 3rd accumulator piston * Custom 360-degree adjustable shift linkage arm * Transmission mount
Not Yet Reviewed
$8,095.00
BendPak 1302BA-302 digital pipe benders include BenPak's Deluxe 302 die package. Their 1302BA Series of pipe benders feature an ergonomically placed and highly sophisticated keypad display that can record bending patterns for accurate and repetitive use. In extremely busy shops, these automatic pipe benders will save time and make it easy to duplicate results. Features include: * 2 separate end-finishing units at rear for all necessary flaring and expanding * Knee control and depth-of-bend degree plate for manual bending operations * Comes complete with quick-release bending and finishing dies * Includes high-speed clampless swager and internal expander * Easy-to-use drop-in collar makes swaging operations quick and efficient * Twist-lock tooling * Integrated power-relief control valve * Pass-through cylinder stem passes completely through the primary frame * Rigid 6 in. x 6 in. x 3/8 in. welded-steel tube frame * Commercial-grade hydraulic cylinders * All cylinders feature chrome-molly shafts, conforming to ANSI 92.2 standards * Quick-release bending dies for reduced set-up times * Bending heads precision grounded to within .002 in. * Enclosed controls keep your bending area clutter-free * 2.5 in. oversized barrel shafts for maximum dependability and minimum maintenance * Standard grease fittings allow for simple lubrication * NEMA-rated on/off switch box incorporates overload relays that automatically disrupt power supply should an unforeseen over-current situation occur * Pressure gauges let you know exactly what the system pressures are at all times * Industrial grade casters help you easily move the bender around your shop * Adjustable pressure valve located right up front * One-piece barrel ensures that the bending gates stay perfectly aligned with the ram * Heat-treated tooling for greater service life * Convenient tool trays keep your tooling organized * Strong, 5 hp Baldor energy efficient motor delivers maximum performance * Direct-drive, high-speed, 4 gpm pump * Single enclosed bottom cylinder applies pressure evenly to the back gates and, because it is hidden, does not interfere with the tubing * Large capacity fluid reservoir keeps the hydraulic oil running cooler and prevents contamination * Canister oil filter in the hydraulic system keeps the oil nice and clean * Oil sight-gauges allow you to visually inspect oil levels * Oversized 1/2 in. high-pressure hose provides better speed and cooling * Open-sided swager box allows for easier access and reduces the chance of "crashing" tools and damaging the cylinder
Not Yet Reviewed
$13,595.00
ProCharger P-1X high-output supercharger head units feature the robust, self-contained gearcase that is standard on most ProCharger models, but with a new aerodynamic compressor design. They create cooler-charge air temperatures and more horsepower at the same boost level and step-up ratio as their industry-standard supercharger kits (P-1SC-1 and D-1SC). This higher efficiency design is engineered to be a bolt-in replacement for both of those—they fit in the same brackets—and offers greater maximum-power potential. The compressor side of these superchargers (the volute and impeller) was redesigned with greater efficiency and less parasitic engine load in mind. This produces less heat and power needed to spin the impeller—and that adds up to more horsepower. Bolt-on some of the largest street-legal power gains available with a ProCharger P-1X high-output supercharger system. Additional features: * 10-15 flywheel horsepower gain on otherwise stock, modern V8 automotive engines at the same boost level and pulley size (versus P-1SC-1 models) * Larger gains possible at the same boost level with built and modified motors * 875-plus horsepower-capable * Designed for today's high-flowing modern V8 engines producing 300-plus naturally-aspirated horsepower * Available as optional upgrade with ProCharger systems and tuner kits * Highly-durable, high-horsepower designs with a compact, state-of-the-art 9.0 in. housing/volute * Available with standard or reduced-noise level * Slightly larger volutes than P-1SC-1/D-1SC models
Not Yet Reviewed
$8,909.00
Be Cool Extreme modules offer show-stopping looks and performance for your resto classic! If you want more bling than Be Cool Show & Go modules, their Extreme radiators provide the ultimate in American-made brilliance. They're available in a natural aluminum finish, or in show-polished assemblies with every component chromed or polished—to deliver extreme looks to your special ride. And their performance is, of course, super-cool! Be Cool Extreme module features: * Performance-grade dual 1 in. core polished radiator * Chrome plated high-torque fans with billet Extreme logo motor covers * Stainless steel electric and/or aluminum fan mounting brackets * Diamond-cut aluminum vented coolant recovery tank with Extreme logo * Machined aluminum Sure-Grip radiator cap with embossed emblem * Wiring harness with temperature control sending unit and 40 amp relays * Various radiator style options, including crossflow and downflow
( 7 )
$5,199.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
