Availability
Showing In Stock Items. Show All 104 Items.
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 7 )
$5,128.95
Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$6,391.95
Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 18 )
$5,598.95
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$5,011.95
The S&S Cycle 124 in. big bore/stroker Hot Set-Up kits transform a stock Harley-Davidson® engine into a 124 in. monster. It includes: 4 1/8 in. bore pistons; big bore cylinders finished in wrinkle black powdercoat; a dynamically balanced 4 5/8 in. stroke 3-piece flywheel assembly complete with heavy-duty connecting rods and integral mainshafts; 640 gear drive Easy Start camshafts; chromoly steel adjustable pushrods; premium tappets; and Super Stock 91cc cylinder heads. When installed, the kits yield a 124 in. engine with a compression ratio of 11:1. Although the engine is .960 in. taller than stock, there are no frame clearance problems—and a stock EFI throttle body will fit, because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold. If you ride a 2006 HD Dyna model, or a balanced or non-balanced Big Twin from 2007-17, these top-end engine rebuild kits are for you. Note: No fuel or ignition system is included. However, for the best results, a larger EFI throttle body, performance intake, and performance exhaust are recommended. The EFI system must be recalibrated. Although not mandatory, S&S recommends adding an oil cooler to bikes ridden in warmer climates. S&S does not recommend compression ratios higher than 10:1 for Tri Glide or other 3-wheel models (including conversions) due to extra loads caused by the lugging nature of these bikes. Detonation and subsequent engine damage may result.
Not Yet Reviewed
$5,636.66
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a choice of black or polished pulley kits and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$22,699.00
—
$23,049.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$26,799.00
—
$26,899.00
BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a polished pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.
Not Yet Reviewed
$26,499.00
Blueprint Pro Series is for those wanting maximum horsepower and durability. BluePrint Engines Pro Series Chevy 572 c.i.d. 745 hp fully dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that has been fully dyno tested, passed vigorous inspections, and is ready to power up your project. Blueprint's Pro Series 572 Stroker GM-style drop-in ready engines are dressed with aluminum heads, forged pistons, forged crankshaft, a hydraulic roller cam, and a complete front accessory drive system with a polished or black finish (your choice). Additional features: * Tall deck with 4-bolt main (approximately .400 taller/wider than OEM block) * Forged H-beam connecting rods * Cylinder head specs: -- 119cc chamber -- 2.30 in. intake / 1.88 in. exhaust valves -- 358cc intake / 125cc exhaust runners * Camshaft specs: -- .698 intake / .698 exhaust -- 272 intake / 282 exhaust duration -- at .050 - 110-degree lobe separation * Installed accessory drive with A/C, P/S, alternator, water pump, belts, and pulleys * Dyno test results shipped with engine
( 1 )
$17,249.00
—
$17,349.00
BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.
Not Yet Reviewed
$21,249.00
BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy small block-compatible 383 (c.i.d.) engine that produces 436 horsepower, this standard edition builder series includes a polished pulley kit and 700R4 automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 443 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.000 in. * Main caps are 4-bolt * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.750 in. * OEM-style 5.700 in. connecting rods * Hypereutectic pistons * Weighted 8 in. harmonic balancer (BPP400L) Cylinder Heads: * BluePrint H8002K performance models (0.500 in. raised port vs. OEM) * Chamber – 64cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 195cc intake and 75cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.544 in. * Exhaust valve lift – 0.555 in. * Intake duration at 0.050 in. of lift – 230 * Exhaust duration at 0.050 in. of lift - 236 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees * Total is 32-34 degrees * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 700R4 package * Torque converter with 2,200 – 2,400 rpm stall * Weighted flexplate (one-piece, RMS) * Starter * Due to numerous tire/rear gear combinations, this transmission does not ship with a speedometer gear or sender housing Other Components: * Dual plane aluminum intake manifold with satin finish * Complete EFI system with pump kit * Spark plugs and wires (with separators) * Valve covers, oil pan, and timing cover * Oil filter * Front accessory drive with polished finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Factory 5 applications require a special order (please call). Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR compatibility.
Not Yet Reviewed
$17,999.00
Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp dressed stroker long block crate engines are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * New BluePrint cast iron block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast steel crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * Dual plane, satin aluminum intake manifold * Carburetor * Distributor * Valve covers * Painted oil pan * Brass freeze plugs
( 9 )
$10,449.00
BluePrint Builder Series 347W/415HP Standard Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 347 (c.i.d.) engine that produces 415 horsepower, this standard edition builder series includes a polished pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and steel crankshaft. Altogether, this assembly produces 415 lbs.-ft. of torque. When you need or want a new powertrain for your Blue Oval ride, go with the authority in crate engines and their BluePrint Builder Series 347W/415HP Standard Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.400 in. * Forged I-beam 5.400 in. connecting rods * Forged pistons * Externally balanced BPP28 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 65cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.543 in. * Exhaust valve lift – 0.554 in. * Intake duration at 0.050 in. of lift – 218 * Exhaust duration at 0.050 in. of lift - 226 * Lobe separation angle (LSA) – 112 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4R70W Transmission Package (built to 650 horsepower): * Electronic transmission controller and TPS harness for integration with controller and EFI * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This is a 4-speed overdrive transmission with lockup * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Pro Billet distributor * Mustang-style valve covers * Oil pan with 7-quart capacity * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) Note: Factory 5 applications are a special order (must call). Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$20,949.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$18,799.00
—
$18,899.00
BluePrint Builder Series 302W/365HP Bronco Edition carbureted crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 302 (c.i.d.) engine that produces 365 horsepower, this Bronco edition builder series includes a black pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 365 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Bronco, go with the authority in crate engines and their BluePrint Builder Series 302W/365HP Bronco Edition carbureted crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. (and forged 5.090 in. connecting rods) * Hypereutectic pistons * Externally balanced BPP50 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 60cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.533 in. * Exhaust valve lift – 0.544 in. * Intake duration at 0.050 in. of lift – 215 * Exhaust duration at 0.050 in. of lift - 220 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4WD-ready 4R70W Transmission (built to 650 horsepower): * Electronic transmission controller (TPS not included due to variable installations) * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This 4-speed overdrive transmission with lockup is specifically prepped for a 1966-76 Dana 20 transfer case (sold separately) * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Carburetor (600 cfm) * Distributor * Valve covers * Rear sump oil pan * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$18,099.00
Blueprint Pro Series is for those wanting maximum horsepower and durability. BluePrint Engines Pro Series Chevy 540 c.i.d. 670 hp fully dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that has been fully dyno tested, passed vigorous inspections, and is ready to power up your project. Blueprint's Pro Series 540 Stroker GM-style drop-in ready engines are dressed with aluminum heads, forged pistons, forged crankshaft, a hydraulic roller cam, and a complete front accessory drive system with a polished or black finish (your choice). Additional features: * Standard deck with 4-bolt main * Forged H-beam connecting rods * Cylinder head specs: -- 119cc chamber -- 2.30 in. intake / 1.88 in. exhaust valves -- 316cc intake / 124cc exhaust runners * Camshaft specs: -- .647 intake / .647 exhaust -- 248 intake / 254 exhaust duration -- at .050 - 112 degree lobe separation * Installed accessory drive with A/C, P/S, alternator, water pump, belts and pulleys * Dyno test results shipped with engine
Not Yet Reviewed
$16,049.00
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a polished pulley kit and TKX manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 5-speed TKX Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throwout bearing * Bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) * Torque converter with 2,200–plus rpm stall Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plug wires * Champion 3015 spark plugs (0.040 in. gap) * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys. Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$22,449.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,599.00
—
$25,699.00
BluePrint Builder Series 347W/415HP Standard Edition carbureted crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 347 (c.i.d.) engine that produces 415 horsepower, this standard edition builder series includes a polished pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 415 lbs.-ft. of torque. When you need or want a new powertrain for your Blue Oval ride, go with the authority in crate engines and their BluePrint Builder Series 347W/415HP Standard Edition carbureted crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. * Forged I-beam 5.400 in. connecting rods * Forged pistons * Externally balanced BPP28 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 65cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.543 in. * Exhaust valve lift – 0.554 in. * Intake duration at 0.050 in. of lift – 218 * Exhaust duration at 0.050 in. of lift - 226 * Lobe separation angle (LSA) – 112 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4R70W Transmission Package (built to 650 horsepower): * Electronic transmission controller (TPS not included due to variable installations) * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This is a 4-speed overdrive transmission with lockup * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Carburetor (600 cfm) * Distributor * Mustang-style valve covers * Oil pan with 7-quart capacity * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$18,849.00
BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and T56 trans combos. Product description and specifications: Block: * High-strength cast iron (LSX style) * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * Chamber – 69cc * 2.165 in. Intake /1.590 in. Exhaust Valves * 259cc Intake / 102cc Exhaust Runners Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other Components: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water Pump * Engine harness and ECU kit * Injectors and Fuel Rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611) not included. Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ rpm stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.
Not Yet Reviewed
$22,049.00
BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a choice of black or polished pulley kits and a T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and T56 transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 6-speed Transmission Package: * McLeod Super Street Pro twin-disc clutch * Steel bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.66:1 (first), 1.78:1 (second), 1.30:1 (third), 1.00:1 (fourth), 0.80:1 (fifth), and 0.63:1 (sixth) * Torque converter with 2,200–plus rpm stall Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.
Not Yet Reviewed
$26,709.00
Our Summit Racing™ 1972-93 Dodge truck Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your truck. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap mid-length headers, along with Lakewood engine mounts. A BluePrint Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Dodge truck. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor available with black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Camshaft specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$19,404.09
—
$19,504.09
BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy big block-compatible 632 (c.i.d.) engine that produces 815 horsepower, this standard edition builder Pro Series includes a polished pulley kit and 4L80E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 775 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.600 in. * Main caps are 4-bolt * One-piece rear main seal * Mechanical fuel pump provision * Tall deck (approximately 0.400 in. taller and wider than OEM block) Rotating Assembly: * New BluePrint forged crankshaft * Stroke – 4.750 in. * Forged H-beam 6.635 in. connecting rods * Forged pistons * Internal balance * Non-weighted harmonic balancer Aluminum Cylinder Heads: * BluePrint PS8012 performance models (0.300 in. raised exhaust port vs. OEM) * Chamber – 119cc * Valves are 2.300 in. intake and 1.880 in. exhaust * Exhaust runners are 358cc intake and 125cc exhaust * Builder must verify clearance of exhaust, shift linkage, steering components, etc. before ordering Camshaft: * Hydraulic roller * Intake valve lift – 0.698 in. * Exhaust valve lift – 0.698 in. * Intake duration at 0.050 in. of lift – 272 * Exhaust duration at 0.050 in. of lift - 282 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees (16-20 degrees for Dominator-style carburetors) * Total is 32-34 degrees (by 2,500 rpm for Dominator-style carburetors) * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 4L80E package with electronic controller (lockup capability) * Torque converter with 3,800–4,200 rpm stall * Non-weighted flexplate * Starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), 2.077:1 (reverse) Other Components: * Single plane aluminum intake manifold with satin finish * Complete EFI system with Aeromotive A1000 fuel pump * Valve covers, oil pan, and timing cover * Pro Billet distributor * Front accessory drive with polished finish (includes alternator, A/C, power steering, water pump, pulleys, and belts) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR-compatibility.
Not Yet Reviewed
$30,099.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
