Availability
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$799.00
—
$1,049.00
Fleece Performance TufShafts axle shafts are direct replacement upgrade shafts for any 2001-10 GM 2500-3500 with a 9.25 in. AAM front axle. They're designed to eliminate the stock passenger side split axle shaft that is prone to breaking under high torque situations, as well as the short drive side axle shaft that is prone to breaking under high torque situations. The TufShafts are made from high-strength HyTuf material for maximum strength and reliability. These heavy-duty load-bearing components transmit power from the transmission to the wheels. They are the link between the differential and the wheels, enabling your vehicle to move forward or backward. NOTE: TufShaft does not incorporate an axle disconnect, so the front driveshaft will spin when the vehicle is in motion; but with the front differential unlocked, the truck will turn and drive like normal.
Not Yet Reviewed
$945.00
Fleece Performance transmission cooler and line kits are drop-in replacements that deliver a massive 2 times increase in heat rejection and efficiency vs. stock! Control your transmission temperatures and tow with confidence with the latest improvement for your truck from Fleece Performance. Engineered from the ground up, these kits provide you with the most efficient and highest performing transmission cooler on the market, plus heavy-duty transmission lines and AN fittings for a leak-free installation. Fleece transmission cooler and line kits are the most complete options available to keep your rig running cool! Select the kit designed for your truck. Additional features: * Drop-in replacement for the factory transmission cooler * No cutting or splicing of OE lines * 20 percent increase in face area of the transmission cooler vs. stock * 100 percent pressure and leak tested
Not Yet Reviewed
$859.00
—
$899.00
Fleece Performance offers dual pump hardware kits for a variety of diesel trucks. Kits include all the components you need to begin the build of a custom Dual CP3 Fuel System on your 5.9L or 6.7L Cummins engine application. A Dual CP3 system adds an additional CP3 in conjunction with your factory pump so you can make the most of your aftermarket tuning, injectors, and other upgrades. Combine one of these Fleece hardware kits with a CP3 pump, spoked or solid pulley, Fleece fuel distribution block, and a hose and fitting kit to complete your fuel system (other components sold separately). Kit contents: * Cummins common rail Dual CP3 bracket * Cummins heavy-duty dual pump belt * Fan shroud bracket * Dual pump pulley – idler * Cummins dual pump idler pulley spacer * Cummins dual pump controller * High-pressure dual pump line (CP3 to CP3) * High-pressure CP3 fitting and non-return valve * (6) M8 x 1.25 flange nuts * (6) M8 x 1.25 × 50 carriage bolts * M10 x 1.5 x 40mm flange head cap screw * M8 × 1.25 flange head cap screw * M18 x 1.5 CP3 nut Features: * Easy install kit * Exclusive pump to pump line * Increased engine performance
( 1 )
$780.00
The Milwaukee M18 PACKOUT with VACLINK 9-gallon Dual Battery Dust Extractors set the standard for cordless dust extractors with strong performance and unmatched versatility. The automatic filter cleaning mechanism provides the highest sustained airflow to maintain productivity during dust extraction applications. This mechanism, paired with two HEPA filters, delivers OSHA Table 1 Compliance. The dust extractor tools have versatile power with corded and cordless capabilities for all-day productivity. With VACLINK, an integrated wireless dust control technology, compatible tools and remotes connect to the dust extractor, allowing for activation from the dust-producing application for increased efficiency. The POWERSTATE brushless motor delivers 125 cfm when utilizing M18 batteries (included in kit only) and 175 cfm when the unit is plugged-in. Two M18 REDLITHIUM FORGE HD12.0 batteries are required for operation (only included in the full kit with M18 charger). Please specify if ordering just the tool or if ordering the full kit with the included M18 batteries and M18 Dual Bay Simultaneous Super Charger. Product Highlights: * Optimized for concrete dust, drywall dust, and sawdust, the low flow indicator communicates if flow drops below optimal performance * Also capable of wet clean-up, water sensors indicate if the tank is full * Included 36mm x 10 ft. anti-static hose and attached hose clip connect to included power tool and table saw adapters that allow for efficient dust collection when paired with other tools * This extractor is PACKOUT compatible for convenient transportation and storage and offers ONE-KEY track and manage compatibility Bare Tool comes with the following components (except REDLITHIUM FORGE HD12.0 batteries and M18 Dual Bay Simultaneous Super Charger, included in full kit only): * M18 FUEL 9-gallon Dual Battery Dust Extractor with PACKOUT Compatibility and VACLINK * VACLINK Wireless Dust Control Remote * HEPA filter (2-pack) * 10 ft. Accessory Hose * Fleece Dust Bag * Power Tool Adapter * Table Saw Adapter
Not Yet Reviewed
$899.00
After you're done washing and waxing your favorite set of wheels give them a hug with one of the most luxurious indoor car covers from Covercraft--Custom Fit Form-Fit. These body-hugging vehicle covers have a super soft interior to pamper your fine paint finishes. The outer shell is woven polyester with Lycra/Spandex for stretch and shape retention while the inside fibers are 100 percent cotton terry loop for a fleece-like finish. Covercraft Custom Fit Form-Fit covers will also provide some ding and dent protection while parked in your garage and are highly breathable to prevent vapor and heat from becoming trapped underneath.
( 4 )
$762.99
—
$1,012.99
After your done washing and waxing your favorite set of wheels give them a hug with one of the most luxurious indoor car covers from Covercraft--Form-Fit. These body-hugging vehicle covers have a super soft interior to pamper your fine paint finishes. The outer shell is woven polyester with Lycra/Spandex for stretch and shape retention while the inside fibers are 100 percent cotton terry loop for a fleece-like finish. Covercraft Form-Fit covers will also provide some ding and dent protection while parked in your garage and are highly breathable to prevent vapor and heat from becoming trapped underneath.
Not Yet Reviewed
$762.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
