Availability
Showing In Stock Items. Show All 29 Items.
Too many varying types of hoses under the hood? Fragola Performance Systems Race-Rite hose is designed to be compatible with all pumped fluids, and capable of tight bend radiuses, as well as higher flow rates. It features an enlarged inner diameter with a smoothbore conductive PTFE core that utilizes a convoluted exterior and black aramid braid cover. This hose is available in multiple sizes and lengths to properly fit your application. Enjoy the simplicity of the ultimate fuel, ATF (automatic transmission fluid), and coolant non-pro hoses: Fragola Race-Rite! Features and specs: * Smoothbore conductive PTFE core is resistant to fuel permeation * 60 percent lighter than their 8400 Series black nylon race hose * True-to-size I.D. for improved flow rate * Works with all fluids, including ethanol-type fuels, ATF, coolant, and oils * Operating range -65 degrees to 500 degrees F * Ideal for use with Race-Rite crimp-on hose ends
( 3 )
$844.99
Vibrant Performance braided PTFE hose present endless ways to build your high performance fluid delivery system. They are available in many lengths and AN sizes with either a stainless steel or nylon braided covering that offers superior protection against abrasion and corrosion. The PTFE inner liner can handle higher operating temperatures, operating or burst pressures, and eliminates vapor fuel permeation. These race-proven hoses are suitable for all types of commonly used race fuels and oils, as well as brake, transmission, clutch, power steering, and coolant fluids. Vibrant Performance braided PTFE hose deliver outstanding quality and options to make your plumbing project a success.
( 39 )
$759.99
—
$1,099.99
Vibrant Performance braided flex hose are available in stainless steel and nylon braided covers which provide excellent abrasion resistance and surrounds a reinforced synthetic rubber inner liner. Offered in several lengths and AN sizes, they are suitable for oil, water, fuel, methanol, coolant, vacuum service, and E85. Note: These hoses are NOT suitable for use as brake lines or other hydraulic pressure lines, nor are they suited for extended submersion in fuel or oil (not recommended for in-tank applications).
( 83 )
$815.99
—
$999.99
On Sale
For the traditionalist, Russell offers their ProClassic II black hose. If your belief is that the hose you use to plumb your ride or racer should be black, then ProClassic II is for you. The all-black nylon fiber braid of the outer cover wraps around a CPE synthetic inner liner for abrasion resistance. Plus, the chlorinated polyethylene inner liner has a bonded, multi-braid stainless steel wire to improve the bend radius, with less possibility of collapsing when plumbing those tight areas. Safe for fuel, oil, antifreeze, and other fluids, Russell hose is easy to cut and easy to assemble. For classic looks and professional quality you can count on under the hood, choose Russell ProClassic II hose—available in a variety of lengths and AN sizes.
( 39 )
$751.95
—
$832.95
Too many varying types of hoses under the hood? Fragola Performance Systems Race-Rite PRO hose is designed to be compatible with all pumped fluids, and capable of tight bend radiuses, as well as higher flow rates. It features an enlarged inner diameter with a smoothbore conductive PTFE core that utilizes a convoluted exterior and black aramid braid cover. This hose is available in multiple sizes and lengths to properly fit your application. Enjoy the simplicity of the ultimate fuel, ATF (automatic transmission fluid), and coolant pro hoses: Fragola Race-Rite PRO. Features and specs: * Ideal in dry sump or high vacuum applications * Convoluted exterior with added spiral wire increases hoop strength to prevent hose sucking shut under high vacuum * Added externally wound, spiral wire increases flexibility and bend radius * Smoothbore conductive PTFE core is resistant to fuel permeation * 50 percent lighter than Fragola's 8400 Series black nylon race hose * True-to-size I.D. for improved flow rate * Works with all fluids, including ethanol-type fuels, ATF, coolant, and oils * Operating range -65 degrees to 500 degrees F * Ideal for use with Race-Rite crimp-on hose ends
Not Yet Reviewed
$791.99
—
$795.99
Made from special EPDM rubber, Continental OE Technology Series hoses last 5 to 10 times longer than regular hoses. Designed for heater hose applications that endure higher underhood temperatures and require a higher heater resistance. 2-Spiral Aramid reinforcing sleeve gives the hose a burst rating 10 times stronger than rayon-reinforced hose.
( 13 )
$925.99
Rein Automotive valve cover kits are designed and manufactured to be direct replacements for OE units. They contain common failure items, including breather hoses, oil caps, and hardware that need to be changed when the valve cover is replaced. Rein valve covers have identical dimensions as the factory originals—and are manufactured to strict engineering standards, using high-quality materials to prevent leaks and warping. A premium gasket is included with each engine valve cover kit. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$864.99
Level 7 Motorsports Pro Series 1973-87 C10 chassis brake plumbing kits were developed specifically for the popular Pro Touring Chevy C10 trucks, and designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look to your classic vehicle. The lines in Level 7 Pro kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they are covered with a special PVC coated material for maximum durability against debris and abrasion. All Pro Series hoses use stainless steel hose ends for many years of corrosion resistance and durability, and they are all DOT approved and crimped by the manufacturer. Included in each kit are the hoses from the Wilwood master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Additional details: * DOT-approved hose kit to plumb your factory 1973-87 C10 chassis * Can use stock front and rear brake hoses * -3 AN adapters included * PTFE hoses, stainless reinforced, and silicone coated * Black in color
Not Yet Reviewed
$774.99
Level 7 Motorsports' Pro Series brake plumbing kits offer a more budget-friendly option over their original chassis plumbing kit without sacrificing fitment and quality. These lines feature zinc-coated steel ends and standard vinyl-wrapped line clamps. Developed specifically for the popular 1967-87 Pro Touring Chevy C10 trucks, short bed and long bed styles, the kits are designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look on your classic vehicle. The lines in these Level 7 kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they're covered with a special PVC coated material for maximum durability against debris and abrasion. The hoses are all DOT-approved and are all crimped by the manufacturer. Included in each kit are the hoses from the master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Select the kit designed for your vehicle. Additional details: * DOT approved hose kit to plumb your factory 1967-87 C10 chassis * PTFE hoses, stainless reinforced, and silicone coated * Black in color * Select kits may include adapters, depending on your application, so stock front and rear hoses can be used * Optional rear whip hose bracket is available for use with rear mounted fuel tanks (factory bracket will interfere with whip hose if using a rear mounted tank) Notes: Brake calipers hoses and rear axle plumbing are not included. Front caliper outlet is relocated to the front of the subframe as opposed to the stock location behind the subframe. This keeps the front caliper hoses from binding.
Not Yet Reviewed
$769.99
John Dow air-operated oil delivery systems are complete fluid transfer pumps designed for 16- and 55-gallon drums. They include all required equipment for efficiently transferring motor, synthetic, and hydraulic oil, as well as automatic transmission fluid (ATF). These 3:1 ratio medium pressure systems include a delivery gun and a 10 ft. delivery hose (the 16-gallon package includes a drum cover). Order the size and options preferred for your application. Features, items, and specs: * Differential air motor ensures smooth pumping * Heavy-duty control valve * Air inlet pressure of 70 to 115 psi * Air inlet connection is 1/4 in. NPT (female) * Air motor effective diameter is 2.49 in. (63mm) * Max pressure of 348 psi * Outlet connection is 1/2 in. NPT (male)
Not Yet Reviewed
$754.99
Halletch Hornet cold air intake kits are designed for the C8 Corvette Stingray Coupe. These direct CAI replacements require no modifications and no tuning. They're dyno-tested for a 17+ increase in horsepower and 25+ increase in torque. Additional product details: * The stainless backplate ensures all harness fasteners and the antenna are attached in their factory locations * You will reuse your stock t/b connector hose, pcv fitting, left and right inlet ducts, and mounting bolts * The huge filter has nearly 1,000 square inches of filtration * Our molded-in velocity stack and reverse flow partition ensures laminar flow at the MAF sensor * Filter box is made from military-grade XLPE * Patent pending * Engineered and designed for the coupe (will not fit the hard top convertible without slight modifications to the cover under the trunk carpet)
( 1 )
$795.00
John Dow Diesel Carrytanks transport and transfer diesel fuel, wherever it's needed. These convenient refueling stations are self-contained tanks, each complete with a 12 V pump, 13 ft. hose, and automatic nozzle. They're great for use on farms, construction sites, industrial zones, fleet locations, and other markets. Features and benefits include: * Rugged linear polyethylene construction * Available in 58 gallon and 106 gallon capacities * 12 V transfer pump delivers fuel at 10 gallons per minute * Automatic dispensing nozzle * Integrated forklift pockets for moving the tank when full * Molded handles make it easy to lift and carry the tank when empty * Integrated recesses are provided for securing tanks with ratchet straps during transport * Equipped with protective and lockable cover * 106 gallon model includes space for tool storage when DEF tank is not being utilized
( 1 )
$849.99
Rein Automotive is the dealer alternative for quality OE parts. Their timing chain kits provide the proper fit and function to keep your vehicle running smoothly. They include covers, chains, guides, tensioners, and gaskets. Choose the kit designed for your vehicle.
Not Yet Reviewed
$936.99
The Right Stuff Street Series disc brake conversion kits feature all the quality components needed to convert your front or rear brakes to disc. Offered for both manual and power braking systems, Street Series kits are application-specific, maintain your vehicle's stock height or provide a 2 in. front drop, and are available with numerous component and finish upgrade options to make your braking system your own. So what's stopping you? Hundreds of kits are available; choose The Right Stuff Street Series conversion recommended for your vehicle.
( 18 )
$778.50
—
$960.15
Wilwood Dynalite one-piece rotor and hub front brake kits are your disc brake solution for your vintage ride. They are extremely versatile and can meet both the most demanding braking requirements of a street car and the most discriminating enthusiasts of a show car. Requiring no modification for installation, they provide plenty of clearance inside popular 15 in. wheels. Wilwood Dynalite one-piece brake kits come complete with rotors, calipers, a hub assembly, brackets, and all necessary hardware. If you're looking for a high-end performance brake kit, Wilwood has you covered.
( 18 )
$918.14
Are you sick of looking at your ugly, rusty wheels, but don't want to spend an arm and a leg replacing them? Well, Phoenix has the answer--get a set of these QuickCover wheel simulators. Made from highly polished, durable T304L stainless steel, these wheel covers provide years of great looks and trouble-free service. You can install them in minutes and they require no lug nut removal.
( 4 )
$779.99
For heavy-duty vehicles that are under extreme conditions or high mileage, you need to go beyond the OE specifications to have a product that will perform and go the distance. With a goal to always meet or beat OE quality standards, OSC Automotive Heavy-Duty radiators are designed and engineered with consistent attention to Quality Control, as well as extensive research and development. OSC also understands that it is very important that each part goes in as easily as the existing one comes out. So, their HD radiators provide a drop-in fit that looks and functions like the original unit. Choose the replacement HD radiator made for your commercial truck. Key features and benefits: * Many models have a welded double header design--reduces flexing * All "tabbed-over" models have a second crimp strip * Most applications come with mounting hardware * Superior stainless steel coolers replace OE aluminum * More than 50 models available with frames * Over 450 part numbers covering Class 8 trucks and forklifts
( 1 )
$776.99
—
$834.99
FAST has taken the next step in making EFI easier with these fuel system kits. They cover all street performance applications and most bracket and super class drag racing categories. FAST fuel system kits are perfect for those switching from carburetor to EFI, building new EFI engines, or simply upgrading their current fuel system. In one part number, they include everything you need to supply your state-of-the-art high performance fuel system. Best of all, the components used to create the FAST fuel system kits are made of aluminum and stainless steel to ensure years of long, trouble-free service. Kits include: * Fuel pump * Filter * Y-block(Depending on kit) * Fuel regulator * System fittings * Wiring harness
( 3 )
$838.95
March Performance Ultra Style serpentine systems are designed to convert your standard V-belt pulleys to a single ribbed serpentine belt. The kits are available for Mopar, Chevy, Ford, Oldsmobile, Pontiac, and Buick engines—so they are likely to have your application covered. These systems include billet aluminum pulleys that are clear powdercoated, along with the correct brackets and mounting hardware. March Performance Ultra Style serpentine systems are available with or without power steering to suit your specific vehicle.
( 11 )
$788.99
—
$908.99
Keep your engine cool and improve your vehicle's performance with one of Granatelli Motor Sports radiator expansion tanks. Built to match your exact requirements from 6061 T-6 aluminum for superior strength and styling, these one-piece tanks are much stronger than the factory plastic 2-piece design. On top of that, these coolant tanks feature a unique design that mimics the taper and angles of a factory engine cover for a more custom appearance and have a stock-style threaded neck to allow re-use of your factory coolant cap. Offered in different finishes, these overflow and recovery tanks will provide impressive styling in the engine bay. For performance cooling parts with increased capacity and heat transfer capability, a winning choice is Granatelli Motor Sports products!
Not Yet Reviewed
$881.11
Old school looks, modern performance, and advanced manufacturing all rolled into one—Trick Flow's® R-Series Tunnel Wedge intake manifold for Ford 390-428 delivers just that. Part of the original Tunnel Wedge's cool factor was its appearance, so Trick Flow® took special care to match the looks of the legendary OEM version while improving upon its performance. Trick Flow® was able to maintain the original carburetor locations—but on the inside of the manifold, Trick Flow® overhauled the port design for more airflow and incorporated a new O-ring sealed bottom plate. Cast in premium-grade A319 aluminum, the manifold is topped with carb flanges machined for original Ford FE Tunnel Wedge-style square bore carburetors. Mounting hardware is included.
( 4 )
$999.99
March Performance Ford Windsor serpentine kits are made to fit perfectly and handle high-torque and vibration. Matching serpentine pulleys are precision CNC-machined from 6061 T-6 aluminum and have a maintenance-free, clear powdercoated finish. These high-tensile strength pulleys will not fracture like common cast pulleys, since they are made for much longer wear. The high-wear areas are hard coated to "65" Rockwell (harder than steel)! Their street rod ratio increases water flow and fan speed, which is recommended for daily drivers. These kits are available for both standard and reverse-rotation water pumps and have an A/C option.
( 21 )
$783.99
—
$944.99
March Performance Chrysler 318-340-360 serpentine conversion kits swap out with your old low-performance V-belt pulleys with a 1 in. wide serpentine belt drive system. These high performance pulleys kits are precision CNC-machined from solid billet 6061 T-6 aluminum, then polished and clear powdercoated for a no-polish, maintenance-free finish.
( 14 )
$901.99
—
$980.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
