Availability
On Sale
Racepak flow meters provide accurate flow readings for both fuel and hydraulic clutch systems. These general purpose turbine-type flow meters, when used along with DataLink's math channel capabilities, allow you to monitor the health of your fuel pump, as well as confirm the function of your fuel system timers and system lean-outs. Also offered in low-flow versions, those designated as low-flow are recommended for carbureted applications and are calibrated in lbs./hr. unless otherwise noted. Racepak flow meters are available constructed from aluminum for gasoline and nitromethane, and in stainless steel for methanol fuel.
Not Yet Reviewed
$1,399.95
$909.95
On Sale
AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch
Not Yet Reviewed
$1,549.95
$1,007.95
On Sale
MSD programmable Midget ignitions help deliver every ounce of power from your Midget engine. They're a complete electronic distributorless system with a powerful capacitive discharge ignition control, and a four-tower, high output coil pack that uses two non-magnetic pickups with a trigger wheel. MSD has taken all of the mechanical variables out of the picture and given you exact ignition timing for more power, more control, and more performance. You can precisely program the timing throughout the engine's entire rpm range. Their programmable features include the ability to: Plot two timing curves ranging from 800-15,000 rpm in 0.1 degree increments, program a start retard for easier timing, select a rev limit from 2,000-15,000 rpm in 100 rpm increments, and switch between two timing curves as track conditions change during a race! These features can be programmed from a PC with MSD's Pro-Data+ software, or with the available hand-held monitor.
Not Yet Reviewed
$1,449.95
$942.95
On Sale
The name of the game in racing is traction, and keeping your tires firmly planted under all track conditions and surface abnormalities have become a science. Monitoring suspension deflection through shock absorber movement is the common method of tracking suspension and tire performance. Racepak users can employ these shock absorber travel sensors to monitor even the slightest amount of shock travel or tire shake. Shock travel graphs will provide you with the data you'll need to tune 'to the track' more precisely. These door car kits are available for front or rear shock travel. The front shock travel sensor kits contain two 4 in. linear shock travel sensors, two signal conditioning modules, and an analog extension cable. The rear shock travel sensor kits contain two 8 in. linear shock travel sensors, two signal conditioning modules and an analog extension cable.
Not Yet Reviewed
$1,449.95
$942.95
On Sale
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$885.99
—
$939.99
$797.39
—
$845.99
On Sale
MSD Pro Mag 44 ignition coils are a key part of MSD's Mag 44 ignition system for pro-level drag cars. There's more than a pound of high-quality copper wire wound around the molded DuPont Rynite core in every one, which allows them to handle the 44 amps of output from the system's companion magneto. These coils deliver 50,000 V of long-duration spark to the plugs to ensure that the nitro is ignited. For maximum vibration protection and reliability, the windings and all internals are completely wrapped in rugged epoxy. They're not for use with the Pro Mag 12.
Not Yet Reviewed
$1,399.95
$909.95
On Sale
The Edge Pulsar LT with Insight CTS3 Programmer is a new inline module for various Chevrolet and GMC applications—offering complete adjustability of many features, all from your steering wheel controls. Without modifying your truck's ECM, Pulsar LT offers you the ability to adjust throttle response, tire size, gear ratio, TPMS, and your top speed limiter. (Pulsar LT for Duramax applications can also be used to command a manual DPF regen cycle, automatic transmission relearn, clear DTC's and high idle the engine.) It connects directly to the vehicle computer system, making installation a breeze and leaving your factory warranty intact. Stepping it up one notch, this kit also includes the industry-leading Insight CTS3 monitor for all the live data you could ever ask for. The Insight is the most preferred digital gauge monitor in the market today, used by daily drivers and enthusiasts everywhere. It's the most comprehensive, state-of-the-art, multi-gauge touch screen display on the market. CTS3 is an instantaneous and inexpensive alternative to bulky, analog gauges that would otherwise cost hundreds of dollars and take hours to install. This is the perfect tool for those who want to monitor their vehicle's performance and prefer not to program their vehicle. It can also be intelligently configured to provide audible and visual alerts to help you protect your vehicle. A vehicle-specific A-pillar display mount is also included for a sleek, more permanent way to mount the CTS3 in the cab of your truck. These mounts offer an OE look, while keeping the monitor within easy reach without obstructing your view of the road. Order the model recommended for your vehicle and engine application. Product features: * Calibrate Tire Size (29 in. - 50.9 in.) * Adjust Throttle Response * Modify Gear Ratio (2.00 - 6.99) * Change Top Speed Limiter (98 - 140 mph) * Clear Diagnostic Trouble Codes * Transmission Relearn * Manual Regen * Reprogram TPMS Threshold (40 - 99 psi) * Simple Installation Process * Does Not Modify ECM
Not Yet Reviewed
$1,149.95
—
$1,249.95
$849.95
On Sale
Bully Dog ECM diesel tuners are designed to be stowed away after installation--simply set 'em and forget 'em. These powerful controlling devices are preloaded with three high performance, dyno-proven tunes that increase horsepower, torque, and fuel economy. They're built with simple, easy-to-use performance in mind, and can also read and clear diagnostic trouble codes. Give your rig the ability to tackle any challenge along the route with Bully Dog ECM diesel tuners. Features and specs: * Idle shutdown timer sets length of time vehicle will idle until the engine turns off to save fuel and extend the life of the turbo by allowing it to cool down before engine shutoff * Increase and decrease the set limit of the vehicle's cruise control saving time and money when crossing borders. * Speed limiter can be adjusted to automatically limit engine power * 75 to 100 hp gains possible in power mode * Free internet updates help assure that you always have the latest files for your vehicle * Fuel savings up to 12 percent and longer engine life * Adjustable options vary for each vehicle and are not available on all vehicles
( 1 )
$849.00
$764.10
On Sale
The Edge EZX module with Insight CTS3 is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed, helping to keep your warranty intact. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also enables you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. For the absolute best driving experience, pair EZX with the Edge Insight CTS3 to stayed informed of everything going on under the hood. EZX + Insight CTS3 kits give you everything you need to stay 'in the know,' including vehicle-specific A-pillar display mounts for factory fit and finish. Product features: * All-new EZX module and downloadable smartphone app * Insight CTS3 offers you the visibility to always know what going on under the hood * Includes vehicle-specific A-pillar mount for sleek OE styling and perfect CTS3 positioning * The EZX will allow you to control Power Levels and Engine High Idle through your steering wheel controls on-the-fly. All other features are controlled, enabled/disabled, or adjusted through the smartphone app.
( 1 )
$1,299.95
$999.95
On Sale
Juice up your rig with Attitude from Edge Products! Plus, get the added value of the new CS2 monitor! Edge Juice with Attitude CS2 programmers control the timing and duration of injector firing for your rig to deliver maximum performance, improved drivability, and better fuel economy. These plug-in modules are easy to install and come with factory-style connections. You'll be driven with on-the-fly adjustability and monitoring capabilities at your fingertips. You can monitor vital engine data, enhance your towing performance, and customize your Attitude to fit that of your own with the included Mystyle software. You control your rig's attitude with the right juice--Edge Juice with Attitude CS2 programmers.
( 2 )
$1,249.95
$799.95
On Sale
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$1,599.95
$879.95
On Sale
Edge Products' Juice modules with Attitude CTS3 programmers are the ultimate tuner for the average diesel owner and horsepower junkies too! Featuring state-of-the-art CTS3 technology, the Juice with Attitude offers a whole new realm of features to continue pushing the limits of on-the-fly power, control, and monitoring. This in-cabin controller not only monitors vital vehicle parameters but allows you to shift-on-the-fly by controlling the Juice module for maximum control and power gains. If you own a diesel truck and you're looking for complete control over your driving experience, look no further than Juice with Attitude CTS3 programmers. Additional product attributes: * Slim, sleek case with state-of-the-art swipe technology * 5 in. full color, high-resolution touchscreen with the latest swipe technology (with one-touch easy menu navigation) * Light sensitivity meter to dim screen as ambient light decreases * HDMI style plug for power and linking EAS accessories * Custom color mixer for gauge arcs, needles, and backgrounds * Multiple gauge layouts, including on-the-fly power level adjustment on screen * Wi-Fi updates and notification center * Multiple power levels for mileage, towing, daily driving, performance, and extreme power curves * Additional Hot Unlock available for some applications for an additional power level * Up to 180 hp and 400 torque gains, depending on application * Dynamic built-in safety features like EGT backdown, cold engine protection, transmission slip backdown and more Note: Some features may vary by make/model/year. Configure your vehicle to search for parts and features specifically for your application.
Not Yet Reviewed
$1,299.95
$999.95
On Sale
COBB Tuning Volkswagen Stage 1 Plus power packages are the next step of performance. In these kits, you'll receive the flexible, easy-to-use Accessport V3, plus one of COBB's SF intake kits. They pair nicely to provide reduced restrictions—allowing your engine to run more efficiently and enabling more overall power. The higher flowing intake also enhances the wonderful turbocharger sounds you love to hear. Couple your Volkswagen with a COBB Stage 1 Plus package for even more performance and power.
Not Yet Reviewed
$1,100.00
$990.00
On Sale
COBB Tuning Ford Stage 1 Plus power packages bundle the most flexible engine management solution with more clean, cold air to boost your vehicle's power and performance. Ford Stage 1 kits feature Accessport V3 that unlocks your vehicle's potential by replacing conservative factory settings with aggressive calibrations. To that COBB adds one of their cold air intakes (some are carbon fiber) with reusable, high-flow air filters to increase airflow. Finally, most of the Ford Stage 1 Plus power packages (Mustang Ecoboost not included) are completed with machined aluminum rear motor mounts to improve the traction of all that new found power. Upgrade your Ford Focus, Fiesta, or Mustang with COBB Tuning Stage 1 Plus power packages.
Not Yet Reviewed
$970.00
$873.00
On Sale
COBB Tuning Mazda Stage 1 Plus power packages deliver simple, bolt-on tuning solutions with clean, cool air for your engine to breathe, resulting in increased performance. Plus, you can upgrade your Mazdaspeed3 fuel pump internals to keep your fuel supply happy, and add rear motor mounts for increased traction of your newfound power. Packages are available for Mazdaspeed6, too. Order the kit designed for your vehicle application. Additional product features: * Accessport V3 includes OTS maps to make tuning quick and easy * SF air intake system—minimizes turbulence, while maintaining optimal flow * Air box—16-gauge aluminum with wrinkle black powdercoat * Autotech fuel pump internals * Turbo inlet hose—4-ply steel reinforced silicone * Billet aluminum rear motor mount * Mazdaspeed6 Stage 1 Plus packages only include Accessport V3 and SF intake system
Not Yet Reviewed
$915.00
$823.50
On Sale
COBB Tuning Mazda Stage 1 power packages are effortless bolt-on tuning solutions that produce power and torque increases, along with improved traction and reduced wheel hop. Mazda Stage 1 kits feature Accessport V3--COBB's comprehensive tuning solution that allows you to replace conservative factory settings with more aggressive calibrations, unlocking the hidden power within your vehicle. Bundled with the V3 is a high-flow, pre-oiled, washable air filter and machined 6061 billet aluminum, laser-etched rear motor mount to aid in getting your new-found power to the ground. Whether Gen 1 or Gen 2 Mazdaspeed, COBB Tuning Stage 1 power packages will give your car a boost in the right direction!
Not Yet Reviewed
$885.00
$796.50
On Sale
COBB Tuning Mitsubishi Stage 1 Plus power packages modify Evo X rides for increased performance, power, and response. These Plus kits begin with Accessport V3 that will replace conservative factory settings with more aggressive calibrations. And they allow you to upgrade forever with off-the-shelf calibrations for most bolt-on modifications. To that, COBB adds their one-piece composite SF intake system to save weight and reduce heat transfer. It's fitted with a custom conical cloth air filter element and a CFD-designed velocity stack to maintain optimal flow. COBB Tuning Mitsubishi Stage 1 Plus power packages are completed with their Evo X SF air box that will protect the intake from turbulence caused by the radiator fans, as well as heat radiating from the engine.
Not Yet Reviewed
$960.00
$864.00
On Sale
COBB Tuning Nissan Accessport V3 computer programmers are the most flexible, and easiest to use ECU upgrade solutions for your GT-R. They will unlock power hidden within your vehicle by replacing conservative factory settings with more aggressive calibrations. And you can follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps—or use custom mapping for any modification level. The Accessport V3s will be the last engine management solution you'll ever need. They are also available with TCM flashing. Order the programmer designed for your year/submodel application. Features and benefits include: * Larger, full color, higher resolution screen * Able to monitor up to 6 parameters in real time * Customizable multi-gauge display * In vehicle mount with on/off switch * Faster, easier to use * Interchangeable faceplates
Not Yet Reviewed
$875.00
—
$1,035.00
$787.50
—
$931.50
On Sale
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$939.99
—
$1,044.99
$845.99
—
$940.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
