Availability
Showing In Stock Items. Show All 106 Items.
Sierra Marine trim cylinder kits are designed for use in Mercruiser Alpha Gen II stern drives. These repair kits are for use with the front and rear trim cylinder. For more than 50 years, Sierra Marine has been unmatched in quality and backed by rigorous engineering, testing, and manufacturing standards to produce the best parts in the marine industry. Sierra Marine's commitment to excellence ensures the highest degree of confidence where it counts the most: out on the water. Order the kit for your application needs.
Not Yet Reviewed
$854.99
—
$1,063.99
Built ground up for Ultra4 rock racers, Spidertrax Off-Road Ultimate unit hub assemblies are truly the reinvention of the unit bearing itself. Genuine Timken bearings, full chromoly heat-treated construction, and a fully integrated drive slug makes the Ultimate unit bearing the only racing unit bearing of its kind—the last bearing you'll ever need. They use 5/8 in.-18 studs on a 5-on-5 1/2 bolt circle, designed specifically for Spidertrax 40 splined axle shafts. Drive cover sold separately. * Compact: With a span of just 2.125 in. from flange to wheel mount, the Spidertrax Ultimate unit bearing is the perfect fit for an Ultra4 solid or IFS (independent front suspension) axle. * Powerful: Spidertrax eliminated the need for a drive slug, packed in 40 splined axle splines, all while adding a 4.235 in. hub register for wheel centering and strength. * Secure: Spindle nuts are not only thread-locked into place, Spidertrax also uses a keyed lock ring. This means never having to worry about loosening spindle nuts.
Not Yet Reviewed
$799.00
These TCI paddle shifters are designed to work with any automatic 4 or 5-speed transmissions controlled by the revolutionary TCI transmission control unit. These shifters feature distinctive show-car styling and shifting performance that's perfect for track days or highway cruising. TCI paddle shifters communicate to the transmission control units through a wireless CAN signal with no worries about signal interference or disruption. The steering wheel mounted units operate by slim, 1/2 in. thick paddle shifters that instantly instruct the transmission as to your gear of choice without hesitation. These shifters fit all 5 and 6-bolt aftermarket steering wheels and come complete with server spacers of varying widths, allowing you to adjust the steering wheel location for your personal preference. Power for the TCI paddle shifter systems comes from the horn button relay rather than from batteries that must be replaced frequently. Additional features include: * Fit all 5 and 6-bolt aftermarket steering wheels and provide consistent, repeatable shifting for g-machines and touring cars * Work with any automatic 4 or 5-speed transmission controlled by the revolutionary TCI transmission control unit * Utilize CAN signal for gear selection without interference or hesitation; includes easy-to-read digital gear display powered by car horn connections * Easy-to-install, slim line, 1/2 in. thick paddles with stylish black anodized finish
( 2 )
$789.95
—
$972.95
Summit Bucks
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 501 )
$753.99
—
$1,013.99
On Sale
MSD Atomic transmission control modules are designed to adjust the operating parameters of later model electronically controlled 4-speed automatic overdrive transmissions. They're simple to configure with the supplied hand-held monitor--no PC required. You now have access to adjust shift points, adjust torque converter clutch behavior, select different levels of shift firmness, select between auto-shift and manual shift mode, and activate dyno mode to deliver repeatable chassis dyno results. The included hand-held monitor connects to them and can be left in place as a dashboard to monitor the transmission in real time, or can be disconnected when the configuration is complete. Once installed, these modules need only a few basic parameters to complete the initial setup. First, select the type of transmission you are using--all supported transmission types are listed in the menu. Other required fields include the number of engine cylinders, rear-end gear ratio, and tire height. Once this has been completed, you can now start and drive the vehicle, while taking advantage of the advanced setup menu items to dial-in the transmission to your liking. You can feel the results in real-time as a passenger manipulates the parameters and monitors the real-time data. Data available for viewing includes engine speed, vehicle speed, throttle position, transmission fluid temperature, shifter position, and commanded gear. Best of all, the MSD Atomic transmission control modules are available as completely stand-alone units or Brainwave-compatible for the Atomic EFI systems. A transmission controller harness is sold separately.
( 19 )
$899.95
$808.95
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$1,060.95
—
$1,217.95
FTI Performance ESR Series torque converters are designed for mildly modified vehicles. They're built using Torrington bearings, race-prepped sprague hardened impeller hub, hardened turbine hub and splines, a new steel pilot, and laser-cut mounting ring. These units are available in a variety of sizes, advertised flash stall ratings, and numerous other options. Order the torque converter recommended for your transmission application.
( 64 )
$799.00
Lokar electronic sport shifters allow you to take control of your automatic transmission whenever you desire. Just shift your lever from drive into sport mode and begin bumping through the gears. Lokar has maintained all of the safety features from their traditional units, and these sport-mode shifters are available for several applications in different shifter lever lengths and knob styles. Retain classic looks, while adding new technology with Lokar electronic sport shifters. Features include: * Positive lock-out in Park and Neutral * Neutral safety switch * Floor mount design, cable operated * Standard automatic with integrated "Sport Shift" mode * Works will all current Lokar knobs and adapters * Several lever lengths in straight or bend-styles available * Works with most aftermarket controllers * Cable-integrated bracket
( 24 )
$795.95
—
$872.95
FTI Performance MR Series torque converters are specifically designed for mud boggers needing an incredibly strong spragless unit without draining the bank. They're ideal for 400 to 1,200 hp weekend runners—and still perform well during occasional races. Features include a forged billet steel front cover, a billet spragless center, a hardened flanged impellor hub, and a steel anti-ballooning plate. Triple Torrington bearings, computer balancing, and furnace-brazed and heli-welded fins add to the list of reliable bulletproof MR Series parts. These converters provide excellent torque multiplication, better heat-dissipating oil flow, and impressive performance. Order the parameters desired and the model recommended for your transmission application.
( 2 )
$799.00
—
$849.00
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 5 )
$939.00
Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!
( 3 )
$999.99
If you use your ride as both a daily driver and weekend racer, you'll want the strength and reliability of FTI Performance SR Series torque converters. They're engineered entirely in-house at FTI and built to handle above-average power. These units feature TIG-welded furnace-brazed fins, a heavy-duty race sprag, and a hardened steel impellor. SR Series non-lockup converters include Triple Torrington bearings and a billet front cover for extra toughness. Each completed torque converter is pressure-checked and computer-balanced to ensure quality. Order the parameters desired and the model recommended for your transmission application.
( 14 )
$769.00
—
$819.00
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 23 )
$769.00
—
$884.82
Summit Bucks
Failure of the intermediate stub shaft and direct drum are almost inevitable when transmissions are pushed to the limit. To maximize durability and improve clutch capacity in heavy-duty/performance vehicles, Sonnax offers Smart-Tech direct clutch drum and shaft kits, the first upgrade to eliminate every critical weakness. Most failures in these units occur where the direct drum and stub shaft connect. Even other aftermarket upgrades that rely on a heavy-duty shaft will sheer in this area under extreme conditions. Unlike two-piece assemblies, the all-in-one Smart-Tech easily handles the highest horsepower/torque levels. The unique one-piece clutch drum with integrated stub shaft is precision machined from high-strength steel to guarantee there are no splines to strip from the drum or weaken the shaft. The shaft itself is significantly thicker and 2 times stronger than the original. Due to its larger diameter, the integrated shaft must be used with the kit's custom, heavy-duty sun gear. Insufficient holding power is another area where many transmissions fall short, but installing thinner aftermarket steels and backing plates to increase clutch capacity isn't ideal. Those components increase clutch pack flex and heat build-up, making them the primary cause of repeat burn-up. To improve both performance and long-term reliability, the Smart-Tech's custom drum and piston hold an OE backing plate and seven OE frictions for 17 percent more clutch capacity than the six-friction stack-up. Sonnax Smart-Tech direct clutch drum and shaft kits feature: * One-piece design that eliminates weak point where drum splines strip and shafts break * Rugged shaft is 50 percent thicker and twice as strong as OE * Custom drum and piston deliver 17 percent more clutch capacity with optimum protection against burn-up * High-strength drum and shaft are precision-machined from hardened 8620 steel * Unique sun gear is precision-machined from 9310, heat-treated steel
( 1 )
$754.00
—
$770.64
On Sale
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 137 )
$888.99
—
$1,249.99
$755.64
—
$1,062.49
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$855.95
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 64 )
$799.00
RAM Powergrip clutch kits offer your vehicle the perfect blend of drivability and performance. This dual-purpose clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 550 hp. All Powergrip kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip clutch disc features a combination dual-sided disc with RAM's premium organic facing material on one side and RAM's premium 900 series metallic facing material on the other side. This allows the Powergrip unit to deliver optimum street/strip performance. The RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 52 )
$799.00
RAM clutches for 'stock clutch rule' classes give you unmatched performance and durability. The 10.5 in. diameter assembly utilizes a billet aluminum pressure ring with a riveted steel heat shield that provides a durable mating surface for the clutch disc. A 3,000 lb. pressure spring provides increased static pressure over stock clutches. Used in conjunction with a RAM 6-paddle solid hub disc, this combination weighs in at just over 15 lbs. If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 lbs. to the total weight of the set. RAM offers a lightweight 17 lb. billet steel flywheel for Chevrolet that matches the above components. If you are required to use all-steel components, RAM offers a similar 10.5 in. pressure plate with a nodular iron pressure ring. This unit uses the same heavier pressure spring for increased holding power. All RAM street stock clutches are completely rebuildable.
Not Yet Reviewed
$829.00
—
$855.00
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$771.62
—
$1,039.97
Summit Bucks
Main shaft failure is a common problem in extreme duty GM TH400, 4L80-E and 4L85-E units. OE and aftermarket shafts simply don't hold up in extreme horsepower applications, leading to spline twist and shaft breakage. Sonnax replacement extreme duty main shafts are manufactured from an exceptionally tough high-strength Aermet steel alloy with proprietary heat treatment for unrivaled performance and durability. An advanced torsional design with spline and cross-hole refinements make these the most durable 1 in. main shafts available. These shafts withstood extensive track and lab testing with unbroken results in the most extreme applications. Additional details: * Recommended for applications above 1,000 hp * Top-notch engineering and precision manufacturing deliver unrivaled performance and durability in the 1 in. stock size * Rear spline prevents the rear internal gear journal-end from twisting off by engaging the full internal spline of the gear * Extensive in-vehicle and lab testing with unbroken performance
Not Yet Reviewed
$978.48
Summit Bucks
Sonnax heavy-duty automatic transmission output shafts allow energy to be absorbed via their torsional design, reducing peak power loads to critical areas. This, in turn, prevents shaft failure common in certain GM units. These steel output shafts are precision engineered and manufactured for unbeatable performance in high-horsepower street and strip builds. They're available in various lengths, and feature many unique refinements available only from Sonnax.
( 2 )
$774.01
If you have limited space or height restrictions and need the holding capacity of a dual disc clutch, the RAM Concept 9.5 is built just for you! The RAM Concept 9.5 dual-disc organic clutch kits meet the need for a smaller diameter or more compact, shorter design to fit in applications with limited bellhousing space. Building on the highly successful Concept 10.5 and Force 9.5 complete dual-disc systems, Concept 9.5 kits incorporate a billet stand design that allows the use of any RAM or other flat flywheel to facilitate installation. RAM Concept 9.5 dual-disc clutch kits feature: * 300 Series organic friction material for applications up to about 700 hp * A higher clamp load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Concept 9.5 units are ideal for applications, such as road race or autocross vehicles
Not Yet Reviewed
$939.00
RAM offers super-duty clutch pressure plates in a variety of styles and sizes. The Long Style is the preferred pressure plate for competition. Each unit provides a combination of static and centrifugal pressure, and these characteristics enable the clutch to meet the car needs and track conditions. Long style clutches provide additional pressure through centrifugal force of the levers against the pressure ring. Pressure plates are available in a variety of static pressures including non-adjustable, adjustable static, and counterweight to allow precise clutch tuning. All competition long units feature a heavy cover with spring guides. Order the model recommended for your year/make and engine application.
( 1 )
$969.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
