Availability
Nitrous Outlet X-Series nitrous oxide systems are the perfect solution for racers on a budget. They're made of the same high-quality parts as other Nitrous Outlet systems, and are available in universal and application-specific kits. Choose your nitrous delivery style, wet or dry, desired horsepower increase, jet sizes, and other options. X-Series nitrous oxide systems include everything you'll need for a clean installation and enhanced performance at the track!
( 26 )
$771.99
—
$1,081.99
Nitrous Outlet has a selection of nitrous oxide bottles made from powdercoated machined aluminum or lightweight spun carbon fiber that will add a show-quality appeal to your setup. They are available in capacities to suit many applications. Feed your vehicle power juice from Nitrous Outlet nitrous oxide bottles.
( 6 )
$1,099.99
Nitrous Outlet 4150 Stinger plate conversion kits come out of the box with everything you need to spray up to 600 hp. They feature a large, unique cone shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat, and they have 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 Stinger plate conversion kits include the 2nd generation 4150 Stinger plate, gasket, and 50-600 hp jetting. Overview: * 600 hp max flow * Single-entry * 4150 flange * 360 degree discharge pattern * Anodized billet aluminum stinger plate * Bracket, gasket, jetting, and hardware * E85 compatible with different jetting
Not Yet Reviewed
$960.99
—
$1,003.99
Nitrous Outlet Hot Bath nitrous bottle warmers are used by hardcore racing enthusiasts to heat nitrous bottles by submerging them in water—and using the electronic control module to dial in an exact temperature. This is the most precise method of heating a bottle to a specific pressure rating. The bath units will heat almost any size bottle and are meant for racers who need to heat several bottles. These heaters do not operate inside the vehicle; they must be plugged into a standard 110 V outlet to operate. Hot Baths are made from heavy gauge TIG-welded aluminum and are powdercoated for long-lasting oxidization protection. The edges have a thick rubber coating to prevent scratches to bottles; and a thick aluminum handle divides the unit into two sections. Prepare your nitrous for optimum performance!
( 1 )
$848.99
Nitrous Outlet heated nitrous bottle brackets can help keep nitrous pressure at optimum levels for a consistent flow, pass after pass. They offer several options, from bottle brackets only to kits with accessories, single or dual brackets, and vertical or horizontal styles. Also, you can choose simple brackets with quick-release clamps and aluminum cradles, or show-stopping machined 6061 billet aluminum brackets with quick-release knobs and rubber insulators. Safely warm your bottle for performance with one of Nitrous Outlet's heated nitrous bottle brackets.
( 3 )
$756.99
—
$1,075.99
Separate and specific, a setup just for your nitrous--dedicated fuel systems from Nitrous Outlet. A fuel enrichment system devoted to your nitrous removes the strain from your vehicle's stock system and gives you more control. These dedicated setups come with custom-built, lightweight, high-density plastic or heavy-duty, hand-welded aluminum fuel cells. A fuel pump, regulator, hose, fuel lines, and fittings complete the systems. Just about all of them are compatible with high or low fuel pressure by changing a spring inside of the fuel regulator, and they require no modifications to install. Create a distinct setup for your nitrous with Nitrous Outlet dedicated fuel systems.
( 1 )
$978.99
—
$1,050.99
Secure your nitrous bottle with Nitrous Outlet billet aluminum nitrous bottle brackets. Machined from 6061 billet aluminum, they offer several options, from bottle brackets only to vertical or horizontal single or dual bottle kits with cradles. You can also choose a show-stopping polished finish, quick-release knobs, and rubber insulators.
Not Yet Reviewed
$759.99
—
$812.99
Nitrous Outlet dual nozzle nitrous systems flow with power! Out of the box, these systems are ready to safely add big horsepower to your vehicle—but with additional jetting the dual-stage, dual-nozzle systems can add even more. These complete universal systems include everything you need for an easy, clean install. You have a choice of bottle capacities or no bottle with your kits. All include dry nitrous nozzles, nitrous solenoids, hardware, wiring, wide open throttle switch, solenoid brackets, main feed line, and dual nozzle jetting for 35-50-75-100-150-200 hp.
Not Yet Reviewed
$924.99
—
$1,016.99
Nitrous Outlet nitrous oxide hardline plate systems arrive out of the box ready to deliver superior atomization. These systems come with a hardline from the solenoids. Like the softline systems, they spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max-flow 400 hp billet aluminum plate * Wide-open throttle activation switch * Black powdercoated aluminum or steel bottle with bracket (included in some packages) * Hardware, hardlines, electric, and jetting included * E85-compatible with different jetting * Jetting included for 50-100-150-200 hp
Not Yet Reviewed
$1,040.99
—
$1,127.99
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$853.99
—
$1,127.99
Nitrous Outlet 4500 GENIII Stinger plate conversion kits come out of the box with everything you need to spray up to 500 hp. Their revolutionary extended-reach cone is the first in its class. The extended "Stinger" sits further down inside the intake plane to prevent nitrous from hitting the sidewalls on intakes with a high plane or spacer plate. You get all of the same great features of the Stinger II, in an upgraded package! The Stinger plate features a large, unique cone shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat. Each Stinger has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. The plates are CNC-machined from 6061 billet aluminum, have a black anodized body and a red anodized stinger, and are CNC-engraved with the Nitrous Outlet logo. Conversion kits include the GENIII 4500 Stinger plate, .122 nitrous solenoid, .187 fuel solenoid, Boomerang 2 solenoid bracket, gasket, and 50-600 hp jetting. Overview: * Revolutionary GEN III design * Extended reach cone * 600 hp max flow * 4500 flange * 360 discharge pattern * Anodized billet aluminum plate * E85-compatible
Not Yet Reviewed
$1,102.99
—
$1,129.99
Upgrade your current single stage system. Nitrous Outlet EFI dual-stage single nozzle systems are the simple way to add another stage of nitrous via their 1/8 NPT wet nozzle, break up a large shot, and keep the tires hooked up and going down the track nice and straight. They include everything needed to add horsepower to your late model EFI vehicle--hardware, wiring, jetting, solenoids, hoses, and nozzles. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. These complete race-proven Nitrous Outlet systems will convert your system to a true dual stage capable system.
Not Yet Reviewed
$1,072.99
Nitrous Outlet diesel nitrous single nozzle dry systems are available for both gasoline and diesel fuel setups. Most feature a boost activation switch that you can set between 1.5 and 20 lbs. This will allow you to control when the nitrous system is activated and spray up to 500 hp with additional jetting. These kits include everything you need to safely and easily install a dry nitrous system on your vehicle, such as hardware, electrical, jetting solenoid, lines, and more. They come with jetting for 35-50-75-100-150-200 hp.
Not Yet Reviewed
$883.99
—
$989.99
Nitrous Outlet 4500 Stinger plate conversion kits bring you a new 2nd generation Stinger plate that's capable of delivering up to 600 hp! They feature a large, unique, cone shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat. Each Stinger has 15 discharge ports for nitrous and 15 for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Their Stinger plates are CNC-machined from 6061 billet aluminum, they have a black anodized body and a red anodized stinger, and are CNC-engraved with the Nitrous Outlet logo. Nitrous Outlet 4500 Stinger plate conversion kits include the 2nd generation 4500 Stinger plate only. Nitrous Outlet 4500 Stinger plate conversion kits are designed to fit any carbureted or EFI single-plane 4500 flange intake manifold.
Not Yet Reviewed
$976.99
Nitrous Outlet ProMax Dual-Channel Progressive Controllers incorporate the system activation and safety functions of the WinMax—but adds numerous tuning and traction features that help you get the most out of your nitrous system. With the ProMax you can set rpm, time-based, or boost referencing progressive ramps for multiple stages while integrating wideband inputs. Additional features and benefits include: * Inputs for vehicle speed, trans-brake, MAP sensor, two wideband oxygen sensors, two nitrous pressure sensors, and one fuel pressure sensor * Two built-in 70 amp solenoid drivers can control two stages independently, or can be configured for closed-loop fuel control based on wideband oxygen input—with nitrous on one output and fuel on the second output * Progressive stage controls allow: adjustable frequency output of 10-30 Hz (by 1 Hz) for driving solenoids * Ability to be configured to vary solenoid duty cycle as a function of time, throttle percent (TPS), engine rpm, vehicle speed, manifold pressure (MAP) * Ability to set response of stage based on secondary arm switch input (arm/disarm) * Resume and restart feature option for controller—to resume an interrupted time-based ramp or start over based on TPS going out of range * Built-in rpm window switch with gear lockout feature * TPS or WOT switch activation * Data logging capable * Updateable Firmware * CAN Bus output * Two ignition retard outputs * Simple USB connection to PC/laptop * Optional 4.3 in. full touch screen display allows viewing of real-time data * Saved data logs can only be viewed on PC/laptop * Can save up to five different tuneups * Controller can be programmed via PC/laptop or optional display
Not Yet Reviewed
$1,098.99
Nitrous Outlet EFI single nozzle systems come with more jets to set horsepower exactly where you want it. They include everything needed to add horsepower to your late model EFI vehicle--hardware, wiring, jetting, solenoids, hoses, and a nozzle. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. Get Nitrous Express race-proven systems because of their quality components and extreme performance.
Not Yet Reviewed
$836.99
—
$1,129.99
Nitrous Outlet direct port nitrous systems are designed to be high-flowing for high-horsepower applications. These systems come with one nozzle per cylinder—capable of flowing 200 hp each—providing the most dependable way to ensure equal distribution of nitrous and fuel in each cylinder. The direct port systems are fully customizable, letting you personalize a nitrous setup based on your fuel type, fuel pressure, nozzle type, bottle size, and solenoids. If you need a high-horsepower nitrous application for your vehicle, you've come to the right place. Nitrous Outlet direct port nitrous systems will give you everything you can handle. Nitrous Outlet direct port nitrous systems are available with the following features: * Flow up to 800 hp * Work with 4, 6 and 8-cylinder motors * Available in wet or dry systems * Distribution blocks and injection rails * Dual and single stages * Jetting for 50, 100, 150, 200 and 250 HP * Include all hardware, fittings, and accessories
Not Yet Reviewed
$766.99
—
$1,128.99
The Quick Fix nitrous kit isn't the first of its kind, but Nitrous Outlet states it is the best! Nitrous Outlet Quick Fix nitrous systems are offered in wet or dry delivery systems with both allowing you to add nitrous and up to 200 hp to just about any EFI vehicle. Activation is super simple with Nitrous Outlet's pre-wired harness and high-amp push button. You literally only need to make two connections at the battery and plug in the solenoids--that's it! These nitrous kits utilize a single aluminum 1 1/16 in. 90-degree nozzle and a pair of solenoids with 3 AN hoses. The nitrous solenoid features a .078 in. orifice. Solenoids are attached to a custom universal laser-cut bracket that is black powdercoated, and nitrous jets are included to allow you to spray 35, 50, 75, 100, 150, and 200 hp. The bottle is pre-attached to a laser-cut 5052 aluminum plate in a high-quality duffel bag for the ultimate stealthy appearance, a 120 in. 4 AN main feed line supplies the solenoid, and Nitrous Outlet also includes a pre-terminated harness with alligator clips for the battery connection and a Deutsch connector at the solenoids. All you have to do is find a spot in the firewall to pass the harness through. The push button and cord are already wired in to the harness as well. Select the wet or dry kit with a 5 or 10 lb. bottle wanted for your vehicle's nitrous system. Key features: * Single nozzle system with 5 lb. or 10 lb. bottle * Duffel bag and mounting plate included * Push-button activation * .078 in. nitrous solenoid * Nitrous jets for 35 to 200 hp * The wet system also features: -- Fuel solenoid with .155 in. orifice -- Fuel jets for gasoline only for 45 to 55 psi fuel systems -- Two universal-type fuel adapters included that work with a good number of vehicles (fuel adapters for a direct-fit solution for your vehicle available separately) Note: Tuning--even though these kits are designed for a quick install, the basics of nitrous still apply. Remove 2-degree of timing for every 50 hp increase and a 2-step colder (non-projected tip) spark plug will be needed for increases of 100 hp or more.
Not Yet Reviewed
$760.99
Nitrous Outlet Titanium Vortex Ti wet nozzles deliver precision machining and quality materials, ensuring reliable performance at high levels of power. Machined from titanium these nozzles can be installed in the intake and removed several times without damaging the threads. Vortex Ti wet nozzles have short bodies and can be easily positioned to reach through thick aluminum intakes. They are offered individually or in different quantities. Select the amount needed. Details and specs: * Race-proven design used in direct port systems spraying 800+ hp, providing industry leading atomization * Flows 200 hp * 1/16 in. NPT * Wet (N2O and fuel) * 3AN fuel and nitrous fittings
Not Yet Reviewed
$812.99
Nitrous Outlet EFI dual-nozzle systems deliver the nitrous in two locations for improved atomization over a single-nozzle system. Designed to work with any late model vehicle, these systems include everything needed to add up to 150 hp to your vehicle--hardware, wiring, jetting, solenoids, hoses, and two 1/8 NPT nozzles. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. These complete race-proven Nitrous Outlet systems have quality components for extreme performance.
Not Yet Reviewed
$987.99
—
$1,024.99
Nitrous Outlet EFI single Hydra nozzle systems are designed to work with any late model EFI application. These universal Hydra single nozzle wet nitrous systems feature a multi-discharge designed nozzle that is made for EFI applications where a nitrous plate is not available, or may not fit. The multi-discharge saturates the air intake charge, providing the best atomized mixture of nitrous, and fuel into the air stream. Nitrous Outlet EFI Hydra systems are capable of reliably spraying 35 to 250 hp of nitrous on your vehicle, and they include a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will help in preventing engine damage and lean spikes. Nitrous Outlet EFI single Hydra nozzle systems include everything needed to add up to 250 hp to your vehicle. They are offered with three different bottle capacities or without a bottle. Features and contents: * 1/8 in. NPT nozzle * All hardware and wiring * Jetting for 35, 50, 75, 100, 150, 200 hp settings * Nozzle * Limited lifetime warranty 400 hp solenoids * Hoses * E85 Compatible with different jetting
Not Yet Reviewed
$768.99
—
$1,074.99
Nitrous Outlet 4150 GENIII Stinger plate conversion kits come out of the box with everything you need. These 3rd generation Stinger plates have a large, unique cone-shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat. Each plate has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Order the model best suited for your application. Overview: * 4150 flange * 360 degree discharge pattern * Anodized billet aluminum plate * E85 compatible with different jetting
Not Yet Reviewed
$1,092.99
—
$1,109.99
Nitrous Outlet 4150 Race Stinger plate conversion kits come out of the box with everything you need to spray up to 600 hp. They feature a large, unique cone-shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat, and they have 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 Race Stinger plate conversion kits include the 2nd generation 4150 Stinger plate, .122 nitrous solenoid, .187 fuel solenoid, bracket, gasket, and 50 to 600 hp jetting. Overview: * 600 hp max flow * Single-entry * 4150 flange * 360 degree discharge pattern * Anodized billet aluminum stinger plate * Bracket, gasket, jetting, and hardware * E85 compatible with different jetting
Not Yet Reviewed
$1,015.99
—
$1,058.99
Nitrous Outlet roll bar-mounted heated bottle brackets are race-proven, quick-release units with a show-quality finish. Machined from 6061 billet aluminum, they offer aesthetic appeal, yet are tough enough to handle the hardest launches and shifts, holding a 10/15 lb. nitrous bottle securely to the heating element to ensure proper heat transfer and concise pressure. Bottle pressure is key in a well performing nitrous system, and helps keep a consistent flow of nitrous pass after pass. The quick-release knobs allow you to disconnect your bottle quickly and easily from the bracket heating combo, making bottle refills and changes fast and easy, while the included hex to wing adapter makes connecting and disconnecting the main feed possible without the use of tools. Nitrous Outlet roll bar mounted heated bottle brackets are available with or without an installation accessories kit, and in several roll bar sizes. Choose your preferred kit and size. Features and notes: * Heated base * Quick-release knobs * Rubber insulators * 17-amp draw * Holds any brand of 10 lb. and 15.lb. nitrous bottles * Can be installed in any make, model, or year vehicle with any brand nitrous system * Roll bar sizes available: -- 1 1/4 in. -- 1 1/2 in. -- 1 5/8 in. -- 1 3/4 in. * Bracket kits with install accessories will include all wiring and hardware needed, along with an adjustable pressure switch that automatically activates the bottle heater, a 4AN or 6AN swivel manifold for the pressure switch, and toggle switch.
Not Yet Reviewed
$788.99
—
$799.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
