Availability
Showing In Stock Items. Show All 58 Items.
Are you in need of an air-fuel-ratio monitor kit for your HP Tuned vehicle? Measure your AFRs with extreme precision using Ballenger Motorsports' AFR500v3 wideband control kits preconfigured specifically for vehicles using HP Tuners' software. As one of the most critical tools a tuner requires for properly calibrating a vehicle, the AFR500 air fuel ratio monitor provides professional grade measurement of air-fuel-ratio without breaking the bank. Ballenger AFR500v3 kits offer a linear analog output to be used as an input to engine control systems, gauges, or data acquisition systems. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. Key features and benefits: * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Display gasoline (standard) * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Digitally derived output with a higher resolution digital/analog converter * 4 times the measurement resolution (4096 increments compared to the previous 1024) * ASIC chips (a common point of failure from electrostatic damage) have been replaced with a custom board providing better protection and upgrade capabilities * Ability to display from 0.0 to 6.0 in lambda setting for better flexibility with alternate fuels, such as diesel * Ability to upgrade firmware for future sensor types * All harnesses, control units, accessories, etc. are backward and forward-compatible * Options are selectable at any time via internal jumpers * NTK Calibration grade sensor highly recommended for low AFR methanol applications
Not Yet Reviewed
$549.99
FAST has revolutionized the tuning industry with the most advanced, app-based, wireless air/fuel meters, in both dual and single sensor options. These kits use an underhood-mounted Bluetooth module, connected to Bosch LSU 4.9 oxygen sensors in one or both of your engine's exhaust outlets—giving you the full story on the state of your engine's tune. With the dual sensor unit, you can read both wideband oxygen sensors individually, or average them together for super accurate readings of the engine's true air/fuel ratio. Easy to use with any iOS or Android device, the FAST wireless air/fuel meter app includes a simple, built-in data logger that records up to two minutes of air/fuel and RPM data. Fuel calibrations are preloaded for measuring gasoline, all popular ethanol blends, methanol, diesel, and more. Advanced features include 0-5 V output for external data loggers and digital gauges. Additionally, a selectable module output is provided that can be used as: an RPM-activated window switch; a lean air/fuel ratio safety cut-off; or an innovative anti-theft feature. This would allow you to manually activate/deactivate a vehicle immobilizing relay—a simple way to protect your vehicle from theft! Additional details: * Monitor air/fuel ratio directly from any iOS or Android smartphone * Supports all popular fuel types * Clean install, no extensive wiring or permanent gauges needed * Includes oxygen sensor bungs and 39.37 in. of sensor wiring With features unlike anything else on the market, it's clear that FAST wireless air/fuel meter kits are the best choice for the serious engine tuner.
( 4 )
$734.95
Looking for a solution to measure your vehicle's air-fuel ratio with CAN configuration? Designed for professional tuners and DIY enthusiasts alike, Ballenger AFR500CANv3 wideband monitor kits provide plug-and-play digital CAN Bus messaging and the ability to configure for CAN-enabled systems with specific presets for HP Tuners, making them a seamless and convenient option for measuring air-fuel-ratio in your HP Tuned build. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. They come equipped with PC software for programming your CAN or OBDII message structure--no adapters or extra hardware are required for PC programming. Key features and benefits: * CAN flying lead and USB programming harness * PC software for full digital programmability * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * Display lambda * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * CAN specific manual addendum * HP Tuners/OBDII CAN connection * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Programmable CAN termination resistor * Sensor averaging filter setting * Oxygen percent output * Fault condition diagnostics * IP, pump cell current output * Sensor temperature output * Heater duty cycle output * Battery voltage output
Not Yet Reviewed
$639.98
JET Tools provides an extensive line of efficient band saws, and their JET 10 in. woodworking band saws are not only efficient, but also compact and filled with features found on bigger band saws. They feature an extra-large cast iron tilting table with a retractable extension wing for additional workpiece support and are built with a one-piece welded frame design to reduce machine vibration and flex. JET's woodworking band saws are equipped with a Poly-V drive system that provides maximum power transfer from motor to blade and reduces vibration, and includes a rigid steel stand so you can transition the band saws from the benchtop to the floor. If space is at a premium in your shop or garage, JET 10 in. woodworking band saws offer the ideal size with maximum performance to complete your projects. Additional features and benefits: * Aluminum extruded fence ensures smooth sliding action * Blade site window to view blade tracking * Dust port accepts multiple size hoses * Magnifying cursor enlarges measurement scale for precise fence location * Oversized, ergonomic knobs provide ease of use and maximum control * Quick-release blade tension * Upper and lower ball bearing blade guides * Rack and pinion blade guide adjustment with integrated locking knob for precise height control * Table tilting trunnion allows working angles from 0 to 45 degrees * Adjustable LED work light
Not Yet Reviewed
$669.99
HalTech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
Not Yet Reviewed
$550.00
MSD Power Grid Dual NTK Wideband O2 modules are plug-and-play units that monitor and record the air/fuel ratio (AFR) of internal combustion engines. These dual channel air/fuel ratio systems are designed to seamlessly interface with MSD's Power Grid system controller (sold separately). They come with an extension harness, the sensors, connectors, and other parts necessary to accurately measure the AFR of vehicles running on gasoline and fuel containing alcohol. Features: * Plug-and-play Power Grid module * Works seamlessly with additional MSD Wideband oxygen sensor modules * No set up or calibration required (free air calibration is optional for added precision) * Can be expanded to operate with a second sensor * Fully potted and sealed unit with automotive-grade connectors * 0.5 to 4.5 V analog output voltage for a gauge or data acquisition * LEDs to monitor system operation and health * High-speed data acquisition (when used with the Power Grid controller) * Back pressure compensated AFR when used with optional exhaust pressure module (sold separately)
( 1 )
$799.95
Turbosmart Gen-V WG50 Pro-Gate external wastegates are cost-effective, high-performing 50mm units. They provide extensive user configurability, world-leading extended thermal performance, fatigue resistance and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, the Gen-V features a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports—and provides a range of springs.
Not Yet Reviewed
$529.95
—
$534.95
Turbosmart Gen-V WG60CG Pro-Gate compressed gas wastegates are cost-effective, high-performing 60mm units. They're designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed-air WRC applications. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, optional liquid cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG60CG Pro-Gate compressed gas wastegates are engineered to win!
Not Yet Reviewed
$704.95
Turbosmart Gen-V WG50CG Pro-Gate compressed gas wastegates are cost-effective, high-performing 50mm units. They're designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed-air WRC applications. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, optional liquid cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG50CG Pro-Gate compressed gas wastegates are engineered to win!
Not Yet Reviewed
$559.95
Turbosmart Gen-V WG60 Power-Gate wastegates are cost-effective, high-performing 60mm units. They provide extensive user configurability, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG60 Power-Gate wastegates are engineered to win!
Not Yet Reviewed
$674.95
—
$679.95
Hooker LT Gen V turbo exhaust manifolds provide a simple and effective way to add a turbo to your LT-powered car or truck. They feature high-silicon-moly ductile iron, which is much more durable and retains more heat than fabricated headers, aiding turbo efficiency. Their compact design allows for better fitment in multiple applications and better spark plug access than many of their fabricated counterparts, plus they work with the most common LT swap parts. Hooker Blackheart LT Gen V turbo exhaust manifolds provide the basic building blocks to complete a custom turbo system for your GM Gen V LT engine. More product features and items include: * Designed to integrate with the most common LT swap applications and components * 2.5 in. V-band crossover connections provide a tight seal * Heat shield (where applicable) * Hardware (stainless steel V-band clamps, flanges, and header bolts where applicable)
Not Yet Reviewed
$649.95
Turbosmart Gen-V Race Port blow-off valves are small, lightweight, high performance components for forced-induction competition level engines. Featuring unique collar designs and internal flow structures, they are 46 to 50 percent lighter and 25 percent smaller than the competition, while flowing 330 cfm, making Turbosmart Gen-V Race Port blow-off valves the highest flowing BOVs of their type on the market. They are offered in several different anodized colors and versions to fit your race application. All are supplied with vacuum fittings, V-band assemblies, and installed springs. Additional features: * Billet 6000 Series aluminum construction * Quick-release V-band collar for ease of installation and removal * MIL-Spec hard-anodized valve guide and stem * High-temperature silicone Nomex® diaphragm * Twin 1/8 in. NPT pressure ports for convenient positioning * 2.0 in. inlet flows over 330 cfm * Collar secured cap for quick spring changes * Most Race Ports have blue spring rated -18 to -14 InHg installed * Female flange version available to suit other manufacturer's 50mm flanges (no weld-on fitting supplied) and is 46 percent lighter * HE (Hall Effect) sensor cap versions allow you to monitor blow-off valve position for diagnostic or tuning purposes * Supercharger-specific versions have a soft pink spring rated -4 InHg installed, so it can stay open at idle, when supercharger is still producing boost
( 2 )
$509.95
VS Racing offers a wide range of turbochargers for your horsepower-boosting target. Whether you need greater airflow for racing, some boost for the street, a higher A/R ratio for smoothness, or a low A/R ratio for the drag strip, VS has a turbo to enhance your performance. They're available in dozens of sizes, configurations, and other options.
( 21 )
$555.00
—
$749.00
GFB offers a range of high-flowing external wastegates that are small—the most compact size in their class—but are big on flow! These external wastegates are built to cope with the extreme conditions and the harsh environment that's associated with high-boost and exhaust temperatures. Key features include: * Most compact wastegate range on the market for easy installation in tight locations * Body, valve, seat and all mounting hardware is CNC-machined from high-temp stainless steel * Actuator housing CNC-machined from billet 6061 aluminum * Nomex-reinforced silicone diaphragm * Internal shroud protects valve stem from excessive heat and prevents carbon-related sticking * V-band clamp mounting system * Made in Australia under ISO 9001
Not Yet Reviewed
$594.00
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 986 )
$545.95
—
$549.95
AP Exhaust direct-fit catalytic converters will render your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering the most comprehensive coverage, they can provide direct-fit catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust direct-fit catalytic converters offer the quality, fit, and value to meet those concerns. Order the model designed for your vehicle application.
( 30 )
$520.99
—
$759.99
Garrett turbine housings can restore the efficiency of your turbo. When your housing shows signs of wear and tear, to avoid damage to other turbocharger components and loss of performance, replace it. Garrett offers a considerable selection of turbine housings in different volute types, materials—and in a variety of A/R and flange configurations to effectively direct exhaust gases into the wheel to gain the performance you desire. Whether you're replacing or upgrading, switching inlet/outlet options or changing A/R sizing, you can count of Garrett turbine housings to assist with your engine-boosting power project.
Not Yet Reviewed
$530.94
—
$699.50
Innovate's LM-2 digital air/fuel ratio meters combine an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The meters' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s' self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2s also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. With the provided LM Programmer software, these analog outputs may also be configured by the user. Innovate's LM-2s are available in single wideband and dual wideband O2 configurations. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool, read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card (included) * Playback log data on screen with powerful LogWorks software (included) * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
( 10 )
$555.99
—
$737.99
Not afraid of water, not afraid to race, not afraid to perform! Rugged Radios M1 Professional Race Series mobile radios with antenna are built to endure off-road racing's harshest environments. Designed from the ground up, the M1 is IP67 waterproof with an all-aluminum chassis to protect vital circuits from Radio Frequency Interference (RFI), improving performance and reducing noise. The large, clear, easy-to-read display provides quick access to programmable controls, and an intuitive user interface. The included accessory hub provides convenient remote access to the programming cable connection and a 3.5 mm external speaker output. Rugged Radios M1 Professional Race Series mobile radios have everything you need in a powerful, streamlined package. Features and contents: * Waterproof, IP67 sealed housing * Superior digital audio clarity * Digital/analog VHF band mobile transceiver * Powerful Mitsubishi Transmit (TX) amplifier * Clear-Hear Superheterodyne receiver * Programmable, quick-access controls * RFI reflective aluminum chassis * Large, easy-to-read LED display * Easy access remote accessory hub * Upgradeable firmware * 55 watts * M1-V radio, UNI-MAG universal NMO or magnetic mount, VHF 1/2 watt spring antenna
Not Yet Reviewed
$522.99
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$689.99
Summit Racing™ Pro LS turbo manifolds allow you to easily bolt a turbocharger to your LS engine. Built from heavy-duty cast stainless steel with features, such as extra-thick flanges, V-band crossover adapters, and built-in wastegate mounts, our Pro LS turbo manifolds can handle all the heat and horsepower you can throw at them. Features: • Universal turbo manifolds • Single or dual mount designs • T4 flanges • Built in 44 or 45mm wastegate flanges • 304 cast stainless steel • Fits all LS exhaust ports
( 9 )
$599.99
Hooker LS turbo exhaust manifolds allow a simpler way to add a turbo to your muscle car. Made from high-silicon-moly ductile iron, these manifolds are much more durable and retain more heat than fabricated headers. The manifold kits include stainless steel V-band clamps and flanges, heater hose heat shield, and header bolts. A turbo crossover tube is used to connect the two manifolds (sold separately). Hooker LS turbo exhaust manifolds are offered for driver and passenger side individually or as a set—and they work with most common LS swap parts (i.e. motor mounts, swap oil pan, and accessory drive systems) to provide the basic building blocks needed to complete a custom turbo system for your GM LS engine.
( 11 )
$689.95
Garrett vent external wastegates optimize the flow of exhaust gases, providing greater control and performance. They accomplish this by venting exhaust gas around the turbine stage of the turbocharger to regulate turbocharger shaft speed, and they are CFD tested for maximum flow, thermal efficiency, and optimum boost control. Their optimized actuation, stability, and temperature resistance offer superior durability. Garrett vent external wastegates are available in several sizes with anodized aluminum actuator covers in several colors. Springs (3 to 25psi), fittings, flanges, and V-bands are included. Select the size and color preferred. Additional features and specs: * Base pressure: 14.7 psi/1 Bar * Robust design for easy diaphragm replacement * Cap design makes spring changes and serviceability easier and more reliable to perform * Liquid-cooled actuator ports for use on severe application
Not Yet Reviewed
$587.99
—
$685.99
Turbosmart StraightGate50 vacuum wastegates are zero-offset butterfly-style units that allow enormous flow and almost linear control, and unparalleled boost control throughout the entire operating range. These high-flowing wastegates are simple to use, and packed with performance, flow, and features. The zero-offset butterfly valves are subjected to exhaust drive pressure equally on both halves of the valve, which pivots centrally, resulting in a self-balanced valve against any drive pressure. This means less work is required to act against even the highest drive pressures, and a wider tuning window is possible, no matter how the valve is actuated. The increased flow is achieved through the efficiency of a straight-through valve versus a poppet-style valve where the exhaust gas must be turned 90 degrees by the valve. Turbosmart pneumatic StraightGate 50s are available in a boost-based pSG50 6 psi or vacuum-based pSG50v 6 InHg versions. Both pneumatics take the electronic eSG50 version and simplify control via a traditional boost-based or vacuum-based actuator. Select the one you prefer. Key features: * 50mm (1.97 in.) butterfly-style zero-offset valve * 383.9 CFM/10.87m3 per minute flow * Stainless steel (630) butterfly and shaft * Stainless steel (347) main body * Stainless steel, heat-treated 431, V-band clamps * 6262 T-6 anodized aluminum bracket and actuator * Turbosmart unique locking collar ring * Base spring options from 6 psi to 42 psi * Suitable for single or twin port boost-based control * Stainless steel (N60) linkages and control arm
Not Yet Reviewed
$607.58
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
