Availability
Fab Fours' roof rack light face plates are the perfect fit for your vehicle. They are available in three sizes: 48 in., 60 in., and 72 in. lengths and will house additional lighting (lights not included). The modular design of these roof rack light face plates allow mounting wherever necessary. The plates have a 12-gauge steel construction with integrated zip-tie holes for provisions for wiring lights and are available in bare steel or a matte black powdercoat finish. These add-on accessories provide tie-down points and can accommodate four 2 in. x 2 in. square LED lights, two 50 in. light bars for the front of vehicle or two 50 in. light bars for the back of vehicle. Note: This is the face plate only for mounting to the vehicle roof rack. Roof rack itself and all lights and light bars are sold separately.
Not Yet Reviewed
$609.99
ZROADZ front roof LED light kits come complete with light, mounting brackets, wiring harness with fusible link, relay, switch, and all necessary hardware. The kits are offered with curved light bars, straight light bars, or roof top side-mounted pods. Packages are also available that combo light bars with top side-mount or A-pillar/hinge-mount pods for extreme auxiliary illumination. All ZROADZ light bars and pods have CREE LED chips, premium optics, and clean, crisp light output set in IP67/68/69 rated housings to provide extreme waterproof protection in off-road environments. ZROADZ front roof light kits feature laser-cut mild steel mounting brackets and a heavy-duty solid rubber gasket for a secure, watertight installation. Many of the roof brackets feature a patented through-bolt fastener that provides minimal exterior penetration and a convenient method to run wires into the cab without the worry of weatherstripping wind noise and leaks or other subpar wire routing methods. Choose the style and fit for your vehicle and order today from Summit Racing™.
Not Yet Reviewed
$589.50
—
$794.50
ZROADZ front roof LED brackets are laser-cut from 3/16 in. mild steel and finished in a low-gloss textured black finish to complement your vehicle with strength and style. The brackets feature ZROADZ's patented single through-bolt attachment and include a heavy-duty solid rubber gasket for a watertight seal. The patented thru-bolt fasteners provide a secure mount with minimal exterior penetration and a convenient method to run wires into the cab without the worry of weatherstripping wind noise and leaks, or other subpar wire routing methods. They are available to mount LED light bars and pods. Choose the appropriate ZROADZ light brackets for your vehicle.
Not Yet Reviewed
$679.50
The sun never sets on a vehicle equipped with Rough Country Black Series lights. Whether you want enormous lighting power or style or both, this line of LED lights is the perfect choice to illuminate your way. Rough Country Black Series offers a variety of lengths, shapes, and styles to equip your vehicle to "Command the Dark". Choose the lights you prefer for your vehicle. Black Series lights feature: * Durable diecast aluminum housings * IP67 waterproof rating * Wiring harness with switch * Most models have Moisture Breather technology to reduce moisture build-up behind the lens * 3-year warranty
( 1 )
$509.95
Purpose-built for your 2005+ Toyota Tacoma, All-Pro's Overland roof racks take quality, dependability, and functionality to the next level. Providing you with expansive rooftop storage, the roof racks will allow you to take everything you need with you on your next adventure. The roof racks are formed from strong, yet lightweight aluminum, and features a durable black powdercoat finish, and bolts onto the roof of 2005-current Toyota Tacoma vehicles with four attachment points (2 left, 2 right) to secure the rack. Wind noise is minimized through the thoughtful design of the front deflector. Roof racks are available with either a blank deflector or a lightbar deflector for compatibility with a 40 in. single row light bar (sold separately). Choose the Overland roof rack model you'd prefer. Features and benefits: * Roof rack has 5052 aluminum construction * Black powdercoat finish * Zinc plated hardware included * Four crossbars are included with the roof rack, and each crossbar is adjustable to meet your mounting needs * The crossbars are pre-drilled for RotopaX mounts, Maxtrax, Tred recovery boards, Quickfist clamps, and are easily customizable for other mounting needs * Crossbars have no crevices where debris may accumulate * Roof rack is compatible with most rooftop tents and cargo boxes * No drilling is required for roof rack installation * Lightbar deflector is compatible with a 40 in. single-row light bar (sold separately) and features 42 in. between mounting tabs Note: Load capacity—the roof rack is designed to support the equivalent of a rooftop tent with occupants. Load capacity will vary based on the number of crossbars used and their configuration. Consumers are expected to use sound judgment and common sense with regard to the loads they carry using this rack system. Purchase additional crossbars (P/N: AP-309339) for increased load capacity.
Not Yet Reviewed
$599.99
—
$699.99
On Sale
Oracle brackets and lights combos enable you to mount square or rectangular LED light pods/bars in various positions on your vehicle, such as the hood, pillar, upper or lower windshield, or lower portion. The auxiliary driving, fog, and/or flood/spot lights are available in different configurations for on- or off-road use. The vehicle-specific brackets feature welded steel construction with a weather-resistant coating. They attach directly to your vehicle without modification—and include waterproof connectors and mounting hardware. Order the bracket and light kit designed for your application.
Not Yet Reviewed
$799.00
$719.10
Designed with a spot, wide cornering (flood), or work/scene light pattern, Baja Designs S1 LED auxiliary light pods fill the shoes of a large light in a smaller package. S1s utilize a highly specialized reflector and LED combination to deliver 2,320 raw lumens, providing exceptional visibility whether you're off-roading, navigating through challenging terrains, or enhancing the aesthetics of your vehicle. Their compact size allows for easy installation within tight spaces for most any application in need of light, and their durable construction can withstand rugged environments, ensuring reliability in the harshest conditions. Baja Designs S1 LED auxiliary light pods are available in different housing colors and light patterns individually or in pairs that also include wiring harness. Choose the style and quantity to best suit your application. S1 LED light pods feature: * Hard anodized and powdercoated cast aluminum housing * Hard coated polycarbonate lens * Machined billet aluminum bezel * Stainless steel mounting hardware * Replaceable lenses and optics * Moisture Block protection—waterproof, rain proof, submersible * 5000K Daylight natural color—less drive fatigue * Only the black standard mount pods with "wide cornering" light pattern have an amber lens option. All other styles come with a clear lens only.
Not Yet Reviewed
$664.95
The AR40 V2 intensity LED light bars by ARB utilizes Hyperspot optics and advanced flood optics to intensify the light output of the 40 OSRAM LEDs (2 rows of 20) encased in a virtually indestructible polycarbonate lens and powdercoated, extruded aluminum body with high-pressure die-cast end caps. Refined optics used to focus and intensify the light output, as well as drive the OSRAM LEDs a great distance down the road, the Hyperspot technology also maintains clarity in the beam and controls the beam pattern to the correct area without spilling into unnecessary areas. For an integrated fit to your vehicle, different mounting kits are designed specifically for ARB bumpers and are available in three sizes to cater for different tube diameters. Each kit incorporates stainless steel fasteners. Select the AR40 V2 intensity LED light bar kit for your application needs. Key features and benefits: * High output OSRAM LEDs * Polycarbonate and hard-coated for scratch and UV resistance, the light covers protect your intensity light bar from the elements and are available in clear, amber, and solid black * Vibration tested to MIL810-STDG * Dust and waterproof to IP68 rating * Over and under voltage protection * Gore breather and integrated active thermal management * All fasteners are manufactured from stainless steel, with mounting hardware manufactured from a combination of aluminum and steel * For increased versatility, an alternative to the bull bar mount is the pedestal mounting kit, enabling fitment to the pan of an ARB bumper or a roof rack
Not Yet Reviewed
$662.00
Rough Country LED upper windshield light bar kits are easy-to-install and present the ultimate solution for adding an aggressive looking, forward-facing lighting system to your Jeep. With modern, stylistic design and superior strength, the included powdercoated mounts securely hold the 50 in. light bar between the top of your Jeep's windshield and roof, spanning the entire width of the roof and providing a killer look. Kits include: * Premium, flat-wound wiring harness with on/off switch * Brackets with laser-cut RC logo * Hardware
Not Yet Reviewed
$559.95
—
$669.95
Rugged utility meets bold style when you upgrade your ride with Rough Country's roof racks, a heavy-duty, eye-catching solution ready for Overland adventures or everyday hauling. These all-steel roof racks feature a durable construction with durable slats and an aggressive low-profile design for the ultimate balance of form and function. The corrosion-resistant black powdercoat and bold design elements give your vehicle an aggressive, good look even when the rack is empty. Rough Country also offers the roof racks in models with optional front-facing and rear LED lights for off-road illumination when you need it most. Whether you're heading out on an overland adventure or you just find yourself needing extra space to haul your gear, these all-steel cargo systems give you the freedom to haul gear on top of your vehicle without sacrificing cabin space inside. Best of all, these sturdy roof racks offer an easy bolt-on installation process, no drilling required. Select the Rough Country roof rack designed for fitment on your vehicle year, make, and model.
Not Yet Reviewed
$569.95
—
$749.95
Dee Zee's innovative Hex Series designs have expanded to roof racks for select 2- and 4-door Jeep Wrangler and Gladiator models. These 24 in. racks are designed to cover the front or rear doors, or you can purchase two racks to cover both sets of doors. Mounting is easy by installing onto the existing drip rails, no drilling required! The cross-bars move forward and backward for the perfect mounting location of light accessories, bikes, sailing gear, watercraft such as canoes, kayaks, or paddle boards, roof top tents and more! Features, specs, and benefits: * Durable aluminum construction with black textured powdercoat finish * Extruded hex tubes offer angular style * 24 in. roof rack can be fitted either above the front or rear doors * Adjustable (can be moved forward or backwards) * 24 in. wide x 60 in. long roof rack * 200 lb. weight limit (per rack) * Adapters included
( 2 )
$482.99
Off-road adventures require serious gear, and flimsy racks just don't cut it, especially for Polaris ADV 5 models. Rough Country's Xpedition roof racks are the solution. These heavy-duty racks boast features like adjustable cross rails, light bar compatibility, and a durable powdercoat finish. The slotted cross rails feature tracks that let you slide your mounts and accessories anywhere for a perfect, custom fit. For the adventurer who wants to navigate uncharted territory in the dark, the Xpedition roof racks have a beefy front section that can handle the addition of an LED light bar (sold separately). These all-steel roof racks also feature a tough powdercoat finish that protects against scratches, fading, and rust and uses top-quality stainless steel hardware to keep your rack looking sharp for years to come. In addition, the Rough Country Xpedition roof racks utilize existing attachment points for a stress-free, bolt-on installation that gets you trail-ready in no time. So ditch the flimsy racks and level up your Xpedition's game with a Rough Country roof rack—the ultimate partner for your off-road excursions that will let you conquer trails, blaze new paths, and look good doing it! Select the preferred model for your UTV.
Not Yet Reviewed
$609.95
—
$699.95
Rhino-Rack USA Heavy-Duty RL110 Roof Racks are the system of choice for vehicles that have protruding side gutters. Easy to install and remove, they're ideal as a non-permanent solution—yet offer great strength and durability. Utilizing tough, heavy-duty aluminum bars, these systems offer you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a traveler, cyclist, surfer or tradesperson, the RL110 roof rack systems have you covered. They're available in 1, 2, 3, or 4-bar kits for a wide range of applications. Additional notes: * Bars are available with a black powdercoat or clear anodized finish * Comes with security hardware * Strong and built to last * Suitable for light off-road use * Tested and approved to meet Australian Standards AS1235-2000
Not Yet Reviewed
$509.96
—
$764.94
Rhino-Rack USA Vortex SX roof racks are designed specifically for use with vehicle roofs that feature rails. Easy to install and remove, each system comes with the security hardware to protect your rack against theft. Engineered for ultimate cargo versatility, the stylish application-specific roof racks with sleek aerodynamics minimize wind noise and drag. These premium systems provide the additional hauling space you so often need. All aluminum bars include the VGS rubber strip, which adds protection for your roof racks and load. Many optional roof rack accessories can be added onto this system. Be sure to check out everything Rhino-Rack USA has to offer that can be added to crossbars to provide even further versatility for your Vortex SX Roof Rack. Select the model recommended for your vehicle. Key features: * Constructed from premium materials—strong and built to last * Quick and easy installation and removal * Comes with security hardware to protect against theft * Easy access to bar channel allows quick accessory installation * Suitable for light off-road use * Black powdercoat finish * Tested and approved to Australian AS1235-2000 standards
Not Yet Reviewed
$513.97
—
$533.99
Go Rhino SRM500 Series flat roof racks bring both function and style together, and include U-bolt clamps to mount rack to many styles of cross bars. The SRM500 Series is a flat roof rack with channeled aluminum cross bars to mount accessories like shovels, axes, quick fist clamps, paddleboards, kayaks, tents, bicycles, and other adventure gear. Designed using state-of-the-art technology, and made of quality materials to serve you for years to come, the SMR500 Series flat roof racks by Go Rhino will meet your needs and deliver great quality at an affordable cost. Order your Go Rhino SRM500 Series roof rack today! Additional product features and details: * Heavy-duty aluminum construction with protective powdercoat finish * Versatile roof racks low-profile creates a reliable platform for convenient gear storage no matter the size or shape * Available in 55, 65 and 75 in. lengths (please specify when ordering) * Aluminum slotted crossbars allow for tools and attachments to be mounted inside the rack (tie-down points and aftermarket mounts help to secure gear) * LED light accommodations: front and rear cross members are predrilled for lights to be mounted (lights not included)
( 1 )
$654.99
—
$714.99
Aries Automotive platform-style roof racks are designed for off-roading and overlanding. If you own a Ford Bronco and are looking to add storage to the roof of your rig, these overlanding roof racks are designed to get your gear down the trail. The thick aluminum construction allows you to mount accessories such as cargo boxes, spare tires, pelican cases and gear, or even mount a kayak or canoe. Easily mount light bars and pod lights for 360 degrees of high visibility during night adventures with the side-mounted accessory panels. The platform-style roof racks feature thick, 1 1/2 in. aluminum tube construction for a robust rack that provides strength and durability—with the advantage of weight savings, which is ideal when loading up your rig for adventures and excess weight is a concern. Additionally, the aluminum construction is treated with a liquid E-coat chemical bath that prevents corrosion and promotes longevity. It's then finished with a durable, carbide black powdercoat that ensures maximum scratch and scuff resistance. This combination keeps your roof rack looking great for many adventures to come. Aries Overland roof racks are easy to transport and install. The thick aluminum platform-style design can be quickly bolted up using hand tools, making it easy to install and remove if necessary. Simply bolt onto the roof of your Bronco and you're good to go—no modifications, cutting, or drilling of the vehicle body are required. Racks are available for 2-door or 4-door models. Product notes: * Thick gauge, 1 1/2 in. aluminum tube construction provides reliable strength * Allows mounting of roof accessories for added storage and functionality * Allows 360-degree light bar and pod light mounting options * Side bracket accessories allow the attachment of many off-roading accessories * Liquid E-coat chemical bath treats the aluminum and prevents corrosion * Durable carbide black powdercoat finish for maximum scratch and scuff resistance * Easy bolt-on installation; no drilling or cutting required * Includes all necessary hardware for installation and step-by-step instructions
Not Yet Reviewed
$556.99
—
$612.99
Go Rhino Ceros low-profile roof racks deliver added functionality and cutting-edge style to your truck with easy, no-drill installation and Go Rhino's exclusive 4-CORE crossbars. Featuring aluminum construction, a textured black finish, and a 5 in. tall fairing with dropped front edge, the racks have a sporty, aerodynamic design that outlines the curves of your truck's roof with an application-specific fit. The 4-CORE crossbar extruded track system works with any 1/4 in.-20 hex bolt and offers unlimited mounting options for your accessories, gear, and tools. Go Rhino Ceros low-profile roof racks also allow you several lighting options to add illumination on the front and sides. Choose the rack designed for your truck. Features: * Fairing with dropped front edge allows most single row light bars to remain flush with frame * Four side panel slots with removable, rattle-proof mesh screens fit most 6 in. single row (SR) lights * Front 4-CORE rail supports front fairing and allows for easy, secure mounting of individual lights and light bars * No drilling required; all mounting hardware included * Limited Lifetime warranty on materials and construction * 5-year warranty on the textured black finish
Not Yet Reviewed
$864.99
Go Rhino SRM400 modular roof racks bring function and style together. These racks are fabricated steel baskets that come with solid front fairings to reduce wind noise and rear vented covers to allow air to escape reducing noise from turbulence. The front fairings and rear covers are also removable to allow storage of larger items or installation of different lighting styles. The SRM400 Series of racks are also designed with integrated side light mounts for standard cube stem mount LED lights. Additional features: * Galvanized steel fabricated panels * Extruded aluminum crossbars * Injection molded nylon crossbar end caps attach the cross bars securely to the fabricated side panels * Aluminum cross bars include a four-core extruded track system that works with any 1/4 in.-20 hex bolt * Universal U-bolt style mounting clamp system included * Texture black powdercoat for corrosion resistance * Available in three sizes
Not Yet Reviewed
$654.99
—
$774.99
Rigid Industries' A-Pillar Mount kit with D-SS PRO-Series Lights is designed for specific vehicles—and allows for a clean install of Rigid's high-output LED lighting. The kit includes mounting brackets, 40 in. SR-Series PRO single-row LED light bar with combination spot/flood optics, and a wiring harness. Professional installation recommended. Additional details: * Complete LED Light Roof Mount LED Light Bar Mount Kit * Stainless Steel Construction * UV and Abrasion-Resistant Powdercoat * 40 in. SR-Series LED Light Bar Included * Wiring Harness and Switch Included
Not Yet Reviewed
$508.99
—
$751.99
Go Rhino SRM600 Series tubular roof racks bring function and style together, and include U-bolt clamps to mount the rack to many styles of cross bars. Designed using state-of-the-art technology, the SRM600 Series tubular roof racks are fabricated with a heavy-duty aluminum construction for light-weight strength and feature a powdercoated finish for corrosion resistance. The roof racks 3-sided basket style design is flexible and functional for carrying a wide variety of luggage and gear, and their front platform is pre-drilled to offer mounting for a wide variety of lighting options. Order your Go Rhino SRM600 Series roof rack today. Additional product features and details: * 3-sided basket style roof racks (52 in. wide) * Available in 52, 55 and 65 in. lengths (please specify when ordering) * Crossbars feature 4-core design with 4 channels to mount accessories with standard hardware * 4-core design crossrails are also Quick-Fist compatible for easy mounting of trail tools * Pre-drilled front platform offers a wide variety of lighting options (light not included) * Compatible with Go Rhino roof mounting systems (sold separately)
Not Yet Reviewed
$774.99
—
$894.99
Traveler, cyclist, or surfer, Rhino-Rack USA Vortex Stealthbar roof racks will meet your needs. These low-profile roof rack systems sit a mere 1 1/2 in. (35mm) above factory raised rails. Easy to install and remove, they are ideal as a non-permanent solution, yet offer great strength and durability. The flush-style Vortex bars are cut to an exact length as determined by the width of your vehicle's roof, creating a stylish looking roof rack for your vehicle that is compatible with a wide selection of accessories. Features: * Ideal for low clearance * 50mm of adjustability per side * Removable * Easy to install/remove * Stylish * VGS bar strip greatly reduces wind noise * Strong and built to last * Suitable for light off-road use
Not Yet Reviewed
$503.97
Rhino-Rack USA Heavy-Duty 2500 roof racks are matched to fit the contours of your vehicle's roof. They're easy to install and remove—ideal as a non-permanent solution, yet offering great strength and durability. With special molded pads and custom-fit clamps tailored to fit your vehicle's door jamb curves, the HD 2500 roof rack is secure, strong and efficient. You can really relax behind the wheel knowing that your gear is safe. The 2500 roof racks are available in 1-bar and 2-bar versions for a wide range of specific applications. Additional details: * Santoprene rubber pads won't rub off onto your vehicle * Incredible strength due to glass-reinforced nylon legs * Aluminum racks are black powdercoated or clear anodized * MasterKey compatible * Lockable legs for added security * Simple and effective leg clamp attachment is easy to install and remove * 2500 features Rhino-Rack Heavy-Duty bars with wind noise-reducing VGS strips * Offers long-term performance * Suitable for light off-road use * Compatible with a wide range of accessories * Tested and approved to Australian Standards AS1235-2000
Not Yet Reviewed
$541.95
—
$788.93
Rhino-Rack USA Heavy-Duty RL150 Roof Racks are the system of choice for vehicles that have protruding side gutters. Easy to install and remove, they're ideal as a non-permanent solution—yet provide great strength and durability. Utilizing tough, heavy-duty aluminum bars, these systems offer you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a traveler, cyclist, surfer or contractor, the RL150 roof rack systems have you covered. They're available in 2, 3, and 4-bar kits for a broad range of specific applications. Additional notes: * Bars are available with a black powdercoat or clear anodized finish * Comes with security hardware * Strong and built to last * Suitable for light off-road use * Tested and approved to meet Australian Standards AS1235-2000
Not Yet Reviewed
$509.96
—
$815.94
Rhino-Rack USA Heavy Duty RL210 Roof Racks are the system of choice for vehicles that have protruding side gutters. Easy to install and remove, they're ideal as a non-permanent solution—yet provide great strength and durability. Utilizing tough heavy-duty aluminum bars, these systems offer you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a traveler, cyclist, surfer or contractor, the RL210 roof rack systems have you covered. They're available in 2, 3, and 4-bar kits for a variety of applications. Additional notes: * Bars are available with a black powdercoat or clear anodized finish * Comes with security hardware * Strong and built to last * Suitable for light off-road use * Compatible with a wide range of accessories * Tested and approved to meet Australian Standards AS1235-2000
Not Yet Reviewed
$535.96
—
$827.93
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
