Free Shipping on Orders Over $125 at Summit Racing

Black Rhino Chamber Matte Black Wheels

Black Rhino Chamber wheels feature an off-road rally-inspired mesh design that's inset in an angular, sculpted lip and further accentuated by a deep bowl concave profile. The various shapes, notches, windows, and spokes combine for unmatched strength and style—all complemented by the rich matte black finish. These one-piece aluminum wheels are available in a variety of widths, diameters, bolt patterns, and other fitment options.

Not Yet Reviewed

$515.00

Clearance

American Racing VN327 Rally Gray Painted Wheels

American Racing VN327 Rally gray painted wheels bring a stylish retro look to your vehicle. The 2-piece cast aluminum gems feature five oblong cutouts, a matte gray interior, and a brilliant polished lip. Turn back the clock with these muscle car heyday wheels!

Not Yet Reviewed

$642.00

$549.50

Exedy Lightweight Flywheels

Exedy lightweight flywheels combine low weight, low inertia, and high thermal capacity. They're designed for light to moderately tuned racing cars for drag racing, autocross, and rally events, as well as street usage. The flywheels are made from solid one-piece billet chromoly steel or chromoly steel forgings. These replacements are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the airflow, which improves the cooling of the clutch. The ring gear teeth are integrated onto the flywheel, unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and has the possibility of separating from the flywheel due to the different expansion coefficients of aluminum and steel. Newly available are lightweight, solid replacements for vehicles fitted with OE dual mass flywheels. Exedy lightweight flywheels have passed engineering tests to 15,000-18,000 rpm. They're guaranteed not to fail to the said RPM, and are all SFI approved. * Material: All Exedu lightweight flywheels are made from either forged or billet chromoly steel. Chromoly is an abbreviation for "chromium-molybdenum steel" due to its property of incorporating alloy elements chromium and molybdenum. Thanks to this combination of materials, chromoly has an excellent strength to weight ratio and is considerably stronger and harder than standard 1020 steel or other aluminum flywheels on the market. * SFI certification: All Exedy Stage 1 Organic, Stage 2 Ceremetallic and Lightweight Flywheels carry SFI 1.1 Certification. Which means, when you buy these products, you can be confident they're certified for use in competitive motorsports. * Resurfacing Exedy flywheels: Resurfacing your Exedy lightweight flywheel during a clutch service is an ideal way to extend the life of your clutch and flywheel. Thanks to the nature and design of the Exedy flywheels, no special steps or tools are needed to perform the service. All you should do is follow the OEM service specifications to return your Exedy flywheel to "like new" condition.

Not Yet Reviewed

$579.86

—

$733.99

Competition Clutch Ultra-Lightweight Flywheels

Competition Clutch steel flywheels are made of 4140 forged steel and are one-piece designs, which helps significantly in reducing the chances of ring gear separation and friction surface warpage. Forged steel flywheels work with all performance and stock clutch assemblies, and can be resurfaced. Competition Clutch Ultra-lightweight steel flywheels are recommended for forced induction and/or track and rally racing applications. They are machined with less material to assist in quicker revving capabilities, and are well suited for Stage 3 and up clutch applications.

Not Yet Reviewed

$595.00

Tilton OT-II Cerametallic Pressure Plates

Tilton OT-II cerametallic pressure plates offer low moment-of-inertia, high torque capacity, and the reliability necessary for championship performance. From the extreme street/strip machine to off-road to rally and road racing, these pressure plates service you with the ability to tune your clutch to your application. These Tilton assemblies feature open one-piece clutch covers that provide low operating temperature, high strength, and minimal deflection, diaphragm spring, floater plate(s), and your choice of high or ultra-high ratio pressure plate options. Successful shifts start with Tilton OT-II cerametallic pressure plates.

Not Yet Reviewed

$624.75

DIYAutoTune MegaSquirt MS3Pro EVO Standalone Engine Management Systems

DIYAutoTune MegaSquirt MS3Pro EVO standalone engine management systems are scaled up, more capable units due to the shared technology with their big brother, MS3Pro Ultimate. EVO ECUs by AMP EFI do not have peak and hold injector drivers, but they do share some increased I/O, an onboard 4-bar MAP, barometric pressure sensor, and 5 diagnostic LEDs. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro EVO ECUs will deliver winning control. MS3Pro EVO ECUs feature configurable inputs/outputs: * 10 high-impedance injector outputs * 8 logic level spark outputs * 3 PWM outputs * 2 digital outputs * 7 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro EVO standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware

Not Yet Reviewed

$674.99

South Bend Clutch Stage 2 Endurance Clutch Kits

South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings

3.0 out of 5 stars ( 3 )

$500.17

—

$749.16

South Bend Clutch Stage 3 Endurance Clutch Kits

South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.

5.0 out of 5 stars ( 2 )

$501.32

—

$735.70

SPEC Stage 3 Plus Clutch Kits

SPEC Stage 3+ clutch kits are primarily intended for street use, drag racing, pulling, and autocrossing. As the flagship stage for a high-powered street or race car that requires a manageable and friendly engagement, Stage 3+ clutch kits feature carbon-graphite full-faced material that offers unparalleled life, friction co-efficient, and drivability in one package. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3+ clutch kits: * High-clamp pressure plate * Carbon semi-metallic friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting

3.0 out of 5 stars ( 4 )

$545.99

—

$710.99

SPEC Stage 2 Plus Clutch Kits

SPEC Stage 2 Plus clutch kits are designed for street, drag race, pulling, and autocross use. They feature a multi-friction disc in a full-faced configuration with carbon semi-metallic material on one side and Kevlar® on the other. Bridging the gap between SPEC Stage 2 and Stage 3 clutch kits, the 2+ offers drivability and engagement quality characteristics of the Stage 2, but with a 15 to 20 percent higher torque capacity. Hubs are double-sprung with spring cover reliefs for flexibility—and heat-treated components for strength and durability. More than 700 models are available for vehicle-specific applications. Additional features of SPEC Stage 2 Plus clutch kits: * High-clamp pressure plate * Hybrid carbon-graphite and Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting

3.43 out of 5 stars ( 7 )

$538.99

—

$715.99

SPEC Stage 1 Clutch Kits

SPEC Stage 1 clutch kits are designed for street, drag race, drifting, road race, rally, pulling, and autocross use. They feature integrally molded carbon-Kevlar® based, high performance organic linings that offer smooth engagement and excellent life. These linings have an integrally bonded steel backing for strength under high clamp loads and temperatures. Hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand different kits are available for countless applications, from the 1940s and up. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Steel-backed and multi-compound woven organic material * High-torque sprung hub and disc assembly * Best for street and many track and off-road applications

4.26 out of 5 stars ( 19 )

$576.99

—

$647.10

SPEC Stage 4 Clutch Kits

SPEC Stage 4 clutch kits are solid hub versions of their Stage 3 clutches. Each hub is solid with eight rivets and the assembly is heat-treated for strength and durability. They are available in a 3, 4, and 6-puck configurations. Use a 3-puck for the lightest option or a 6-puck for the smoothest engagement. The 4-puck kit is a good compromise for both. Street-drivable in 6-puck configuration, but not street friendly due to the rigid hub. Additional features of SPEC Stage 4 clutch kits: * High-clamp pressure plate * Carbon-graphite friction material * High-torque solid hub and disc assembly * Bearing and tool kit included * Great for road racing, rally, drag racing, drifting, and pulling

3.33 out of 5 stars ( 3 )

$584.99

12 Results Found For "rally wheels"