Availability
Showing In Stock Items. Show All 32 Items.
Holley dual tank fuel pump kits will allow you to pick up additional fuel in the tank. They include an in-tank fuel pump, relay, wiring harness, and fuel filter. The fuel pump kits are available for 1, 2, and 4-barrel Pro-Jection systems.
( 3 )
$549.95
—
$632.95
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$502.89
—
$603.67
Aeromotive VaporWorx BoostWorx returnless PWM kits for ZL1 fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with the popular and affordable GM Gen5 ZL1 Camaro, C7 Corvette, Aeromotive Super ZL1, and many other GM-compatible fuel pump modules, these systems will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. BoostWorx ZL1 controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
( 1 )
$525.15
—
$577.15
Aeromotive VaporWorx BoostWorx returnless PWM kits for CTS-V fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with GM CTS-V2 and compatible fuel pump modules, this system will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating just like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. BoostWorx CTS-V controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
Not Yet Reviewed
$577.15
Aeromotive VaporWorx BoostWorx returnless PWM kits for Ford GT500 have everything needed to provide a standalone, manifold referenced, OE-type returnless fuel system. When used with the low-cost Ford/Motorcraft PFS1314 fuel module, the systems will provide a 42 to 60 psi base pressure with a 1:1 manifold referenced fuel pressure change for up to 25 psi of boost--just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. The system's key to simplicity is the standalone manifold pressure sensor that tells the BoostWorx controller how to adjust the fuel pressure. Simply connect the hose from the pressure sensor mount to the intake manifold, set the fuel pressure according to the need, and you're done. The controllers can also be used with any engine that needs to have a separate MAP sensor for manifold referenced fuel pressure. BoostWorx GT500 controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability when combined with the OEM-style fuel module * A minimum 50 percent reduction in power to the fuel pump during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
Not Yet Reviewed
$577.15
Aeromotive VaporWorx Ally Returnless PWM (Pulse Width Modulation) electronics kits for the KPM1500 fuel pump include the necessary parts to modify the KPM1500 (not included) to make it work properly for FSCM (fuel system control module)-equipped vehicles and aftermarket ECM/FSCM systems. The weakness of the OEM FSCM is power capability--they can drive one high-power pump, but not two. That's where VaporWorx Ally PWM kits come in. They provide the components needed to drive the second (KPM1500) fuel pump electrically while the FSCM handles the primary. Using pulse width modulation to slow down the pumps is very effective in keeping fuel temperatures down and relieving the electrical system of excessive load. Ally controllers help reduce the amount of power that the FSCM has at higher fuel demand, so at higher duty cycles the VaporWorx controller will start to out-run the FSCM and take more of the pumping power load. These Aeromotive VaporWorx kits are intended to be used as an Ally, or piggyback, system to help the OEM FSCM. No additional relays, Hobb's switches, etc. are needed.
Not Yet Reviewed
$577.15
Aeromotive VaporWorx BoostWorx returnless PWM kits for Ford GT have everything needed to provide a standalone, manifold referenced, OE-type returnless fuel system. When used with the low-cost Ford/Motorcraft PFS1215 fuel module, the systems will provide a 42 to 60 psi base pressure with a 1:1 manifold referenced fuel pressure change for up to 25 psi of boost--just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. The system's key to simplicity is the standalone manifold pressure sensor that tells the BoostWorx controller how to adjust the fuel pressure. Simply connect the hose from the pressure sensor mount to the intake manifold, set the fuel pressure according to the need, and you're done. The controllers can also be used with any engine that needs to have a separate MAP sensor for manifold referenced fuel pressure, and they can be used in constant pressure mode by removing the vacuum line or MAP sensor wiring, and the controller will provide a constant pressure. BoostWorx GT controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability when combined with the OEM-style fuel module * A minimum 50 percent reduction in power to the fuel pump during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
Not Yet Reviewed
$577.15
On Sale
Summit Racing™ carburetor and fuel pump Pro Packs have taken the most popular combinations of square bore carburetors, fuel pumps, and fuel pressure regulators (plus relay kits for most of the electric fuel pump kits) and put them together with one part number to save you time and money.
( 1 )
$803.89
$635.93
—
$743.89
These Russell complete EFI fuel system kits are all-in-one fuel solutions for your vehicle. They are designed for GM LS-series and Dodge 5.7L Hemi engine swaps into older non-EFI vehicles. The kits include an Edelbrock inline street/strip electric fuel pump, a regulator/fuel filter assembly, a fuel pump relay and wiring harness, and 15 ft. of Russel ProFlex hose, plus an assortment of hose ends and adapters to complete the installation. The Russell complete EFI universal fuel system kits can support up to 600 hp at 40 psi.
Not Yet Reviewed
$594.95
—
$642.95
Aeromotive VaporWorx BoostWorx returnless PWM controllers for dual fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM dual-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pump
Not Yet Reviewed
$683.25
Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition
( 1 )
$502.90
—
$630.20
Aeromotive VaporWorx BoostWorx PWM controllers for CTS-V LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the CTS-V fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM CTS-V LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 750 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition
Not Yet Reviewed
$502.90
Aeromotive VaporWorx BoostWorx PWM controllers for ZL1 LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the Gen5/6 Camaro ZL1 fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM ZL1 LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 650 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition
Not Yet Reviewed
$502.90
Aeromotive VaporWorx ReturnX return-type 3 to 4-pump PWM controllers have everything needed to provide a standalone fuel pump speed control system for up to four high-powered brushed pumps. ReturnX has primary and secondary PWM controller output. Under normal idle/cruise driving, the #1 and #2 pumps are on the primary side and running fast enough to provide sufficient fuel pressure. The #3 and #4 pumps are attached to the PWM secondary output, but follow at a much lower duty cycle than the primary side. As the primary side increases in output power, so does the secondary side in a leader-follower arrangement that delivers a smooth ramp-up in pump speed. Key features: * For forced induction systems only * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent during idle and cruise * Standalone MAP sensor for pump speed control -- 2.5bar LSA/LS9 type -- Adequate range for supercharged applications * All pumps are under PWM control * Plumb fuel system using traditional regulators, filters, and return lines * Developed for in-cell use where the primary output feeds a lift and pressure pump, and the secondary output controller the third and fourth. Benefits: * Everything needed electrically to drive three or four fuel pumps * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 110-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 18 V operating capacity -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition * Easy to set idle/cruise primary pump speed adjustments * #3/#4 pumps ramp in automatically, no adjustments needed * Uses standard return-type plumbing systems, and can be used to replace currently installed Hobb's pressure switch + relay applications
( 1 )
$816.95
Aeromotive VaporWorx BoostWorx returnless PWM controllers for triple fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM triple-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Must be used in manifold referenced fuel pressure mode * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pumps
Not Yet Reviewed
$683.25
Aeromotive VaporWorx BoostWorx PWM controllers for DualX ZL1 universal applications simplify installation and increase overall fuel system performance for dual OEM ZL1 fuel module applications. DualX uses a progressive ramping strategy with connections on the controller for the primary (pump 1) and follower (pump 2). The follower pump runs at lower duty cycle than the primary, allowing the follower pump to be on at all times, but at a lower average power, and allowing the pumps in the follower module to continually fill the reservoir with fuel, so it is ready to feed the engine under the most challenging conditions. As the primary pump increases in duty cycle, so does the follower, and once the primary is at 100 percent, the follower continues to increase to 100 percent duty cycle, as needed. This strategy is automatic and requires no user programming or adjustments. BoostWorx PWM DualX ZL1 fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, Hobb's switches, or filters needed -- OEM fuel level sensor can be used if desired * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * Can be used in constant or manifold referenced fuel pressure modes -- Manifold referenced suggested to further reduce electrical demand
Not Yet Reviewed
$630.20
Aeromotive VaporWorx ReturnX return-type triple-pump PWM controllers have everything needed to provide a standalone fuel pump speed control system for three high-powered brushed pumps. Offering primary and secondary PWM controller output, the primary provides sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. As the primary side increases in output power, so does the secondary side in a leader-follower arrangement that delivers a smooth ramp-up in pump speed. Key features: * For forced induction systems only * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent during idle and cruise * Standalone MAP sensor for pump speed control -- 2.5bar LSA/LS9 type -- Adequate range for supercharged applications * All pumps are under PWM control * Plumb fuel system using traditional regulators, filters, and return lines * Developed for in-cell use where the primary output feeds a lift and pressure pump, and the secondary output controller feeds the third pump Benefits: * Everything needed electrically to drive three brushed fuel pumps * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 110-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 18 V operating capacity -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition * Easy to set idle/cruise primary pump speed adjustments * Uses standard return-type plumbing systems, and can be used to replace currently installed Hobb's pressure switch + relay applications
Not Yet Reviewed
$683.25
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
American Autowire Highway 22 Plus wiring harness kits are pre-engineered for power! Developed to handle your most demanding power requirements, these Highway 22 Plus wiring harnesses packs the punch of a high-powered OEM system into a smaller, easy-to-install, and extremely compact front loading package. Plus, they pack the mounting flexibility for creative and custom electrical systems! Perfect for your street rod, custom, or kit car, American Autowire components used in this panel have extreme power handling capabilities with an easy clamp-style system to make adding and removing wires easy--no terminals, no crimping, and no screws! When you're down to the wire, the choice is easy--American Autowire! Highway 22 Plus kits feature: * Modular fuse panel for added flexibility in mounting * 175 amp Mega-Fuse protection * Self-locking, screw-down, vibration-proof connections * 40 amp fan or fuel pump relay * Headlight, dimmer, and ignition switches * Extra-long wire lengths for custom wire routing * Full-color schematics and instructions The full list of the Plus features are below *Each kit will now include a built-in LED flasher to support LED turn signals without the need to purchase an additional item. *We've added back up light feed and power wires to make the harness easier to install in a more modern vehicle. *The pre-installed 20 amp relay can now be easily changed to function as either a keyed 12 volt or ground triggered item. *We've improved our instructions to cite a wider range of examples and real-world scenarios. The panel labeling has also been updated along with the above physical changes, including wording modifications for enhanced clarity. *The wiper circuit has been upgraded to a 20 amp fuse to support all aftermarket wiper systems. This has been made an accessory circuit for more adaptability. *The AC/Heat fuse has also been moved to an accessory circuit to eliminate draw from the blower motor while the vehicle is being started. *All kits will feature our new high amp alternator and main power connection kit. This allows for the use of high amp alternators, and provides an even better level of fuse protection for the panel and charging system. This new connection kit utilizes 6 gauge wire and two 175 amp Megafuses. *Extra connectors and wiring have been added to more easily support a 4-headlight system without an additional add-on purchase. *Longer neutral safety wires for cars with console shifters.
( 9 )
$676.40
FAST has taken the next step in making EFI easier with these fuel system kits. They cover all street performance applications and most bracket and super class drag racing categories. FAST fuel system kits are perfect for those switching from carburetor to EFI, building new EFI engines, or simply upgrading their current fuel system. In one part number, they include everything you need to supply your state-of-the-art high performance fuel system. Best of all, the components used to create the FAST fuel system kits are made of aluminum and stainless steel to ensure years of long, trouble-free service. Kits include: * Fuel pump * Filter * Y-block(Depending on kit) * Fuel regulator * System fittings * Wiring harness
( 3 )
$515.95
—
$627.95
If you are looking for a switch panel and harness to keep your racecar streetable, Painless performance 21-circuit harness and switch panel combos are for you. They include an optional connector if you want to use a GM column mounted ignition switch. The included switch panels are a roll bar/dash mount 8-switch rocker panel, prewired, and a direct plug-and-play into the harnesses. These kits come with a Painless mounting plate, grommets, terminal assortment kit, and the necessary connectors for your turn signal switch, headlights, and alternator. Each harness is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 * Accessory #2 * Brake lights * Charging * Dome light * Electric fuel pump #1 * Electric fuel pump #2 * Electric water pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Park lights * Radio and gauges * Starting * Taillights * Third brake light * Turn signals * Wipers
( 4 )
$559.99
Painless Performance 10-circuit race only switch and harness kits feature a relay for each fused circuit and 6 switch contour rocker panel to control it. Each wire is pneumatically terminated and pre-inserted into the fuse block and relay blocks. The fuse blocks are labeled for each circuit and are painted black and silkscreened for easy identification of switch functions. The panels can be roll bar or dash mounted. The harness wires are oversized and custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 * Accessory #2 * Electric fuel pump #1 * Electric fuel pump #2 * Fan relay activation power * Fused power source * Headlights * Ignition coil * Starting * Taillights
( 2 )
$529.99
Painless Performance 21-circuit 1967-77 direct-fit Ford F-Series harnesses are the perfect upgrade for your Ford truck. They use many of the factory connections and are already pre-terminated. Each harness features a unique covered micro-fuse block with a 20 amp auxiliary relay circuit for accessories, such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Accessory/cigarette lighter * Backup lights * Brake lights * Cargo Lamp * Charging * Dome light * Electric choke * Emergency flashers * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Turn signals * Wipers and washer pump
( 9 )
$774.99
Nothing could make re-wiring your Chevy/GMC truck any easier than Painless Performance harnesses. By adding a factory-style bulkhead connector and additional GM connectors, Painless made their universal harness a custom fit for these popular 2x4 and 4x4 GMC/Chevy pickups. These harnesses will work on pickups, Blazers and Suburbans. Includes circuits for: * Air conditioning * Heat * Camper cover lights * Cigarette lighter * Four wheel drive switch * Backup lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn (relay) * Ignition coil * Instrument panel lighting and gauges * Park lights * Power antenna * Power door locks * Power windows * Radio/clock (constant and switched) * Starting * Taillights * Third brake lights * Turn signals * Wipers and washer pump
( 43 )
$635.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
