Availability
PRW Dodge Cummins rocker arm systems are the perfect upgrade to provide more power and run your diesel engine more efficiently. Each rocker is made from alloy steel substantially stronger than stock. PRW Cummins shaft systems are manufactured to exceed OEM specifications as a "drop in" assembly using the stock arm ratios. The upgraded rocker arm systems are complete with everything you need, from ball adjusters and fasteners, along with silicon bronze bushings instead of OEM-style needled bearings for prolonged life expectancy. Note: some applications are pre-machined for high performance cylinder head stud kits.
( 1 )
$542.77
—
$679.93
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 404 )
$825.95
$742.95
On Sale
USA Standard manual transmission bearing kits include top-quality components to rebuild the bearings in your transmission. They're great for replacing worn out or broken items--even just giving your transmission a quick update, while you're down in the off-season.
( 9 )
$605.99
—
$674.99
$515.09
—
$573.74
On Sale
Wiseco crankshaft kits contain everything you need to complete your rebuild for a job done right, the first time! These crankshafts, connecting rods, bearings, and bottom end gaskets meet or exceed OEM specifications for the maximum horsepower and torque that every rider wants. Features include: * Double forged connecting rods feature shot peening, oil slots, and coated bronze thrust washers * Bottom end gasket kits are made from premium materials, exceeding OEM standards for an exceptional seal between critical mating surfaces * High-quality main bearings provide maximum life and smooth operation at high rpm * Surface treatment prevents corrosion and pitting, while adding strength to the assembly * Bushed top end of rod retains oil and eliminates pin galling * Case-hardened bottom end rod bores optimize bearing running surface * Hot rolled steel, case-hardened crank pin bearings * Caged needle roller bearings provide the highest possible rpm
( 2 )
$670.97
$505.79
—
$619.99
On Sale
Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia
( 4 )
$659.95
—
$851.70
$593.96
—
$766.53
On Sale
BTR connecting rods are state-of-the-art 4340 H-beam rods for your build. They feature heat-treated, stress relieved, and shot peened bodies with bronze bushed pin bores, and the cap and rod are serialized at the parting line to ensure proper mating after disassembly. BTR inspects them for bearing housing and pin bore diameter, bend/twist, and C/L length. Additional features and benefits: * They are pre-torqued with high-pressure lube and ARP 2000 bolts * Sets of 8 are matched within 2 grams overall * The rods weigh in at approximately 665 grams * Laser marked on the beam with the BTR logo * Rods are individually bagged and sealed
( 2 )
$759.99
$683.99
Strange lightweight door car drag racing steering racks are manufactured using only heat-treated, high-strength hardened steel and aircraft grade billet aluminum, resulting in a silky-smooth turning radius and almost zero backlash. Available with either 19 1/2 in. or 24 1/2 in. tie rod centers, they feature hardened 4140 chromoly pinions that ride on a system of ball-bearings, delivering a seamless feel in the driver's hand with the confidence of durability and longevity. The steering box housing is CNC-machined from 6061 T-6511 billet aluminum for lightweight with extreme strength. Everything that goes into Strange door car steering racks--from the self-lubricating bronze bushings that allow the unit to move and flex smoothly to the dual lip pinion seal and heavy-duty, nylon reinforced neoprene boots that keep debris and moisture at bay--is top quality. Not only are the manufacturing specs very tight, but assembly tolerances are exceptionally close. Select the rack needed for your drag racer.
( 1 )
$720.99
Tilton 800-Series floor mount pedal assemblies merge both the performance of their 900-Series technology and the renowned value of Tilton's 600-Series pedal assemblies. These floor mount pedal assembly units feature a high-efficiency spherical bearing type balance bar and pivot-mount master cylinder design. 800-Series floor mount pedal assemblies feature: * Forged aluminum pedals are engineered for high-rigidity and low-weight * Adjustable pedal ratios (5.29:1 – 5.75:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size * Foot pads can be adjusted vertically, horizontally, and in angle to suit individual driver preferences * Large diameter 7/16 in.-20 balance bar provides maximum rigidity; PTFE-coated aluminum clevises for increased durability and reduced friction * Pedal pivots feature wave washers to reduce lateral pedal movement; and oil-impregnated bronze bushings decrease stiction * Lightweight aluminum frame features guide "ramps" to reduce balance bar tipping—decreasing friction and improving brake repeatability
Not Yet Reviewed
$722.50
S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$550.76
—
$587.66
FAST XDi Race Cam Sync distributors are an easy solution for those looking to provide an accurate cam sync signal to their aftermarket fuel injection system. Designed for applications that typically use a crank trigger, these distributors enable proper functioning of sequential fuel injection, individual cylinder spark timing, and fuel injector phasing—a must for maximum power and efficiency. Testing has shown the Hall-effect style optical pickup maintains a steady plus/minus 1/2 degree trigger signal, unlike competitors' inductive-style pickups prone to signal drift at high rpm. Ideal for drag racing, high-end street, and marine applications, FAST XDi Race Cam Sync distributors are constructed with a billet housing, precision-ground stainless shaft, and premium bearings. Hand-assembled parts also maintain consistent shaft end play, eliminating another source of triggering fluctuation. Each distributor comes with a precision-machined bronze gear and must be used with a crank trigger and external ignition box. These units are available for a variety of small and big block engine applications.
Not Yet Reviewed
$577.95
—
$662.95
Howards Cams Ultimate Duty forged billet connecting rods start with certified high-nickel 4340 aircraft-quality steel and are fully CNC-machined on the newest generation of equipment to ensure the removal of all surface imperfections. They are specially heat-treated using a multi-phase process to produce the ultimate in strength and reliability. Then these Ultimate Duty rods are fully stress-relieved and shot-peened to ensure that no stress risers remain. Howards Cams Ultimate Duty Forged billet connecting rods are profiled for long stroke applications and weight savings. The rod caps are double-ribbed for added strength and the rod cap alignment sleeves will keep the bearing caps precisely aligned. The rods are bronze bushed for floating pins and use 7/16 in. ARP 2000 cap screw fasteners to secure the caps.
Not Yet Reviewed
$807.99
On Sale
Fully assembled and bench-tested ARB on-board high performance air compressors install into your vehicle and include a full, snap-together, fuse-protected wiring loom with solenoid plug-in contacts, mounting hardware with reinforcing bracket, and an OEM-quality compressor isolating switch. With the addition of an ARB-171302 pump-up kit (sold separately), they can be used to activate ARB Air Lockers, and perform other functions such as inflating camping gear. So what makes these compressors special? They're small enough to fit into even the tightest space and quiet enough to mount in the cab. They have enough output to air up four 35 in. to 37 in. tires in a single duty cycle and typically air up a 35 in. tire in just over two minutes. And, they work. ARB has tested these units in ovens, freezers, underwater, and in the silty dust of the Simpson Desert and they continue to perform. Features of ARB on-board high performance air compressors include: * Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply * Fully sealed components for moisture and dust protection * Over-pressure safety valve-equipped * Pressure switch-controlled air manifold system specially designed for ARB Air Lockers * Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life * Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing * Motor is internally thermal-protected against extreme temperature damage * Comprehensive-photo illustrated installation guide * Range of accessories available
( 9 )
$669.75
—
$813.55
$602.78
—
$732.20
Tilton's 800-Series firewall-mount pedal assemblies merge the performance of 900-Series pedal assembly technology and the renowned value of 600-Series pedal assemblies. They feature high-efficiency spherical bearing type balance bar and pivot-mount master cylinder design. Product features: * High-efficiency balance bar and pivot-mount master cylinder design * Forged aluminum pedals are engineered for high rigidity and low weight * Adjustable pedal ratios (5.0:1 – 6.2:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size * Foot pads can be adjusted vertically, horizontally, and in angle to suit individual driver preferences * Large diameter 7/16 in.-20 balance bar provides maximum rigidity. PTFE-coated aluminum clevises for increased durability and reduced friction * Pedal pivots feature wave washers to reduce lateral pedal movement and oil-impregnated bronze bushings decrease stiction * Lightweight aluminum frame features guide "ramps" to reduce balance bar tipping, decreasing friction and improving brake repeatability
( 1 )
$565.25
WEHRS spring bars offer fine-tuned traction control and allow for precise adjustment of a car's spring setup. The spring bars can be used with a variety of springs and can be adapted for different applications, enabling users to build custom rate curves, with or without internal pucks. The spring bars design includes a clip-release mechanism for quick and easy removal of the spring cup, eliminating the need to unscrew the adjuster nut. The spring style pull bar comes standard with brake separate from pull side and also has a long bronze bushing to eliminate shaft flex under load. The jam-nut locking system and Torrington bearing on adjuster nut allows for precise and easy adjustment of the spring preload. In addition, the use of OD alignment cups (like the WM165BO and OD cups) helps to reduce or eliminate spring bow, especially when using softer springs.
Not Yet Reviewed
$505.99
Oliver GM Duramax connecting rods feature an I-beam design for ultimate in strength and durability. They are manufactured from 4340 aircraft quality steel and are fully stress relieved and shot peened to insure no stress risers remain. The beam is profiled for weight savings and the cap has been lightened for easier balancing. They are specially heat-treated using a multi-phase process to insure the ultimate in strength and reliability. Oliver GM Duramax connecting rods caps feature alignment dowels to keep bearing caps precisely aligned and they are bronze bushed for floating pins.
Not Yet Reviewed
$537.58
Are you looking to replace a broken or worn-out crankshaft? Hot Rods crankshafts are sold with or without Hot Rods connecting rods and wrist pin bearings. These crankshafts are factory assembled and trued to OEM specifications. They avoid the additional machine work and extra parts typically required for long-stroke engines. Stroker crankshafts use stock pistons. Heavy-duty crankshafts utilize their heavy-duty connecting rods. Bolt in and go with these Hot Rods crankshafts!
Not Yet Reviewed
$769.45
Clearance
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 83 )
$627.99
—
$779.99
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 240 )
$508.99
—
$748.99
On Sale
McLeod Racing offers several different clutch kit configurations based on your specific need and application. Their Adventure Series provides clutch solutions for the trail-ready, daily driven, and off-road market. McLeod Trail Extreme Packs are aimed towards serious truck and off-roaders with engine mods, increased vehicle weight, and larger tires from 37 in. and up. Ideal for those with a wilder adventure in mind, the kits include a Trail Extreme Pack ceramic/ceramic disc and Max Mass 45 lb. steel billet flywheel for improved drivability on the road and off. Designed and engineered for your next adventure, McLeod Adventure Series Trail Extreme Packs are your best choice for a street friendly yet trail proven clutch to hold big power or a lot of weight. Choose the kit designed for your Jeep. Also includes: * 11 in. diaphragm HD pressure plate * 11 in. self-aligning sprung hub disc * Billet internal hydraulic bearing that increases clutch travel and replaces the factory "problematic" plastic slave cylinder * ARP pressure plate bolts * Hydraulic lines * Block-off plate * Bleeder/line connector * Alignment tool
Not Yet Reviewed
$865.00
$778.50
On Sale
McLeod Racing offers several different clutch kit configurations based on your specific need and application. Their Adventure Series provides clutch solutions for the trail-ready, daily driven, and off-road market. McLeod Trail Pro Packs are aimed towards occasional off-roaders or dedicated trail enthusiasts with mild engine mods, increased vehicle weight, and larger tires. The kits include Trail Pro Pack organic/ceramic disc for smooth and even engagement with increased holding power over stock, and Max Mass 45 lb. steel billet flywheel for improved drivability on the road and off. McLeod Adventure Series Trail Pro Pack clutch kits are great choices to upgrade to a street friendly yet trail capable clutch. Choose the kit designed for your Jeep. Also includes: * 11 in. diaphragm HD pressure plate * 11 in. self-aligning sprung hub disc * Billet internal hydraulic bearing that increases clutch travel and replaces the factory "problematic" plastic slave cylinder * ARP pressure plate bolts * Hydraulic lines (where applicable) * Block-off plate (where applicable) * Bleeder/line connector (where applicable) * Alignment tool
Not Yet Reviewed
$775.00
$697.50
On Sale
McLeod Racing offers several different clutch kit configurations based on your specific need and application. Their Adventure Series provides clutch solutions for the trail-ready, daily driven, and off-road market. McLeod Super Trail Pro Packs are aimed towards serious truck and off-roaders with engine mods, increased vehicle weight, and larger tires from 37 in. and up. Ideal for those with a wilder adventure in mind, the kits include a Super Trail Pro Pack organic/ceramic disc and Max Mass 45 lb. steel billet flywheel for improved drivability on the road and off. Designed and engineered for your next adventure, McLeod Adventure Series Super Trail Pro Pack clutch kits are your best choice for a street friendly yet trail proven clutch. Choose the kit designed for your Jeep. Also includes: * 11 in. diaphragm HD pressure plate * 11 in. self-aligning sprung hub disc * Billet internal hydraulic bearing that increases clutch travel and replaces the factory "problematic" plastic slave cylinder * ARP pressure plate bolts * Hydraulic lines * Block-off plate * Bleeder/line connector * Alignment tool
Not Yet Reviewed
$835.00
$751.50
Fox Racing Shox offers Float 3 Evol RC2 shocks for a variety of ATV applications. Super-lightweight and easily adjustable, these air shocks are further enhanced with the extra volume (EVOL) air chamber—which regulates spring rate in the final portion of the stroke and controls the bottom-out characteristics of the shocks. Forget about heavy springs; lighter is faster, and these shocks offer a huge range of adjustments, enabling you to set them up for any track or terrain. The custom-valved, adjustable dual rate air spring and externally adjustable rebound let you quickly and easily tune your suspension. Additional features: * EVOL air technology * High-flow velocity-sensitive damping * Chrome silicone negative spring * Samurai Sealing System (SSS) * Kashima Coat * Aerospace-grade PTFE-lined spherical bearings * Wide-range rebound adjustment * Anodized internal floating piston and bearing housing * 6061-T6 aluminum body, sleeves, and reservoirs * External rebound adjustment * High-flow compression adjuster * Fully rebuildable and serviceable
Not Yet Reviewed
$799.99
These Perfection ZVT Variable Torque Performance clutches put the power to the wheels when you need it most. These clutches add clamp load by applying centrifugal force to the pressure plate as engine rpm increases. Each ZVT clutch kit is designed with consideration to your vehicles peak torque and horsepower range. Includes pressure plate, disc, throw out bearing, and installation tool.
( 1 )
$573.99
On Sale
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$556.95
—
$560.99
$501.26
—
$504.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
