Availability
Showing In Stock Items. Show All 27 Items.
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$833.95
—
$888.95
COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.
( 3 )
$731.95
—
$883.95
Howards Cams Track Smart connecting rods are designed to provide the ultimate in strength and durability. They start with certified 4340 aircraft-quality steel and are fully CNC-machined on the newest generation of equipment to ensure the removal of all surface imperfections. They are fully stress-relieved and shot-peened to ensure that no stress risers remain and specially heat-treated using a multi-phase process. Howards Cams Track Smart connecting rods are bronze bushed for floating pins, while ARP cap screw fasteners secure the caps. Choose the rod sizes needed for your engine.
( 1 )
$659.99
—
$689.99
Howards Cams Ultimate Duty forged billet connecting rods start with certified high-nickel 4340 aircraft-quality steel and are fully CNC-machined on the newest generation of equipment to ensure the removal of all surface imperfections. They are specially heat-treated using a multi-phase process to produce the ultimate in strength and reliability. Then these Ultimate Duty rods are fully stress-relieved and shot-peened to ensure that no stress risers remain. Howards Cams Ultimate Duty Forged billet connecting rods are profiled for long stroke applications and weight savings. The rod caps are double-ribbed for added strength and the rod cap alignment sleeves will keep the bearing caps precisely aligned. The rods are bronze bushed for floating pins and use 7/16 in. ARP 2000 cap screw fasteners to secure the caps.
Not Yet Reviewed
$807.99
PRW Platinum Series shaft-mount rocker arm systems fulfill the needs of successful racers and performance engine builders at every level. The Performance Quotient PQx rocker arms are made from quality alloy extrusions. These systems include CNC-machined billet steel pedestals, and ground, steel alloy rocker shafts—along with PRW SCM-4135 alloy steel fasteners, studs, and bolts. PRW Platinum Series shaft-mount rocker complete kits include all the components and hardware required for a professional installation. Order the system recommended for your specific vehicle and engine size. Features, items, and specs: * Several systems to suit many cam profiles * 8 pairs of shaft-mount rockers with adjustable cup-style valve lash adjusters * SAE 42100 full complement precision needle and cage roller bearings * Rated up to 750 lbs. open spring pressure * Internal oiling system for long-lasting performance
( 10 )
$742.38
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 83 )
$586.99
—
$836.99
Summit Racing™ Pro LS forged H-beam connecting rods deliver industry-leading fit, finish, and durability at an affordable price. They're available in different size options, individually or in a set of 8. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Designed for up to 5,000 ft. per minute avg. piston speed in Street and Drag applications * ARP 2000 rod bolts with 200,000 psi tensile strength * Dual ribbing on rod cap for maximum strength * Stroker clearanced--minor cylinder notching may be required * Accommodates most camshafts with 4.250 stroke * Bores finished to +/- .0001 in. * Balanced to within +/- 1 gram per end * Full-floating with precision-honed bronze bushing * Small-end supports the wrist pin with minimal side clearance for maximum shear strength * Each rod is magnetic particle tested to ensure flawlessness * Shot-peened finish to remove potential for stress risers
( 19 )
$699.99
BDS Suspension heavy-duty radius arms upgrade the weak factory stamped steel versions on your vehicle. They add strength, functionality, and styling, plus correct the suspension geometry when used with lifted applications. Built from heavy wall tubing, these arms are gusseted and fully welded for superior strength, along with larger OE-style rubber bushings to isolate NHVs with zero maintenance needed. The design offers additional tire clearance along with more ground clearance over drop brackets. BDS radius arms are finished in a durable textured black powdercoat and most have lower cam slots for easy caster adjustment.
Not Yet Reviewed
$602.95
—
$614.95
On Sale
MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.
( 92 )
$579.95
—
$632.95
$520.95
—
$568.95
Sierra Marine Delco EST distributors are designed as direct replacements for late model GM EST (Electronic Spark Timing) distributors. They feature an aluminum housing and meet or exceed SAE J1171 standards. A steel gear is included which is compatible with a flat tappet or hydraulic roller cam. Their ball bearing and bushing combination provide maximum timing stability and long-life.
( 2 )
$595.99
Action Clutch single disc clutch kits contain a range of street to high performance clutch systems built using American materials which are all locally sourced as it has been done for 60 years. Action Clutch staged kits come complete with the clutch disc, pressure plate, throwout/release bearing, pilot bearing/bushing (when applicable), and alignment tool. Action Clutch Stage 2 clutch kits for street and occasional track use offer a 110 percent increased holding capacity. They utilize reinforced steel-backed full face Kevlar® friction material and feature a single diaphragm heavy-duty pressure plate, while maintaining an OEM-like pedal feel, super smooth engagement, and heat dissipation. These kits are engineered for vehicles that have basic bolt-on cars or NA vehicles with headwork, such as cams, very low boost or nitrous setup. These fibers have a low static to dynamic friction coefficient, making them an ideal choice for applications where smooth engagement is essential (e.g. daily driving, stop-and-go, off-road driving). Due to the properties of Kevlar®, the stage 2 kits have an exceptional lifespan with minimal increase in pedal feel and a more confidence inspiring engagement. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American grade rivets * Full enclosed spring retainers * Sprung hub for easy engagement
Not Yet Reviewed
$509.96
—
$610.09
Manufactured in Italy, Vertex pistons, both cast and forged, are the premier choice and highest quality aftermarket replacement and performance pistons for dirt bikes, ATVs, and UTVs. Vertex also leads the way in manufacturing high performance gaskets for dirt bikes, ATV, UTV, snowmobiles, and PWCs. Conveniently, Vertex offers a huge number of complete engine rebuild kits, each of which will save you time and money over trying to match up the correct components and buying them separately. Oversized pistons are available in some kits. Choose a kit designed for your powersports vehicle. Kits include: * Crankshaft * Piston kit * Complete engine gasket kit * Oil seal kit * Main bearing and seal kit * Water pump rebuild kit * Transmission bearing kit * Countershaft bushing/seal kit * Camshaft chain where applicable * Counter balancer bearing kit where applicable * Wrist pin bearing where applicable
( 1 )
$517.61
—
$798.11
Allstar Performance aluminum gear drives offer accurate valve timing. Designed for your small block Chevrolet V8, these gear drives feature a plate with built-in idler gears that fit under most 2-piece timing covers. They include a steel billet crankshaft and cam gears, needle bearing sets for the front and rear of the cam gear, four camshaft dowel pins, and five camshaft gear offset bushings for precise timing adjustments. Install aluminum gear drives from Allstar for precision timing.
Not Yet Reviewed
$649.99
Rollmaster Red Series timing sets are lightweight and stronger than any other timing sets available, due to the weight savings of billet steel and use of CNC machinery. All sets feature billet steel crank and camshaft sprockets that have been 100 percent CNC-machined for reduced wear and improved accuracy. Rollmaster Red Series timing sets come standard with a premium grade one-piece Iwis full roller chain, produced in Germany and built to the highest possible quality standards. The sets have nine keyways, allowing you more adjustments for dialing in the camshaft to your liking. Multiple keyways are a solid fixture and tend not to move or work loose like offset bushings or dowels--providing a positive locking of the cam timing to whatever position is desired.
( 13 )
$610.85
ReadyLift Suspension tubular radius arm upgrade kits are designed to correct the suspension geometry on lifted models. These new radius arms are heavy-duty and built to handle the use and abuse demanded out of Super Duty trucks. The arms are formed inward, allowing for additional clearance and providing even more space for oversized tires. The direct bolt-on design promotes quick and easy installation. The arms are available for a variety of late-model trucks. Additional details: * Heavy-duty tubular construction * Machined from steel with a black powdercoat finish * Designed to correct suspension geometry on 3.5 in. to 6 in. lifted models * Helps to correct the caster angle * Allows for larger tires to be installed * Ease of installation with direct bolt-on design * Oversized rubber bushings to better isolate road noise and vibration harshness * Notes: Will not work on Super Duty's with height sensors Includes: * Radius arm, left, assembled * Radius Arm, right, assembled * Cam bolt kit
Not Yet Reviewed
$789.95
—
$839.95
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 135 )
$526.99
—
$644.99
Eagle now offers their CRS lightweight H-beam connecting rods in their Featherweight series. The lighter design provides less rotating mass for flawless high-rpm performance. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides superb strength at a fraction of the weight of most other rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and shot-peened to stress-relieve the metal. The rods have a stout cap screw attachment with precision cap alignment sleeves to positively locate each rod cap. They come with 220,000 psi rated ARP 2000 cap screw rod bolts, instructions, and rod bolt lubrication.
( 3 )
$847.99
When an independent front suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding these Old Man Emu control arms brings the alignment cams back into an acceptable range for both caster and camber. Each control arm is carefully constructed to meet all VSB14 requirements. The ball joint housings and eyelets are made from forged steel for added strength. The ball joints are greasable and include protective caps to endure rough conditions, while also holding up long-term. All of this is coated in a durable black powdercoat finish that looks great and protects the control arms. Order the pair recommended for your vehicle application.
( 2 )
$649.95
—
$679.95
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 231 )
$525.00
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 328 )
$699.95
$628.95
—
$749.95
On Sale
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 115 )
$525.95
Davis United Ignition Ford Street/Strip D.U.I. distributors are performance replacements for your daily driver, street rod, or off-road vehicle. Rated at up to 7,000 rpm, these simple all-in-one ignition systems have the coil inside the cap and the module inside of the distributor; drop them in, run one 12 V wire, and you're off with 50,000 V of pure spark energy! The high-voltage coil allows for wider spark plug gaps, while the increased dwell in the D.U.I. Dyna-Module produces a hotter spark to deliver the most complete burn of your fuel mixture. Street/Strip D.U.I. distributors are tuned for several Ford motor applications, creating a super-smooth advance curve and eliminating engine damage. They're built tough with oil-impregnated upper and lower bronze bushings for shaft stability, accurate trigger signals, and years of trouble-free service. D.U.I. caps are offered in red, yellow, black, blue, and clear—so you can watch the sparks fly! Give your ride more power, crisper throttle response, and more low-end torque with a Ford Street/Strip D.U.I. (Davis Unified Ignition) distributor from Performance Distributors.
( 78 )
$509.00
On Sale
These Mallory Unilite distributors give you accurate, maintenance-free ignition timing. Instead of old-fashioned points systems, they have photo-optic, LED-triggering systems that never vary or wear out. You get increased rpm potential, improved combustion, longer spark plug life, and better cold-weather starting. Hooking one up is a simple 3-wire connection, and they come with your choice of adjustable mechanical and/or vacuum advance, self-lubricating bushings, and a Super-Duty cap and rotor.
( 56 )
$599.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
