Availability
On Sale
Holley Terminator EFI fuel system plumbing kits provide everything needed for a complete supply fuel system for the Terminator EFI self-tuning engine management system. They are engineered using Holley electric fuel pumps, fuel pressure regulators, and fuel filters, coupled with quality Earl's hose, to provide a fuel system tailored to the needs of your Terminator EFI system. The systems are available with different fuel pumps and types of fuel hose, so you can choose what best fits your application. All Holley Terminator EFI fuel system plumbing kits feature quality Earl's anodized aluminum fittings to get the job done and look good, too.
( 10 )
$725.95
$652.95
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
$673.95
On Sale
Aeromotive dual-action adjustable fuel logs incorporate new features previously unavailable. Each carburetor inlet uses a ball and socket assembly that swivels 20 degrees, allowing additional clearance for throttle stops, throttle linkage, and other accessories. They offer a healthy inlet that can feed high-horsepower engines and feature manufacturing from quality materials and a strong finish, providing durability and great looks. They also provide dual NPT ports (machined in) that allow you to install fuel pressure gauges or pressure transducers. Set a new standard for your ride with the Aeromotive dual-action adjustable fuel logs quality-engineered to fit!
( 4 )
$847.70
—
$881.65
$762.93
—
$793.48
On Sale
Aeromotive PTFE stainless braided fuel lines are ideal for street and racing applications where E85, gasoline, or methanol compatible fuel hose is needed. The stainless outer braid provides impact and abrasion resistance to protect the PTFE inner liner. These liners are specially carbonized for conductivity, which is critical for fuel handling. The fuel lines provide outstanding flow capacity; they're smaller on the O.D. for the same I.D. of a comparable rubber braided line for easier routing in tight spaces. The lines deliver extended service life in any fuel, as they will not harden, micro-fracture, or permeate fuel vapor (vapor-walk) like normal rubber braided line—minimizing fuel smell in the vehicle storage area. Choose the length and AN diameter needed for your application.
( 9 )
$604.75
$544.28
On Sale
Fluidyne fluid coolers are at their best when the heat is on. They set the standard in performance, reliability, and durability—but what else would you expect from one of only two companies authorized by NASCAR to supply their "Spec Rad"? The coolers are available in a variety of sizes and configurations for universal, direct fit, and specialty applications. Depending on model, features include: * Most are available in single-pass or double-pass configurations * CAB-brazed construction (no epoxy) * Extruded oval tubes and patented lanced offset flow turbulators * Most efficient coolers pound-for-pound on the market
( 5 )
$730.00
$584.00
On Sale
The amazing HydraMat fuel pickups feature Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks, as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. The Holley HydraMat fuel pickups are the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. Holley HydraMats are available in various sizes and shapes to fit a wide variety of stock fuel tanks and/or race fuel cells. Features and benefits: * Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells * Greatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and/or engine stalling * Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions * Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells * Not for use with diesel fuels
( 64 )
$983.95
—
$1,049.95
$639.95
—
$682.95
On Sale
It's like feeling the road for the very first time! Your classic Mustang will be much more fun to drive with a power steering conversion from Scott Drake. The conversion boxes are remanufactured up-to-date integral power steering gearboxes that will provide a true modern power steering feel, feedback, and a sporty 16:1 ratio. They bolt directly to the factory mounting location and to fit the stock pitman arm without any interference or modification of the shock tower. Drake offers kits to convert manual to power steering and to upgrade factory power to modern power steering. Eliminate leaky control valves and sloppy steering; enjoy driving your classic with a Scott Drake integral power steering conversion kit.
Not Yet Reviewed
$1,299.95
$714.95
On Sale
A4 carbureted fuel pressure regulators from Aeromotive use a "soft-seat" design, eliminating pressure creep at idle and on the throttle stop. This exclusive design ensures precise pressure control, resulting in more consistent ETs.
( 1 )
$594.65
$535.18
On Sale
If your racecar, Corvette, or race Corvette requires a distributor with a mechanical tach drive, these Pro-Billet Tach Drive distributors from MSD are what you need. Their race-proven magnetic pickup delivers precise trigger signals to your MSD ignition every time one of the reluctor's precision paddles pass by. This reluctor assembly is connected to an oversized steel shaft for increased strength and endurance, and is responsible for triggering the magnetic pickup. Inside the stout billet 6061-T6 aluminum housing, a sealed ball bearing and long sintered bushing guide the 0.500 in. steel shaft for high-rpm accuracy. Just above the reluctor is an adjustable mechanical advance assembly that lets you tailor a timing curve to match your engine's needs. This assembly is TIG welded for strength, and features chromoly weights and nylon pads to ensure smooth advance as the rpm increases. Corvette models feature a vacuum advance, and are available with or without an adjustable slip collar for engines that have had the deck height modified or use exotic intake manifolds. The distributors also feature a Rynite base. The tach drive assembly has a grease fitting for lubrication, is compact to clear the firewall and linkage, and can be repositioned easily to fit different applications. These distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition.
( 10 )
$669.95
$601.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
—
$949.95
$522.95
—
$718.95
On Sale
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$749.95
$673.95
On Sale
Aeromotive 1988-97 Chevy Truck Dual 340 in-tank fuel pump modules are direct drop-in units for the specified years of GM 1500/2500 V8 trucks. Featuring dual 340 lph pumps, they can support up to 1,400 FWHP on gas/fuel injection/forced induction and up to 980 FWHP on E-85/fuel injection/forced induction. 100 micron pump pre-filters are included. Additional features: * No drilling required for installation * Individual wiring terminals for each pump to accommodate a staged system * Single -08 ORB outlet port for easy plumbing * Outlet, return, and vent ports include -08 90-degree swivel fittings * Vent port adapter fitting * 0-90 Ohm fuel level sender
( 1 )
$725.70
$653.13
On Sale
Protect your ride from overheating! Now you can maximize cooling efficiency with Frostbite's performance cooling aluminum radiators. They're engineered to cool more effectively and weigh less than the older OEM-style brass units, enhancing the overall performance of your engine. Frostbite radiators are available in a variety of application-specific fitments, each unit engineered with aircraft-quality aluminum cores, fittings, tanks with billet aluminum filler necks, and OEM-style brass petcocks. A proper cooling system starts with the right radiator—the Frostbite!
( 318 )
$570.95
—
$829.95
$503.95
—
$745.95
On Sale
The Titanium Signature Series diesel fuel system is engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting, and most reliable aftermarket filtration system in the diesel industry. Rated at up to 240 gallons per hour (depending on model), high pressures of 70 psi, and backed the FASS limited lifetime warranty, Titanium Signature Series lift pumps can support your Ford Powerstroke 6.7L diesel engine with enough fuel for 600-900 hp aggressive tuning and high performance fuel system upgrades. A Titanium Signature Series fuel system also offers advanced filtration benefits that will help protect your Powerstroke's injection systems, effectively extending the life of both your injection pump and injectors. These benefits include an improved filtration rating of 2 microns, a built-in water separation filter, and FASS Diesel Fuel Systems' patented air/vapor removal process. Aftermarket lift pumps are important for both drivers and high performance applications when looking to improve either fuel economy or increase horsepower/torque. Kits include a FASS bulkhead and suction tube kit. Machined from 6061 T-6 billet aluminum, the bulkhead fitting is designed to mount directly to the factory fuel tank module (sending unit) to allow the FASS to directly draw and return fuel to the fuel tank module, effectively eliminating all 1/4 tank and 1/8 tank issues when installed correctly. The pickup tube is fabricated from PTFE, which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to approximately 0 miles until empty. These are complete replacements for factory lift pumps and hold a pressure of 45 psi.
( 1 )
$649.00
—
$799.00
$584.10
—
$719.10
On Sale
Make Holley SBF Hi-Ram EFI intake manifold bases the foundation for your custom induction system. Their modular design allows them to accept a variety of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. Aggressive looks and bold styling make your bad intentions clear—whether you're drag racing, truck pulling, or making waves in your boat—when you start with the Holley Hi-Ram EFI intake manifold bases. SBF Hi-Ram EFI intake manifold base features and specs: * Manifold base only designed for 8.2 in. deck height * Cast aluminum construction * Available in natural cast aluminum (satin) or black powdercoat finish * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system
( 1 )
$996.95
—
$1,049.95
$648.95
—
$682.95
On Sale
Fluidyne high performance radiators feature aluminum end tanks and 100 percent NOCOLOK brazed aluminum cores, rather than the epoxy-bonded types used by others. These cores are built using high-efficiency cooling fins that deliver maximum performance and durability. The radiators are offered in universal sizes, as well as exact fit, with all brackets, fittings, and hoses set up to match the original equipment layout for easy installation—and they meet ISO 9001 standards for quality. Fluidyne radiators are available in crossflow and downflow styles, and a range of sizes for vehicle-specific applications; some models also include a transmission cooler. Keep your ride cool on the hottest days or at the track with a Fluidyne radiator.
( 31 )
$632.00
—
$953.00
$505.60
—
$762.40
On Sale
Heat is the enemy of most major systems in a performance vehicle, especially the engine, transmission, and differential. As one of the top performing coolers in the Baja 1000 and Baja 500, the Fluidyne Enduro All-Season fluid coolers are used by top tier racing teams to tame their engine oil and transmission fluid heat. They have an 11 in. electric fan mounted directly to them, enclosed in shrouding that ensures maximum airflow through the cooler core, to deliver maximum cooling. Because they're self-contained, these coolers do not have to be situated in direct airflow. So, you can mount them in just about any remote location to cool engine oil, transmission fluid, or differential lube. In addition to the normal inlet and outlet fittings, they have threaded bosses to accommodate temperature sending units for inlet temperature, outlet temperature, or both. They also add two quarts of fluid to whatever system they're protecting, which further helps cooling.
( 2 )
$643.00
—
$737.00
$514.40
—
$589.60
On Sale
Holley 450 lph fuel pump modules feature billet pump flanges that connect to either single or dual 450 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 450 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
( 2 )
$723.95
$650.95
On Sale
NOS Pro Race Fogger Professional kits have logged many hours of research and development at the race track. They're available with soft plume fogger or annular fogger nozzles. The kits also feature new distribution blocks and solenoids. The distribution blocks are manufactured from billet aluminum and are bright dip anodized in red and blue. They also use 3/16 in. compression fittings that are compatible with hard line or poly line. NOS Pro Race Fogger Professional kits include a new Pro Race nitrous solenoid, featuring a proprietary plunger material that resists swelling, and yet seals as well as Viton®-type material. The nitrous solenoids have a blue powdercoated housing and the Cheater fuel solenoid has a red powdercoat for easy identification. Achieve up to an additional 800 hp with select NOS Pro Race Fogger Professional kits.
( 3 )
$949.95
$522.95
On Sale
Holley 340 lph fuel pump modules feature billet pump flanges that connect to either single or dual 340 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 340 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
Not Yet Reviewed
$649.95
$583.95
On Sale
Aeromotive EFI OEM returnless rail Stealth fuel systems support the returnless fuel rails found in many early and late model cars and trucks. Includes: * Aeromotive's 3/8 in. quick-connect adapter for most OEM fuel rails * Port fittings (including fittings for Aeromotive Stealth and Phantom fuel pumps) * Aeromotive EFI regulator and fittings * -6 AN filter with 10 micron element * Aeromotive 0-100 psi equalizer liquid-filled fuel pressure gauge
( 1 )
$714.55
$643.10
On Sale
Create a smoke and light show on your street car or just intimidate your competitor with an Intimidator purge kit. The Intimidator kits use 5 bright blue LEDs to light up a plume of nitrous each time the purge button is pushed. Different color LEDs are also available separately for users who want a different look. Each kit comes with all necessary components for a simple installation, including: * NOS Super Powershot solenoid * Push-button switch * Relay * 12 in. steel tube * Fittings * Adapters * All necessary wiring
( 2 )
$699.95
$628.95
On Sale
Aeromotive EFI throttle body Stealth fuel systems have the parts and fittings to get fuel from the Stealth/Phantom pump up to the EFI unit. These kits feature a svelte X1 EFI regulator with larger -8 AN fittings and 1/3 less weight than the original, a 10 micron filter with -6 AN fittings, and a liquid-filled pressure gauge for accurate readings. Fuel lines are not included. Aeromotive EFI throttle body Stealth fuel systems will keep your new EFI purring.
Not Yet Reviewed
$658.30
$592.47
On Sale
If you're in the market for a water pump that can deliver powerful performance and unmatched reliability, look no further than Aeromotive's radiator mount electric water pumps. These radiator mount pumps can do just that—or they can be tank-mounted! Crafted from lightweight billet aluminum, these units boast a brushed electric motor that requires no additional electronic components to function. These pumps also feature an enlarged inlet port for maximum flow and an SAE-20 ORB inlet port that allows for multiple inlet fitting options. With the ability to flow 40 GPM at 2 psi at 13.5 V, these radiator mount electric water pumps from Aeromotive are a dependable and long-lasting option for any vehicle. Features and Benefits: * Designed to be mounted on a tank or radiator * Lightweight billet aluminum construction * Reliable brushed electric motor * No additional electronic components required * Flows 40 GPM at 2 psi at 13.5 V * Dependable, long-lasting mechanical seal * Enlarged inlet port for maximum flow * SAE-20 ORB inlet port allows multiple inlet fitting options * Includes weld-on mounting plate and hardware
Not Yet Reviewed
$568.65
$511.78
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
