Availability
Showing In Stock Items. Show All 73 Items.
BendPak rolling jack replacement power units deliver high-pressure hydraulic power to keep your lift performing at its highest level. These genuine BendPak power units are built to fit and function just like the originals they are replacing.
( 1 )
$600.00
—
$774.99
The Ranger E1.2B3F1 hydraulic power units are a compact tank that offers enough juice to lift a 10,000-lb. truck or SUV. The 1.5 hp motor is powerful enough to handle lifting applications on all of Ranger's low-rise lifts, as well as some of their full-sized lifts. Plus, the single-phase, 50/60 Hz design is super-efficient; when used on a low-rise car lift, your car will be lifted to the lift's max capacity in just 30 seconds. The crowning achievement of the E1.2B3F1's design is the fixed-volume hydraulic circuit with an optimized pressure-sensitive relief valve. When the system pressure exceeds 2,500 psi, the valve opens and allows fluid to bypass rapidly and safely. The valve automatically closes when the pressure levels return to normal. A hydraulic power unit with an optimized relief valve is essential for shops that need to operate heavy loads worry-free. Don't let the lighter tank on the Ranger E1.2B3F1 fool you into thinking this hydraulic power unit is weak. In fact, many prefer smaller tank sizes for one simple reason—they get the job done safely and very efficiently. Features and specifications: * Pumps feature high mechanical and volumetric efficiency, low noise level * End head prepared for lift-hold-lower applications using our standard manual lowering valve or solenoid cartridge valves * Totally enclosed motors are suitable for use in humid environments or dusty, contaminated atmospheres—UL Recognized and CSA Certified * AC electric motors feature heavy-gauge steel frame and base and high-quality ball bearings * Torque load remains constant throughout the range of operation * Power up, gravity down function * Heavy-duty start switches with a high IP-protection class and silver-plated contacts meet tough demands for a long service life * Cartridge-style relief valves meet tough demands for dependability and life expectancy * Equipped with black plastic and steel reservoirs * Vertical mounting * Equipped with oil level dipstick * High performance cartridge check valve is standard * Most premium grade petroleum-based fluids can be used—optimum operating viscosity range is 15-68 centistokes * Minimum recommended temp is -25 degrees C (-1 degrees F) * Maximum recommended temp is +80 degrees C (+175 degrees F)
Not Yet Reviewed
$525.00
Mr. Heater ventilation kits are designed to fit specified heaters. These kits make venting to code possible. The kits include the necessary components for garage heaters requiring direct venting of combustion byproducts. They are available in vertical mount, made from galvanized steel or horizontal mount, made from stainless steel. Giving you the choice for sidewall or roof venting.
Not Yet Reviewed
$579.99
Summit Bucks
Summit Racing™ hydraulic wheel dollies feature a rugged steel chassis with a durable powdercoat finish and nylon casters made to easily roll over uneven surfaces. The units' sturdy composite rollers cradle vehicle tires up to 12 in. wide. These hands-free, pedal-operated systems enable you to effortlessly lift up to 1,500 lbs. (per dolly) while keeping your hands available for other tasks. If you're tired of wasting time moving vehicles with a jack and dolly, or you need to move a vehicle that is locked, blocked or stalled—these economical hydraulic wheel dollies by Summit Racing™ are the ideal solution.
( 42 )
$595.76
Pull an engine, lift a cab, move heavy shop equipment, load your truck—the possibilities are endless with this 2,200 lb. capacity Summit Racing™ gantry crane! The all-steel unit adjusts from 94 1/4 in. to 141 1/2 in. in height to adapt to different jobs, and spans 94 in. to accommodate the widest vehicles. It rolls smoothly on four rubber-coated 5 in. locking swivel casters, and disassembles quickly (without tools) for storage and transport. The I-beam measures 3 in. wide by 4 3/4 in. tall, and the crane base is 47 1/4 in. wide.
( 23 )
$729.99
Building or refurbishing an engine is one of the most exciting endeavors a hobbyist can undertake. What's the next step after the engine build is complete? Take it for a test run on one of our Summit Racing™ engine run stands! These heavy-duty engine stands allow for a place to bolt a motor, then fire it up and run it for break-in, tuning, and to find and fix any problems, like leaks, before doing the final motor installation. The engine run stands are made from sturdy steel with a powdercoat finish for lasting service. They include threaded mounting posts to adjust engine mounts for proper height, and feature four sturdy, easy-roll casters with wheel lock to keep the unit from moving about. Take a test run you can trust with a Summit Racing™ engine run stand!
( 57 )
$731.99
B-G Racing string line kits are the easiest and most accurate way to achieve 4-wheel alignment. The frames are fully adjustable to allow fitment to a variety of cars—and attach to the vehicle using the hooking feet, which are interchangeable with all of the tubes in the kit. The string bars have a number of pre-machined grooves for the strings to locate in, and a pair of extension bars, making the B-G string lines suitable to cars of different widths. These kits can be used in conjunction with HUB stands, B-G's Clubman race scales, and scale pad leveling trays to achieve the ultimate vehicle setup. Additional features and details include: * Front and rear multi-adjustable boss units manufactured from high-grade mild steel with a durable gray powdercoat finish * Hooking feet manufactured from high-grade mild steel with a polyurethane coating * Tubes (silver zinc plated) in various lengths * Machined aluminum string bars with anodize coating * Plastic string line reels
( 13 )
$569.00
Convenience and quality come together in the design of B-G Racing's sturdy wheel and tire trolleys. Equally practical for transport in the pit and paddock, the trolleys are also great for storage back at the workshop. These shop carts are manufactured from high-grade mild steel with a durable gray powdercoat finish; and demountable tire-friendly round crossbeams reduce marking of tires. The units are available in 1300mm, 1500mm, or 1600mm internal lengths. The height of the top beams can be adjusted in three positions, depending on the diameter of the tires, and to reduce the overall trolley height. B-G trolleys also feature two fixed and two fully-rotating, locking and braking castor wheels, designed for strength and ease of movement around the pits, the paddock, workshop, and garage.
( 1 )
$770.27
Woodward Fab bead roller motor kits convert your manual bead roller to a power bead roller. They feature an extra-powerful 1/2 hp motor to help prevent stalling out on larger or wider beading operations—and include a forward and reverse switch. An industrial metal foot pedal allows you to vary the spindle speed at the pedal, instead of reaching around to adjust a control. These motors easily bolt onto the Super Bead Roller or the Woodward Fab WFBR6. The power units can also be adapted to fit most standard 22mm shafted machines.
( 9 )
$560.99
Allstar Performance heated tire groovers include various sizes of tapered, razor-sharp blades to quickly add traction to your rubber! Allstar groovers are available in various models, including the popular 1,000 watt unit with four settings; the "all-in-one" version with built-in temperature controls; and the 220 V groover intended for international use. If your tires need a little more bite, turn up the heat and get your groove on!
( 1 )
$629.99
—
$679.99
NOCO GENIUSPRO25 smart battery chargers are professional units with more performance and more automation. They feature an advanced architecture that pushes the limits of power and efficiency for incredibly compact-sized chargers. GENIUSPRO25s are fully automatic smart chargers, maintainers, power supplies, and battery desulfators with temperature compensation rated at 25 amps for all types of automotive, marine, and deep-cycle batteries. Features: * Multi-voltage charger—6 V (25-amps), 12 V (25 amps), and 24 V (12.5 amps) for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion * Designed for pros who need absolute performance and uncompromising functionality * Ultra-flexible silicone cabling--down to -40 degrees C--with protective nylon braided shielding for maximum protection against abrasion * Dual-voltage power supply: 12 V (25 amp) and 24 V (12.5 amp) to maintain constant power delivery without unwanted ripple, noise, and transient spikes during ECU flashing, reprogramming, and diagnostic testing * An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates to maximize battery life and enable fast charging * Detects batteries as low as one volt. Or use the force mode that allows you to manually begin charging dead batteries down to zero volts * Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life. Plus, cutting-edge battery repair modes for 6/12/24 V batteries
Not Yet Reviewed
$599.95
OTC Robinair RG3 portable refrigerant recovery machines are the new standard in refrigerant recovery. OTC knows all jobs are different—from a rooftop to a marine HVAC system—and the RG3 units are easy to use and ideal for any residential and appliance sized recovery job! Capable of recovering both liquid and vapor refrigerant, they are engineered to withstand the punishment of daily use, even under extreme conditions. RG3 portable refrigerant recovery machine features include: * Easy to operate, rugged case with easy-to-read gauges, comfortable handle and simple two valve controls * Compact and lightweight (40 percent smaller footprint, easy to carry, weighs approximately 18 lbs.) * Oil-less compressor is capable of recovering both liquid and vapor * Handles almost all refrigerants (works with all common CFC, HFC, HCFC refrigerants including R-410A) * High-efficiency cross-flow design; layout of fan and condenser is maximized for shorter cycle times * High-pressure safety shut-off switch automatically shuts-off machine if pressure rises above 550 psi * IEC connector and power cord
( 2 )
$569.99
Sunex Tools 2-ton engine cranes feature a 4-position boom and a heavy-duty, slow release. They are made of high-quality steel for long-lasting performance and have a 5-ton power unit, along with 4 in. wheels on the front and 3.5 in. casters on the back, to help make them steady, yet maneuverable. If you have an engine you're working on, do it the right way with Sunex Tools 2-ton engine cranes.
( 7 )
$744.99
Schumacher Electric ProSeries battery charger/engine starters deliver solid, long-lasting, energy-efficient performance for standard, AGM, gel and deep-cycle batteries. Wheeled for easy mobility, these heavy-duty units boost and charge batteries, keeping your vehicle powered up and ready to hit the road. The ProSeries model provides exceptional versatility with its 250/125A engine start that's powerful enough for SUVs, trucks, and large engines, along with a high-amp boost rate to quickly bring a deeply discharged battery back to life. The chargers are available in a variety of sizes, voltage and amperage ratings. Additional features and benefits include: * Model-specific charger manual * Digital display, LED indicators, and push-button controls * Easy start/stop interface * 6-gauge output cables with heavy-duty 300A color-coded copper clamps and 12 ft. cable reach * Microprocessor-controlled; automatically adjusts amperage rate, to charge and maintain * Delivers 6-2 amp trickle/maintenance charge * Multi-stage charging for added precision, safety, and battery life * Handle and durable wheels provide easy maneuverability and mobility * Float mode monitoring maintains optimum battery charge * Auto voltage detection and reverse hook-up protection for safety * Schu Eco Energy--meets the highest industry standards * DOE-compliant
( 2 )
$679.99
Metrovac Vac 'N Blo Pro Commercial Series vacuums have incredible suction power (an amazing 95 in. of water lift) generated by the twin fan 4.0 peak hp motor that will clean your car's interior in no time. The unit features every conceivable specialized detailing vacuum cleaner attachment you need, including 30 ft. of car wash quality crush-proof hose, a claw-type upholstery tool, a crevice tool, a 1.5 in. to 1.25 in. hose cuff adaptor, and more. As a powerful blower, Vac 'N Blo Pro can also clear water from inaccessible areas of your car—and blast dust from A/C vents and shift boots. With the 30 ft. of commercial-quality hose, you can use the tool while it's mounted on the wall or slip it off the wall mount bracket and effortlessly roll it to your vehicle. A hose bracket and tool caddy keep everything organized. Get powerful, professional results!
Not Yet Reviewed
$519.99
Summit Racing™ professional tool cabinets are the ultimate in tool storage. These units feature double wall steel construction, ball bearing drawer glides, and a premium locking system. The tool cabinets roll on four 5 in. casters capable of holding up to 520 lbs. each. All drawers have full-length aluminum lift latch handles, slip-proof drawer liners, and a 100 lb. weight capacity. Finished off with a black powdercoat finish, these cabinets are the perfect solution for your tool organization and storage needs.
( 4 )
$549.99
OEM Automotive Tools 21-gallon waste oil drains are portable upright pan/funnel and container units used for collecting fluids under lift-mounted vehicles. Product features: * Includes a removable filter screen * Simple air evacuation using only shop air and a chuck * Discharge hose length: 5/8 in. x 70 in. * Oil drain funnel diameter: 15 in. * Oil drain extension diameter: 22 in. * Funnel height adjustment: 45 in. to 62 in.
Not Yet Reviewed
$596.32
Phoenix portable air compressors can ensure that you're never stranded with a flat tire. These dependable units are specifically designed to be powered by your vehicle. Rugged and powerful, Phoenix compressors deliver air when you need it most. Order the model with options needed for your application.
( 1 )
$696.99
On Sale
Homak parts washers are ideal tools for getting grease and oils off of parts. These sturdy units feature 1.5mm thick legs with a 1.0mm frame for strength and rigidity, large one-piece tanks, a flexible nozzle, and work surface trays. An on/off switch is included with the electric pump, while injuries from fire are reduced thanks to a fusible linked lid arm. Clean parts without all the mess using Homak parts washers.
Not Yet Reviewed
$440.99
$396.89
REDARC In-Vehicle Battery Chargers are DC power supplies that provide regulated power for sensitive load requirements, including lamps, radios, communications equipment, pumps, TVs, and more from an automotive power system. The versatile chargers are available in 12 and 24 V units, with 10, 20, 25, or 40 amp output. These power supplies offer a wide input voltage range and optional voltage output for higher efficiency and improved functionality. Without a fan, the noise level is reduced and enables the unit to power hi-tech radio systems without interference. Encapsulated by REDARC's silicone elastomer, the power supplies can be easily mounted on the outside of the vehicle and used in marine situations. There is also built-in protection against surges and spikes.
Not Yet Reviewed
$675.00
—
$685.00
Stand and stretch—or shrink—with Baileigh Industrial MSS-16 Metal Shrinker Stretcher stands. These strong metal units offer an option to mounting your shrinker/stretcher. They provide foot-operated efficiency and a secure base. Mount your MSS-16 on Baileigh Industrial stands. Order the model preferred for your applications.
( 1 )
$538.65
Ingersoll Rand 2145QiMAX Impactools deliver maximum power, durability, and productivity! These 3/4 in. drive air impact guns are perfect for the most demanding applications. Ingersoll Rand Impactools are compact units weighing under 7.5 lbs. and offering 1,350 ft.-lbs. of maximum reverse torque. They're built to be rugged, with a highly efficient air motor and an easy-to-clean inlet screen, so you have less downtime, better tool performance, and less spent on compressed air. Work with incredible performance, industrial-grade durability, and efficiency with Ingersoll Rand 2145QiMAX 3/4 in. Impactools.
( 1 )
$689.99
Ranger RCD-2V vehicle wheel dollies are chassis-mount vehicle dollies that will free up your work bays! These dolly/support stands allow disabled or wheel-less vehicles to be effortlessly rolled forward, backward--or even sideways, thus, improving workplace productivity in garages or workshops with space limitations or restricted driving lanes. The RCD-2V dollies fit most vehicle models and years, and adjusts from 10 in. to 13.5 in. in height and 40.75 in. to 59 in. in width. Additional features include: * Durable steel construction * Each dolly has a 4,400 lb. weight capacity * Pinch-weld clamps and support saddles for easy vehicle loading and adaptation * Heavy-duty 4.5 in. nylon casters with precision ball bearings for effortless mobility * Lockable swivel casters * Use dolly as single unit or in pairs (two units are typically required for complete support of cars and trucks)
( 1 )
$525.00
The REDARC in-vehicle battery chargers are DC to DC units designed to charge your secondary battery banks to 100 percent state of charge while on the move. These chargers allow you to charge your batteries by solar while driving or by portable stationary panels. You can adventure with the confidence that your batteries will be charged to their optimal levels, thanks to a unique multi-stage charging algorithm that provides specific charging profiles tailored to all common battery types. REDARC chargers are perfect for charging AGM, gel, standard lead acid, calcium, and LiFePO4 batteries. The unit works with 12 V or 24 V vehicle systems and with either standard or variable smart alternators.
( 2 )
$620.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
