Availability
DeWitts Radiator oil cooler line kits include an oil adapter block, GM oil seal, metric bolts, and a 1/8 in. NPT plug. They are designed to bolt directly onto any LS series engine and provide two large -10 AN connections. The adapter has a port for the factory temperature sender and an auxiliary port for other needs. These installation kits also everything needed for hooking up an aftermarket internal oil cooler on your C5 Corvette and the LS-based engines listed in the Applications section.
( 1 )
$519.99
S&S Cycle oil supply line installation kits include a special transmission oil pan and stainless steel hard lines that make hook-up straight forward and attractive. Features: * Allows the installation of a specially machined engine or crankcase * Wrinkle black oil pan incudes oil line routing * Oil pickup tube routed to rear of oil pan for extended high acceleration (or wheelies) * Stainless steel hard oil lines
Not Yet Reviewed
$699.95
Vibrant Performance braided flex hose are available in stainless steel and nylon braided covers which provide excellent abrasion resistance and surrounds a reinforced synthetic rubber inner liner. Offered in several lengths and AN sizes, they are suitable for oil, water, fuel, methanol, coolant, vacuum service, and E85. Note: These hoses are NOT suitable for use as brake lines or other hydraulic pressure lines, nor are they suited for extended submersion in fuel or oil (not recommended for in-tank applications).
( 84 )
$506.99
—
$815.99
Too many varying types of hoses under the hood? Fragola Performance Systems Race-Rite hose is designed to be compatible with all pumped fluids, and capable of tight bend radiuses, as well as higher flow rates. It features an enlarged inner diameter with a smoothbore conductive PTFE core that utilizes a convoluted exterior and black aramid braid cover. This hose is available in multiple sizes and lengths to properly fit your application. Enjoy the simplicity of the ultimate fuel, ATF (automatic transmission fluid), and coolant non-pro hoses: Fragola Race-Rite! Features and specs: * Smoothbore conductive PTFE core is resistant to fuel permeation * 60 percent lighter than their 8400 Series black nylon race hose * True-to-size I.D. for improved flow rate * Works with all fluids, including ethanol-type fuels, ATF, coolant, and oils * Operating range -65 degrees to 500 degrees F * Ideal for use with Race-Rite crimp-on hose ends
( 4 )
$579.99
—
$636.99
Too many varying types of hoses under the hood? Fragola Performance Systems Race-Rite PRO hose is designed to be compatible with all pumped fluids, and capable of tight bend radiuses, as well as higher flow rates. It features an enlarged inner diameter with a smoothbore conductive PTFE core that utilizes a convoluted exterior and black aramid braid cover. This hose is available in multiple sizes and lengths to properly fit your application. Enjoy the simplicity of the ultimate fuel, ATF (automatic transmission fluid), and coolant pro hoses: Fragola Race-Rite PRO. Features and specs: * Ideal in dry sump or high vacuum applications * Convoluted exterior with added spiral wire increases hoop strength to prevent hose sucking shut under high vacuum * Added externally wound, spiral wire increases flexibility and bend radius * Smoothbore conductive PTFE core is resistant to fuel permeation * 50 percent lighter than Fragola's 8400 Series black nylon race hose * True-to-size I.D. for improved flow rate * Works with all fluids, including ethanol-type fuels, ATF, coolant, and oils * Operating range -65 degrees to 500 degrees F * Ideal for use with Race-Rite crimp-on hose ends
Not Yet Reviewed
$502.99
—
$632.99
Vibrant Performance braided PTFE hose present endless ways to build your high performance fluid delivery system. They are available in many lengths and AN sizes with either a stainless steel or nylon braided covering that offers superior protection against abrasion and corrosion. The PTFE inner liner can handle higher operating temperatures, operating or burst pressures, and eliminates vapor fuel permeation. These race-proven hoses are suitable for all types of commonly used race fuels and oils, as well as brake, transmission, clutch, power steering, and coolant fluids. Vibrant Performance braided PTFE hose deliver outstanding quality and options to make your plumbing project a success.
( 41 )
$599.99
—
$759.99
Clearance
Continental fuel injection hose is designed especially for fuel injected vehicles. The blue Fluorelastomer nitrile tube is specially compounded to resist gasoline, oil, diesel, and other fuels, while the high-strength synthetic textile reinforcement brings minimum burst to 900 psi. Continental fuel injection hose meets SAE specification J30R9.
( 27 )
$861.99
$511.99
—
$653.50
On Sale
Earl's Performance UltraPro hoses go way beyond "good enough." Why would you plumb your high performance, high-powered vehicle with traditional rubber hose, even if it's steel braided? Earl's UltraPro Series of stainless steel and polyester braided hoses are designed to withstand today's modern fluids, harsh environments, brutal vibration, flow requirements, and extreme pressures. You no longer need worry about frequent replacement, deterioration from fuels, and the safety hazards of vapors and leaks. And, UltraPro hoses are much lighter, more rugged, more flexible, and offer more flow. All of this, plus great looks, peace of mind, and a price that's hard to argue with—why wouldn't you choose Earl's UltraPro hoses for performance plumbing? Features of superior Earl's UltraPro hoses: * PTFE inner liner impervious to all known fuels, oils, and coolants used in automotive applications, is carbon-infused for static dissipation, and has ultra-low coefficient of friction to promote maximum flow * Double-helix ribbed inner hose liner offers extreme flexibility and full-flow, making tough plumbing jobs a snap with fewer hard connections * Liner is reinforced with an outside glass-fiber wrap for additional strength and integrity * Polyester braid hoses are up to 67 percent lighter, and the stainless steel braid hoses are up to 37 percent lighter than traditional rubber hose with stainless steel braid * Available in popular -6, -8, -10, -12, -16, and -20 AN sizes * Available in specific lengths and bulk to meet your application needs
Not Yet Reviewed
$549.95
For the traditionalist, Russell offers their ProClassic II black hose. If your belief is that the hose you use to plumb your ride or racer should be black, then ProClassic II is for you. The all-black nylon fiber braid of the outer cover wraps around a CPE synthetic inner liner for abrasion resistance. Plus, the chlorinated polyethylene inner liner has a bonded, multi-braid stainless steel wire to improve the bend radius, with less possibility of collapsing when plumbing those tight areas. Safe for fuel, oil, antifreeze, and other fluids, Russell hose is easy to cut and easy to assemble. For classic looks and professional quality you can count on under the hood, choose Russell ProClassic II hose—available in a variety of lengths and AN sizes.
( 39 )
$631.95
—
$832.95
On Sale
Earl's Performance Pro-Lite 350 hose is constructed from a tough, abrasion-resistant nylon sheathing banded to the textile inner braid that's embedded in the synthetic rubber liner. This gives the hose incredible flexibility, while maintaining the ability to withstand high vacuum and hot oil temperatures. The hoses are rated to withstand a maximum pressure of 350 psi and an operating temperature range of -40 to +300 degrees F. Pro-Lite 350 hose can take the most demanding conditions and still deliver you to the winner's circle.
( 24 )
$524.95
—
$799.95
This new Russell ProClassic hose is designed for racers and performance enthusiasts who want high-quality plumbing that is lighter and easier to assemble than traditional braided stainless steel hose. It features a lightweight nylon fiber braid over a durable synthetic rubber core with a maximum pressure rating of 350 psi. Russell ProClassic hose is capable of handling nearly every plumbing task on your vehicle and is safe for water, oil, and antifreeze. The hose is easy to cut, making for quick, easy assembly. Available in a variety of hose sizes and lengths, this Russell ProClassic hose can be used in many different areas.
( 68 )
$605.95
—
$832.95
Continental heater hoses are designed for vehicles that need custom-routed heater hoses. They meet or exceed SAE J20R3, D1 specifications, so they'll stand up to the heat. Continental heater hoses use rugged construction; most are manufactured from Versigard rubber—a compound highly resistant to heat, oil, and weather. Their patented knit reinforcement is typically made with Tylanar fabric, a material that also meets the safety requirements. Some models incorporate other high-grade materials, as well. Continental heater hoses are available in a variety of diameters and lengths compatible with numerous of makes/models.
( 11 )
$529.99
—
$750.99
Earl's Performance Staubli SPT ball locking dry break couplings provide smooth leak-free performance for ethanol, oil, and all fuel types. Their strong aluminum construction and specialty seals ensure longevity while their smaller size eases installation. These lightweight couplings are highly durable, available in a variety of sizes, and designed not to leak with valve disconnection. Keep your vehicle's fluids running safely with Earl's Performance Staubli SPT ball locking dry break couplings.
Not Yet Reviewed
$723.95
—
$775.95
Vintage Air Stainless Steel ProLine kits take you're climate control install to the next level. Instead of boring old rubber lines under your hood, Vintage Air has assembled these kits with stainless steel tubing, stainless steel TiteFit nuts, braided stainless steel ProLine hose, ProLine fittings, and your choice of 4-way, 2-way, or no firewall bulkhead. Vintage Air ProLine kits will give your ride a serious, professionally finished look! Contents Include: * Choice of bulkhead (4-way, 2-way, or none) * 6 ft. of #6 Stainless steel tubing * 3 ft. of #8 Stainless steel tubing * 6 ft. of #10 Stainless steel tubing * 2 ft. of #6 Standard rubber A/C hose * 2 ft. of #10 Standard rubber A/C hose * 1 ft. of #8 Braided stainless steel A/C hose * 1 ft. of #10 Braided stainless steel A/C hose * 2 #8 Straight Proline hose end fittings * 2 #10 Straight Proline hose end fittings * 1 #6 Straight hose end barb fitting with ferrule * 1 #6 90 Degree hose end barb fitting with ferrule * 1 #10 Straight hose end barb fitting with ferrule * 1 #10 90 Degree hose end barb fitting with ferrule * 4 #6 Stainless steel braze-on line ends * 2 #8 Stainless steel braze-on line ends * 2 #10 Stainless steel braze-on line ends * 4 #6 TiteFit nuts * 2 #8 TiteFit nuts * 2 #10 TiteFit nuts * 2 #8 Stainless steel braze-on nuts * 2 #10 Stainless steel braze-on nuts * 1 134a Braze-on #8 (high side) service port * 1 134a Braze-on #10 (low side) service port * 6 #6 O-rings * 4 #8 O-rings * 6 #10 O-rings * 1/8 oz. Tube of refrigerant oil
Not Yet Reviewed
$539.99
—
$603.99
Earl's Performance Pro-Lite Ultra hose is the premier choice for your hot rod or race car. It features advanced designs that make the hose ideal for high-pressure applications up to 500 psi. Their inner tube of oil-resistant "PKR" synthetic rubber won't degrade or leak when exposed to most fluids, and it's reinforced with a stainless steel braid that greatly increases the hoop strength—keeping the hose from bulging or separating from its fittings. Finally, the braided nylon fiber cover is resistant to oil, abrasion, and extreme weather, keeping Pro-Lite Ultra hose looking great and functioning the way it's meant to.
( 3 )
$549.95
—
$673.95
This SAE 30R7 rated Summit Racing™ braided nylon hose is designed for use with gas, oil, diesel, and other fluid applications. It uses a higher grade nitrile inner core that is specifically compounded to hold a higher fuel resistance than any other nylon hose product on the market. It can handle heat levels up to 275 degrees F and a maximum working pressure of 350 psi. Summit Racing™ braided nylon hose is lightweight and flexible. These features, combined with its ease of assembly, make it the fastest growing choice of hose products for racing and performance enthusiasts.
( 190 )
$587.99
For the enthusiast looking for a quality performance hose, while also wanting to save assembly time and money, Russell Twist-Lok hose is the way to go. Easy to assemble, flexible and lightweight, it is ideal for most automotive applications where a stainless steel braided line is not necessary. This synthetic rubber hose is pressure-rated up to 250 psi and suitable for most fuel and oil systems. It's available in a variety of lengths, diameters, colors, and AN sizes.
( 52 )
$594.95
Aeroquip's AQP braided stainless steel racing hose uses a patented elastomer tube to resist oxidation, and a partial inner and full outer stainless steel braid for strength. It is compatible with most fuels, coolants, and oils. With a temperature range of -55 to 300 degrees F, and a maximum pressure rating of up to 1,000 psi, it can handle nearly any plumbing job safely and securely.
( 73 )
$646.99
On Sale
These high-temperature elastomeric auto-flex hoses are ideal for almost all street and marine applications, and many non-critical competition uses. These high-quality hoses have a nice looking stainless braided outer cover that protects the synthetic rubber inner liner, allowing continuous operating temperatures of -40 degrees to 300 degrees F. These auto-flex hoses are good for fuel, oil, water, and many other fluids.
( 30 )
$549.95
Summit Bucks
ACDelco Gold molded radiator coolant hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. These OE-style hoses are specially designed, GM factory-molded replacements to fit today's smaller, tighter-fitting engine compartments. ACDelco Gold coolant hoses are temperature rated from -40 to 275 degrees F (-40 to 135 degrees C) and are approved for marine applications. Order the model recommended for your vehicle. (Note: Do not use these molded coolant hoses for fuel or oil transfer purposes.) Features include: * Protective sleeves (where applicable) help duplicate General Motors OE for proper fit and function * Designed to resist electrochemical degradation for durability * Available for vintage and heavy-duty applications
( 72 )
$510.99
Motorcraft power steering hoses are competitively priced for all Ford and Lincoln vehicles, offering great value and long-lasting quality. Engineered from high-quality materials for excellent performance under operating conditions, most feature EPDM rubber that resists oil and grease, while withstanding ozone and high-underhood heat. Motorcraft power steering hoses provide the same original equipment fit for an easy installation.
( 2 )
$517.99
Dayco Gold Label silicone heater hoses are designed for top performance and long life in heavy-duty applications. These SAE 20R3, Class A hoses are manufactured with special silicone compounds and then reinforced with one-ply braided polyester yarn. They are highly resistant to the damaging effects of oil, ozone, coolants, and coolant additives. These hoses are extremely flexible and feature the highest temperature rating and longest service life of any Dayco heater hose product. Properly installed with special silicone clamps, these hoses will provide up to six times more service life than traditional coolant hose.
Not Yet Reviewed
$608.99
Fragola Performance Systems takes hose just as seriously as it takes hose ends. Series 3000 stainless race hose is manufactured to the highest aerospace-quality standards for years of trouble-free service, even in the most demanding circumstances. Dual layers of rugged, woven stainless steel create the perfect protection against collapse and abrasion. Plus, their unique inner liner is compatible with all hydrocarbon and alcohol-based fuels, as well as synthetic and natural-based lubricants. Fragola Series 3000 stainless race hose is available in assorted sizes and lengths to perfectly fit your application.
( 13 )
$552.99
—
$732.99
DeatschWerks stainless steel double braided hose is offered in PTFE and CPE rubber material. Their selection of sizes and several lengths delivers compatibility with the increasing list of available pump gases, race fuels, and ethanol blends wrapped in stainless steel braided coverings. Choose the size, length, and material preferred for your plumbing project. DeatschWerks stainless steel hose inner material choices: * CPE—rubber fuel lines are cord reinforced for high-pressure and lined for compatibility with ethanol-based fuels * PTFE—lines have increased fuel compatibility for methanol and e100; PTFE also allows tighter radius turns and zero fuel vapor permeability
( 6 )
$550.00
—
$600.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
