Availability
Showing In Stock Items. Show All 35 Items.
Peterson Fluid Systems oil filter mounts with engine oil primers allow you to use a standard drill to prime your engine easily. With their unique R4 rotor design, these small pumps can deliver 20 psi of oil pressure in as little as 10 seconds. This ensures that all your bearing surfaces are properly oiled, cutting down on engine wear. The oil filter mounts feature billet aluminum construction, AN port fittings, and tube or firewall mount. (Mount bracket is sold separately.)
( 3 )
$512.99
—
$559.99
Waterman Racing complete belt drive kits include the bracket assembly, fuel pump pulley, crankshaft mandrel assembly with pulley, belt and hardware for installation. The kits are designed to mount a fuel pump on either the driver or passenger side on a Chevrolet small block or big block engine. Order the belt drive kit recommended to fit your application.
Not Yet Reviewed
$699.99
Milodon marine oil pans are designed to provide optimum performance for all applications. They're available for flywheel aft and forward installations, are fully baffled, trap-doored, and include windage trays. They are made from extra-heavy gauge steel to withstand extreme use and carry large oil capacities for high-rpm prop boats or high-load, heat-creating jet drive boats .
( 6 )
$599.95
—
$729.95
Moroso drag/road racing oil pans are made with thick, precision laser-cut steel rails, and feature a 7 quart capacity that moves oil away from your rotating assembly, offering excellent oil control and horsepower savings. The pans' race-proven diamond shape, four trap door assembly, and anti-slosh baffles keep your oil contained in the oil pump pickup area during road and drag racing. Moroso drag/road race oil pans have a billet aluminum adapter with a 1/4 in. NPT sensor port that allows a 13/16th thread Moroso or OEM filter to be mounted in the stock location--no need to run a remote oil filter. These pans use a stock dipstick.
( 40 )
$526.99
—
$622.99
Built for racers and engine builders who craved the performance, Moroso racing vacuum pumps are manufactured from billet aluminum and feature a precision-machined shaft, rotor, and bearings that will withstand the rigors of racing. They work by producing high crankcase vacuum, which increases power by improving ring seal, preventing blowby, and detonation. Allowing the use of lower-tension piston rings for less friction. These positive pumps are much more consistent and effective than header-mounted evacuation systems.
( 5 )
$785.99
—
$802.99
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$573.95
$515.95
Baxter Performance oil filter relocation kits offer a range of benefits that elevate your engine's performance and protection. This innovative combo kit includes the cartridge-to-remote oil filter adapter and the 6-port remote mount. The cartridge-to-remote oil filter adapter allows you to effortlessly relocate your oil filter and convert it into a convenient spin-on oil filter format, featuring 3/4 in.-16 threads. This allows the ability to add an oil cooler not otherwise available for the Pentastar engine and is perfect for supercharged and turbocharged modification or high engine torque conditions that produce high oil temperatures. It also provides greater oil retention in engine and faster oil pressure at startup. The top mounted remote adapter is equipped with Schrader valve for complete oil evacuation of the oil filter and added oil cooling system back to the sump for oil change. It also, backflows oil pump pickup tube screen to dislodge contaminants and debris prior to draining oil pan. The included custom bracket allows you to relocate the oil filter mount to the driver's side of the engine, positioned just above the front differential—this strategic placement enhances both accessibility and maintenance convenience. Key features: * Crafted with precision—constructed from anodized machined aluminum, guaranteeing durability and longevity * Equipped with -10AN male fittings * Addition of Viton® seals ensures a secure and reliable seal—preventing leaks and ensuring peak performance * Custom bracket relocates the oil filter mount to the driver's side of the engine
Not Yet Reviewed
$679.46
No starvation! Canton Racing road race oil pans feature their competition baffling system of trap door baffles and/or slosh baffles. These systems flow oil to the pickup compartment and then keep it from flowing or sloshing away from the pickup during turns, acceleration, and braking. Their wide, low-profile sumps deliver maximum oil capacity and ground clearance. Many pans also include provisions for an optional pan mounted dipstick and a magnetic drain plug. Feed your engine with Canton Racing road race oil pans.
( 71 )
$509.00
—
$666.00
Milodon Circle Track oil pans ensure an ample supply of lubricant for left-hand turn applications. They feature durable steel construction and a gold iridited finish. These oil pans were designed for IMCA and hobby stocks. Though they appear stock on the outside, they contain sufficient horizontal baffling to control 100 percent of the oil, allowing for an ample oil supply under all racing conditions. A full-length windage tray is mounted in the oil pans with quarter-turn fasteners for easy removal. A matched pickup is located in the right rear corner position for maximum oil availability.
( 1 )
$639.95
—
$709.95
On Sale
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$599.95
$538.95
Mishimoto baffled oil catch cans are designed to separate oil particles from the PCV air that would normally have just been routed back to your intake. They feature custom grooves in the catch can's inlet that turbulates the air longer and ensures that all of the oil sinks to the bottom, leaving nothing but clean air to pass through the 40 micron bronze filter to the intake. An internal baffle keeps the collected oil from splashing around under race conditions. These catch cans are machined from 100 percent billet 6061 aluminum, and accept AN fittings at the inlet, outlet, and drain area—allowing for over 27 possible configurations. For maximum fitment options, the top cog mounting setup enables the cans to be mounted from multiple angles. To make maintenance easy, the drain plug can be removed to allow for AN return to the oil pan. Mishimoto baffled oil catch cans are washable, unlike many other cans that require you to replace your filtration system, and they're available in a variety of colors. Order the model recommended to fit your vehicle, engine, and/or transmission application.
( 35 )
$507.95
—
$584.95
Moroso dry sump breather tanks allow a place for air to escape to the atmosphere. They're designed to be used as a remote breather and oil separator on dry sump tanks and rear axle housings. They have -12AN fittings to simplify plumbing, can be mounted to any panel with included mounting straps, and come complete with a filtered breather and draincock. A perfect companion for Moroso's Racing vacuum pumps or dry sumps, these tanks are all-aluminum and lightweight.
( 3 )
$505.99
CVR mechanical vacuum pumps can be used on wet or dry sump engines and are designed with precision-sealed roller bearings. They are precision-machined from T-6 6061 aluminum and clear hard-anodized for extended wear. CVR pumps achieve greater vacuum sooner and are maintenance-free. They're also available as a kit with a mounting bracket for small block and big block Chevrolet cylinder heads, or any engine using a motor plate.
( 1 )
$560.99
If you're overhauling an older motorcycle engine or building a lubrication system from scratch, consider the turnkey ease of S&S Cycle oil pump kits. They offer the same width oil supply and return gears as a stock Harley-Davidson® aluminum pump, but these driveshaft gears increase potential oil volume delivery by 25 percent over stock on some engines. S&S pumps are machined with an oil pressure bleed-off passage, relieving pressure build-up on top of the valve to maintain consistent oil pressure. Excess oil is also routed directly to the supply side of the pump to reduce the amount returned to the tank—which means less foaming and cavitation. The kits are available for a variety of bikes, including Big Twin models. S&S Cycle oil pump kits include: * Complete oil pump assembly * Pinion shaft pump drive gear * Oil pump driveshaft gear * Breather gear * Mounting hardware * Fittings and gaskets * Instructions
Not Yet Reviewed
$649.95
Canton Racing drag racing wet sump oil pans are designed to provide the best oil control and power savings possible for each application. Canton Racing drag racing wet sump oil pans are available in several chassis configurations for all levels of performance from Bracket to Pro Drag, and most are available in steel and aluminum.
( 44 )
$518.00
—
$729.00
Canton Racing street/strip wet sump oil pans come in configurations ranging from production replacement pans to increased-capacity deep and shallow pans with race-proven oil control systems. In addition, Canton Racing street/strip oil pans include magnetic drain plugs and, in most pan applications, an oil temperature fitting.
( 80 )
$509.00
—
$519.00
Canton Racing Accusumps are oil reservoirs that connect to the engine's oiling system. They are designed to collect pressurized oil from your engine and store it so that it may be discharged when oil pressure is low. Canton Racing Accusump oil accumulators deliver oil before starting to eliminate dry start scuffing (pre-oiling). They also discharge oil during low oil pressure surges to protect against engine damage during demanding racing conditions.
( 22 )
$796.00
Whether you're dressing up or simply replacing an old oil pan on your vehicle, Ford Performance Parts has the oil pan for you. These oil pans are available in several finishes for a variety of applications, so there's sure to be one to suit your needs and your style.
( 98 )
$769.99
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 418 )
$599.99
Milodon drag race oil pans ensure an ample supply of lubricant under rapid acceleration. These pans have a full-length louvered windage tray and double trap doors to provide a positive oil control system. This results in consistent oil pressure and significant horsepower output increases. They also feature durable steel construction and a gold iridited finish.
( 18 )
$589.95
—
$599.95
Milodon external oil systems allow for the bypassing of irregular and restrictive stock internal oil passages. They also allow for the placement of the pickup in an optimum position, plus the use of free-flowing braided line. These kits are available with static or swivel pickups with single or dual lines, and with oil pumps with different levels of output. They provide the optimum in oiling for all types of competition and come complete with all necessary bolts, fittings, O-rings, etc., for installation. A Milodon oil pan, windage tray and oil pump drive shaft will complete the package. In some cases, notching the frame is required.
( 4 )
$579.95
Canton Racing marine series oil pans are designed and built to withstand the unique conditions found in marine applications. They are constructed from 14-gauge steel to eliminate stress cracking. Built with high-capacity sumps to combat heat and add longevity to the oil, they are powdercoated and use brass plugs for corrosion protection. These marine series oil pans feature 1/2 in. NPT oil drain fittings on each side and trap door baffles and windage trays to prevent oil slosh from the motion of the boat.
( 14 )
$508.00
—
$625.00
The heart of any Circle Track oil pan is its baffling. The baffling systems in Canton Racing's Circle Track wet sump oil pans are the result of extensive testing on all types of tracks and engine configurations. There are several models to choose from to suit your needs.
( 5 )
$513.00
—
$728.00
Moroso marine oil pans are designed to meet the unique needs of boat owners. Baffling and placement of the pickup is critical due to the torturous conditions encountered in marine use, with boats pitching, tossing, and bouncing in rough water. These pans are constructed of super-tough, high-quality steel and are gold iridited for corrosion protection. Chrome versions are also available.
Not Yet Reviewed
$653.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
