Availability
Showing In Stock Items. Show All 34 Items.
Edelbrock AVS2 Series carburetors are the next generation of carburetors. Featuring annular flow primary boosters, adjustable secondary air valves, and a new calibration, these AVS2 carburetors offer improved idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the carburetor transitions from idle to full throttle. Each annular booster features eight, equally spaced orifices to improve fuel metering. The improved flow metering makes this carburetor ideal for use with a wide variety of small-block and big-block engines with either dual- or single-plane intake manifolds.
( 824 )
$519.95
—
$586.95
Turbosmart StraightGate50 vacuum wastegates are zero-offset butterfly-style units that allow enormous flow and almost linear control, and unparalleled boost control throughout the entire operating range. These high-flowing wastegates are simple to use, and packed with performance, flow, and features. The zero-offset butterfly valves are subjected to exhaust drive pressure equally on both halves of the valve, which pivots centrally, resulting in a self-balanced valve against any drive pressure. This means less work is required to act against even the highest drive pressures, and a wider tuning window is possible, no matter how the valve is actuated. The increased flow is achieved through the efficiency of a straight-through valve versus a poppet-style valve where the exhaust gas must be turned 90 degrees by the valve. Turbosmart pneumatic StraightGate 50s are available in a boost-based pSG50 6 psi or vacuum-based pSG50v 6 InHg versions. Both pneumatics take the electronic eSG50 version and simplify control via a traditional boost-based or vacuum-based actuator. Select the one you prefer. Key features: * 50mm (1.97 in.) butterfly-style zero-offset valve * 383.9 CFM/10.87m3 per minute flow * Stainless steel (630) butterfly and shaft * Stainless steel (347) main body * Stainless steel, heat-treated 431, V-band clamps * 6262 T-6 anodized aluminum bracket and actuator * Turbosmart unique locking collar ring * Base spring options from 6 psi to 42 psi * Suitable for single or twin port boost-based control * Stainless steel (N60) linkages and control arm
Not Yet Reviewed
$637.41
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$549.95
Turbosmart Gen-V WG50 Pro-Gate external wastegates are cost-effective, high-performing 50mm units. They provide extensive user configurability, world-leading extended thermal performance, fatigue resistance and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, the Gen-V features a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports—and provides a range of springs.
Not Yet Reviewed
$555.95
—
$561.95
Precision Turbo and Engine's high-quality yet economical Pro Series Gen2 wastegates are designed specifically for use with CO2-based boost control systems. The wastegates offer quicker response time, accuracy, and durability under the high-pressure demands of CO2 actuation, when compared to standard wastegate designs. The Pro Series Gen2 external wastegates are fully adjustable and features the following: * High-grade, high-temperature stainless steel and billet aluminum construction for strength, style and functionality at an affordable price * A 347 stainless investment cast valve body provides consistent performance without the worry of fatigue or failure, while also allowing for accurate boost control * An internal nickel chromium alloy valve * Three individual ports (2 on the bottom can and 1 on the top can) * Comes complete with stainless steel inlet and outlet flanges * Unique, stabilizing precision pins prevent the inlet/outlet flange from spinning * Several different 17-7 precipitation hardened springs for further adjustment of desired boost levels * Compatible with most aftermarket manual and electronic boost controllers for ease of use * Includes clamps necessary for installation Note: As an added bonus, each Precision Turbo external wastegate is warranted to be free from manufacturer is defect for a period of 12 months or 12,000 miles!
Not Yet Reviewed
$772.79
Stromberg 81 carburetors are the perfect partner for your early Ford 4-banger or V8-60 engine. Here are the product highlights: * Super-accurate pressure die-castings from new dies, CNC-machined for a blue-print parts fit * New base casting with correct 1.0625 in. throttle plates. Parkerized and black lacquered just like they used to be * Two slip-in aluminum inserts replicate the original 0.81 in. venturi; correct booster signal with minimum turbulence * O-ring sealed sleeve pressed into the accelerator pump well, for the correct 81 pump * Reinforced air horn casting with extra material around the float bowl lid to eliminate warping and leaks * Tested and jetted correctly for this new model: 0.036 in. main jets and a No. 71 power valve * 116 cfm airflow capacity (independently verified) measured at 1.5 in. Hg (same as they measure 4-bbl carbs) * New brass float, made in USA on original Stromberg dies * Specially developed no-stick S-Jet inlet valve * New, correct-size 81 base gasket * Stainless steel linkage throughout. Stainless springs, accelerator pump rod, throttle linkage, choke plate, lever and more * Beautiful investment cast stainless steel throttle and accelerator pump levers * Correct pale chromate zinc treatment using the original Ford Service Bulletin process * Original-style riveted throttle and choke shafts * Extensive dyno and road tests—and great feedback! * Note: Original hand throttle parts are not included * Remember, like any carburetor, the new Stromberg 81 needs proper installation and tuning for optimum performance. Every 81 comes with full installation instructions
( 1 )
$555.00
Precision Turbo and Engine high-quality, yet economical PTE wastegates are perfect for the automotive enthusiast looking to get the most from their turbocharged car, truck or any other vehicle. They're available in several relief diameters. Order the PTE wastegate suited to your application. Key features and benefits include: * High-grade, high-temperature stainless steel and billet aluminum for the best in strength, style and functionality at an affordable price * Stainless investment cast valve bodies provide consistent performance without fatigue or failure, while also allowing for accurate boost control * An internal nickel chromium alloy valve * Different 17-7 precipitation hardened springs for further adjustment of boost levels (not water-cooled wastegate) * Standard bolt-style or clamp-style flange (depending on model) configuration for easy mounting * A satin black anodized finish with 6061 aluminum billet cap * May be direct replacement. All are compatible with most aftermarket manual or electronic boost controllers for ease of use * All clamps necessary for installation (not with PW39 model)
( 3 )
$761.59
Turbosmart Gen-V WG60CG Pro-Gate compressed gas wastegates are cost-effective, high-performing 60mm units. They're designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed-air WRC applications. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, optional liquid cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG60CG Pro-Gate compressed gas wastegates are engineered to win!
Not Yet Reviewed
$739.95
Turbosmart Gen-V WG50CG Pro-Gate compressed gas wastegates are cost-effective, high-performing 50mm units. They're designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed-air WRC applications. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, optional liquid cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG50CG Pro-Gate compressed gas wastegates are engineered to win!
Not Yet Reviewed
$587.95
Demon Carburetion Shadow Black Street Demon carburetors redefine the fuel/air mixer with an all-new black ceramic coating which acts as a protective barrier to heat and corrosion. They offer car enthusiasts a straightforward design to deliver stable idle, amazing throttle response, and smooth performance. With optimized calibration and a dual-mounting pattern, they are ready to run … right out of the box! The carburetors feature an integrated fuel bowl/main body design, with the gasket above fuel level, and no plugged passages--eliminating all potential leak paths. They include small 1 3/8 in. primary throttle bores, combined with proven triple-stack boosters, to facilitate crisp throttle response and drivability. Other specs and benefits: * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * 625 cfm airflow * Dual-mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 8 )
$649.95
FAST Big Mouth LT throttle bodies are cost-effective and stylish. If you don't want to go billet or can't afford it, these throttle bodies are the perfect choice for a variety of applications. An enlarged bore allows for increased airflow to support your higher horsepower, a progressive throttle pulley enhances drivability--especially at low throttle--and a double return spring provides a solid feel and increased safety. Here's an excellent alternative with all of the same features as their billet bodies--FAST Big Mouth LT throttle bodies with black wrinkle powdercoating.
( 9 )
$511.95
—
$618.95
Turbosmart Gen-V HP (high-pressure) comp-gate external wastegates feature a new unique appearance, Gen-V architecture, more options, and more boost. Upgrades include their modularity, improved thermal management, water cooling options, and even more gate flow than ever before. Turbosmart answered the needs of the diesel tuning community years ago with their HP wastegate range. These Gen-V units take all the advances in design and entineering—such as water cooling, rotating housing, industry-leading gate flow, and 1/8 NPT reference ports—and pushes the results to new heights. The new Gen-V HP springs options alone mean as much as 50 psi of base spring pressure. Included in the box is the new Gen-V HP mechanical wastegate with 35 psi worth of pre-loaded springs (10 psi inner and 25 psi outer), all inlet and outlet weld flanges, valve seat and clamps, and basic reference port fittings needed to get set up and running. These wastegates are available in different external relief diameters.
Not Yet Reviewed
$507.02
—
$634.95
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 251 )
$504.99
—
$1,045.99
Turbosmart Gen-V WG60 Power-Gate wastegates are cost-effective, high-performing 60mm units. They provide extensive user configurability, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG60 Power-Gate wastegates are engineered to win!
Not Yet Reviewed
$708.95
—
$713.95
These Vortech Maxflow BV57 bypass valves flow 1,300 cfm at 10 psi boost. They feature a large rolling diaphragm configuration with a 4 AN signal hose connection and dual filtered vents that allow for quick valve response. The valve head attachment method provides valve articulation for perfect sealing to the mechanically retained valve seal. The Vortech Maxflow BV57 bypass valves also feature adjustable spring preload and reconfigurable signal input locations. They can be mounted in any position and are adaptable to all types of boosted engine installations. They are designed for use in speed density configured applications only.
Not Yet Reviewed
$613.99
—
$660.99
Turbosmart is synonymous with compact, light wastegates to regulate the maximum boost pressure in turbocharger systems. Now, the company introduces Ultra-Gate 38HP, the highest pressure external wastegates of their kind in the world! These valve units retain Turbosmart's trademark attributes and are ideal for all high-PSI turbo diesel and drag racing applications. Ultra-Gate 38HPs are specifically designed for classic two-bolt flanges (71mm spacing). Features include a one-piece valve base, a locking collar to easily change springs, and the proven silicon Nomex diaphragm.
Not Yet Reviewed
$519.95
Turbosmart Gen-V Race Port blow-off valves are small, lightweight, high performance components for forced-induction competition level engines. Featuring unique collar designs and internal flow structures, they are 46 to 50 percent lighter and 25 percent smaller than the competition, while flowing 330 cfm, making Turbosmart Gen-V Race Port blow-off valves the highest flowing BOVs of their type on the market. They are offered in several different anodized colors and versions to fit your race application. All are supplied with vacuum fittings, V-band assemblies, and installed springs. Additional features: * Billet 6000 Series aluminum construction * Quick-release V-band collar for ease of installation and removal * MIL-Spec hard-anodized valve guide and stem * High-temperature silicone Nomex® diaphragm * Twin 1/8 in. NPT pressure ports for convenient positioning * 2.0 in. inlet flows over 330 cfm * Collar secured cap for quick spring changes * Most Race Ports have blue spring rated -18 to -14 InHg installed * Female flange version available to suit other manufacturer's 50mm flanges (no weld-on fitting supplied) and is 46 percent lighter * HE (Hall Effect) sensor cap versions allow you to monitor blow-off valve position for diagnostic or tuning purposes * Supercharger-specific versions have a soft pink spring rated -4 InHg installed, so it can stay open at idle, when supercharger is still producing boost
( 2 )
$519.95
—
$534.95
Garrett vent external wastegates optimize the flow of exhaust gases, providing greater control and performance. They accomplish this by venting exhaust gas around the turbine stage of the turbocharger to regulate turbocharger shaft speed, and they are CFD tested for maximum flow, thermal efficiency, and optimum boost control. Their optimized actuation, stability, and temperature resistance offer superior durability. Garrett vent external wastegates are available in several sizes with anodized aluminum actuator covers in several colors. Springs (3 to 25psi), fittings, flanges, and V-bands are included. Select the size and color preferred. Additional features and specs: * Base pressure: 14.7 psi/1 Bar * Robust design for easy diaphragm replacement * Cap design makes spring changes and serviceability easier and more reliable to perform * Liquid-cooled actuator ports for use on severe application
Not Yet Reviewed
$587.99
—
$685.99
An all-new addition to the Turbosmart lineup is the fresh air Gen-V (Anti-Lag Valve (ALV40) for motorsport applications. They feature a 40mm valve diameter, a purpose-designed actuator housing—and multiple fittings for ease of fitment and fabrication. The anti-lag valve allows for incoming charged fresh air from the turbo to be diverted safely into the exhaust manifold pre-turbine wheel. With the throttle at low opening angles, this allows for safer spooling of the turbocharger—without the potentially damaging throttle-based late combustion anti-lag that can induce high engine stresses and break connecting rods. The ALV is a sealed twin chamber design, with the top port being the primary control port. The spring is designed to open under vacuum conditions to allow for the air to bypass into the exhaust manifold; while the lower chamber is for twin port control methods—to control the valve irrespective of manifold pressure. The shaft seal allows for leak-proof operation.
Not Yet Reviewed
$529.95
Turbosmart internal wastegate actuators provide better turbo response and sensitivity, while managing boost pressure. They're packed with features that make them more convenient and reliable than other wastegate actuators. The Nomex-reinforced silicone diaphragm can withstand high temperatures associated with turbochargers without fear of failure. Their aluminum construction is strong and lightweight, while their stainless steel rod and clevis prevent corrosion under harsh elements. To top off these great little packages, Turbosmart designed a locking collar that allows for quick spring changes. Combine these internal wastegate actuators with Turbosmart's boost controller to really fine-tune your car's potential. Order the universal or application-specific model that best suits your vehicle.
( 6 )
$540.95
Clearance
Jaz Pro Sport fuel cells with fill valve and steel cap will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their lengthy list of sizes, shapes, and capacities is intended to meet your needs and wants perfectly. Jaz Pro Sport fuel cell features: * IMCA-approved * One -8 AN tipover valve vent fitting * Spring-loaded flapper for rollover protection* Large 4 in. diameter steel cap allows quick removal and easy filling
Not Yet Reviewed
$921.99
$512.99
—
$824.99
Jaz Pro Sport fuel cells with 45 degree flapper filler will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their long list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * 45 degree filler neck with spring-loaded flapper 4 1/4 in. high * Choice of 2 1/4 in. or 2 1/2 in. neck diameter * One -8 AN tipover valve vent fitting
( 5 )
$512.99
—
$824.99
Jaz Pro Sport fuel cells with 90 degree filler/flapper and cap equip your race car with quality, value, and most importantly--safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They are set up with one -8AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their long list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * Vented twist lock cap with spring-loaded flapper * One -8AN tip over valve vent fitting * 2 1/2 in. neck diameter with 2 in. height
Not Yet Reviewed
$500.99
—
$821.99
Jaz Pro Sport fuel cells with 90 degree quick filler/flapper neck will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their lengthy list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * Spring-loaded flapper with no cap for quick fill * One -8 AN tipover valve vent fitting * 2 1/2 in. neck diameter with 2 in. height
Not Yet Reviewed
$527.99
—
$824.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
