Availability
Rhodes Race Cars Elite Series anti-roll bars are available in 24 in. or 36 in. lengths. The tubes can be cut down to any desired length before welding in the splined billet shafts to the end of the tubing, which allows you to install them at any desired width for a customized fit for you ride. Kit features include: * Works great on cars up to 2500 hp and up to 3,200 lbs. * 2 in. diameter .250 in. wall 4130 tubing * 45-spline gun drilled shafts * 7075 billet aluminum splined arms * Self-aligning spherical bearings to eliminate binding * Steel bearing cups with snap rings for ease of mounting * Comes complete with mounting tabs, rod ends, and Grade 8 hardware
( 2 )
$699.95
—
$724.95
Rhodes Race Cars Elite Series HD anti-roll bars are available in 24 in. or 36 in. lengths. The tubes can be cut down to any desired length before welding in the splined billet shafts to the end of the tubing. This allows you to install them at any desired width for a customized fit for you ride. Kit features include: * Works great on cars up to 3500 hp and up to 3,200 lbs. * 2 in. diameter .250 in. wall 4130 tubing * 45-spline gun drilled shafts * 4130 billet aluminum splined arms * Self-aligning spherical bearings to eliminate binding * Steel bearing cups with snap rings for ease of mounting * Comes complete with mounting tabs, rod ends, and Grade 8 hardware
( 1 )
$724.95
—
$749.95
Control wheel stands and put more power into moving the car forward. Get Rhodes Race Cars Pro Series wheelie bars for your vehicle today. Features and benefits: * Upper tubes, lower main tubes, and lower cross bar are made from 1 1/4 in. diameter, .065 in. wall, 4130 chromoly tubing for the ultimate in strength * Lower diagonals (X-braces) are made from 1 1/8 in. diameter, .058 in. wall, chromoly tubing * Lower main tubes come with TIG-welded wheel brackets installed * Wheel brackets are made from 4130 chromoly with a second hole to raise the wheelie bar for additional ground clearance during loading and unloading * Designed to be 80 in. from center of the rear end housing to center of the wheelie bar wheel * Full X-brace design for the lower section * Comes complete with 4130 heavy-duty rod ends, push pull pins, steel wheels, and all hardware necessary (welding required) * Welded kits available with lower section completely welded * Welded kits have upper bars with one threaded bung welded in; the second bung must be welded in once height has been established
Not Yet Reviewed
$549.95
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 141 )
$509.95
—
$774.95
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
—
$599.95
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 4 )
$574.95
—
$599.95
Rhodes Race Cars rear end housing narrowing fixture kits allow you to "slim down" your rear end to get some additional clearance. Available with 60 in. or 72 in. lineup bar, each kit includes pinion centering plate, housing end outer pucks, and outer diameter inner pucks. Choose the kit preferred for your application.
( 1 )
$674.95
—
$699.95
When it comes to high-horsepower applications, Rhodes Race Cars fabricated Ford 9 in. housings are the only way to go. Available in 48 in. and 60 in. lengths, all the kits feature face plates with 3/8 in. press-in studs, billet aluminum fill caps, and drain fittings. Mild steel housings have 3 in. axle tubes; chromoly housings use 3 1/2 in. axle tubes. They are available with many different options--get one for your ride today. Un-welded kits require a rear end housing fixture (sold separately) to ensure proper axle alignment. Welded kits are available from mild to wild for a wide range of horsepower applications and feature: * Housing ends of your choice * 4-link or ladder bar brackets * Mild steel or chromoly back braces
( 17 )
$549.95
—
$789.95
Rhodes Race Cars Elite Series 4-link suspension kits are specifically designed to handle the extreme horsepower levels produced by today's Pro Stock/Pro Mod cars. Features and specs: * 1/4 in. 4130 chromoly Pro Series housing and chassis brackets * Housing brackets have integrated shock and wheelie bar mounts * Housing brackets are for 3 1/2 in. axle housing tubes * 1 1/2 in. O.D. .095 in. thick wall chromoly 4-link tubes * Four left and four right hand 3/4 in.-16 weld-in threaded bungs * Coilover shock mounting kit * 1/2 in. holes with 5/8 in. hole spacing for the ultimate in adjustability * NAS mounting hardware * Overall length is 18 in.
Not Yet Reviewed
$799.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
