Availability
Holley's high-mount base accessory drive kits have everything pulled up and in tighter than other options. The patent-pending accessory drive incorporates the timing cover, water pump, and alternator and can also be configured with A/C and/or P/S if desired. The systems are designed to work with the factory crank pulley, as well as aftermarket damper and pulleys. Accessory drive components in the system can be configured in several different ways. For example, there are alternator options offered for different performance and electrical demands. Also, deleting the A/C and/or P/S are options. These "base kits" supply all but the components with options. If you purchase a "Holley complete kit," all these options are already chosen for the most common, cost-effective combination. Features and benefits: * Fits Ford 7.3-liter Godzilla engine—ideal for engine swaps * Provides additional accessory clearance for swap applications that work with the factory rear sump oil pan * Allows for A/C and/or P/S delete and choice of alternator * Includes new front main seal and installation tool * Works with the original factory crank pulley, as well as aftermarket damper/pulleys * Alternator options do not require the original ECU control to function * P/S pump with the optional external reservoir is ideal for hydro-boost applications * Choose from natural "as-cast" or black finish on the timing cover
Not Yet Reviewed
$749.95
—
$799.95
On Sale
Holley EFI intake manifolds feature port-matched upper and lower runners for reduced restrictions. Plus, the EGR passages have been relocated to the outside of the manifold to allow for the use of larger intake ports. The result is greater air capacity, which makes these manifolds the perfect choice for supercharged engines. They're available in a variety of styles and options; select the model designed for your vehicle and/or engine application.
( 6 )
$620.95
$538.95
—
$649.95
On Sale
Holley Dominator billet fuel pumps feature a patent-pending twin-pump design. It allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost. By staging the second pump, you eliminate the unnecessary recirculation and heating of extra fuel, which can lead to poor performance and hot fuel issues. They can also be wired for full-time duty to get the maximum performance and are proven with an 18 V compatibility at pressures of up to 80 psi. At only 5.1 lbs., they weigh half a pound less than other 1,000 hp pumps, and yet they have twice the features. Features include: * Billet aluminum construction with anodized finish * -10 AN O-ring inlet/outlet for high flow and superior sealing * Excellent for use with carburetor or EFI applications * Compact for easy installation on frame rails or other tight spaces * Proven durability beyond 3,000 hours in gasoline or diesel fuels * Fully sealed, can be submersed if necessary
( 13 )
$626.95
$563.95
On Sale
Holley harmonic balancers are offered for a variety of internally or externally balanced applications; in versions for engines requiring weighted or non-weighted balancers. All are accurately balanced and carefully machined for correct fit. Holley harmonic balancers feature clear, white, easy-to-read timing marks against a painted black background.
( 1 )
$663.95
—
$749.95
On Sale
Holley cooling manifolds are designed for use with their mid-mount accessary drive systems. These aluminum manifolds are offered with a black, polished, raw, or satin finish. Keeping your vehicle cool is the key to maximum performance. Holley cooling manifolds will help dissipate some of that extra heat.
( 3 )
$624.95
—
$699.95
Holley Gen III Hemi timing covers are offered in two finishes for your mid-mount accessory drive system. Available for Hemi engines with or without VVT, these covers are the correct replacements for those originally supplied in your Holley complete accessory system. They will provide the perfect fit and expected performance to service your system. Choose the Gen III Hemi timing cover required for your setup.
Not Yet Reviewed
$518.95
—
$573.95
On Sale
Does your donor engine have a questionable water pump? Or, did you just discover after starting an engine swap that the accessories are interfering with things? Changing the belt alignment can help and, thankfully, Holley mechanical water pumps can get you there with ease. These pumps will fit a variety of applications and belt alignments—including the most popular and cost-effective truck engines. They're a budget-friendly option that will fit nicely under the hood. The water pumps even work with most truck accessories without changing out your entire accessory drive system to match their belt alignment. Holley Performance just keeps making swaps easier and easier! Order your OE replacement model, or the design and configuration that best suits your engine.
( 12 )
$624.95
On Sale
Holley universal 4-barrel 1000 cfm 4150 flange throttle bodies feature integrated throttle position, idle air control and intake air temperature sensors to work with your aftermarket multi-port EFI system. Their standard square bore mounting pattern is designed to fit perfectly on most intake manifolds and the stout 1,000 cfm can handle high horsepower with no problem. These units have a CFD computer-designed modeled air entry area--so maximum velocity and accelerated air speed are delivered to the engine. The high-flow idle air control passages are great for large cu. in. to aid in idle stability. Holley universal 4-barrel 1000 cfm 4150 flange throttle bodies have an integrated GM 700R4 transmission kickdown location, as well as a kickdown lever for use with Ford transmissions. They feature all necessary vacuum ports, one timed spark, two 3/8 in. and two 3/16 in. full manifold vacuum ports. The 1.750 in. diameter throttle plates are mounted to PTFE-coated throttle shafts for high flow and smooth feel. Their high-quality die cast aluminum construction provides excellent strength while reducing weight, and they're offered in your choice of tumble polish or hard gray anodized finishes.
( 16 )
$599.95
—
$749.95
$538.95
—
$673.95
On Sale
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$799.95
—
$849.95
$718.95
—
$763.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
—
$899.95
$584.95
—
$718.95
On Sale
Holley's EFI crank trigger kits provide accurate crank speed and position signals to Holley EFI systems in the most demanding, high-horsepower, racing applications. The crank position is measured every 10 degrees instead of every 45 degrees, like standard 4-magnet crank trigger systems. Holley's EFI crank trigger kits feature 1/4 in. thick, billet steel, 36-1 or 60-2 tooth-crank trigger wheels with black zinc oxide finish for superior corrosion resistance and striking good looks Other notable features include: * Crank wheels center off of balancer hubs, eliminating the need for centering rings * All billet, 6061-T6 aluminum sensor mounting brackets with "bright-dipped" black anodized finish and laser-etched Holley EFI logo * Custom 3-wire, ferrous-target, Hall-effect sensors with M12 x 1.0mm threads for finer gap adjustment * Grade 8 and mil-spec mounting hardware
( 6 )
$675.95
$583.95
—
$749.95
On Sale
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$649.95
$549.95
—
$583.95
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$573.95
$515.95
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$649.95
—
$749.95
$583.95
—
$673.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$1,049.95
$579.95
—
$749.95
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$777.95
$505.95
—
$699.95
On Sale
Holley LS extended-length main engine harnesses are 22 in. longer than previous harnesses. Designed to fit most 24x and 58x LS engines from 1997-2012, they are a perfect fit for installers wanting to mount any Holley EFI ECU inside of the passenger compartment where it is away from the elements, and easy to access, such as on a roll bar or under the passenger seat. Notes: * Plug-and-play with Dominator, HP, Terminator X, and Terminator X Max ECUs * LS1/6 harness interfaces with 24x crank and 1x cam sensors * LS2/3/7 harness interfaces with 58x crank and 4x cam sensors
( 1 )
$672.95
$604.95
On Sale
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$573.95
$515.95
—
$549.95
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
On Sale
Holley EFI speedometer gauges complement your other instruments with precision and style. Designed specifically for use with Holley EFI systems, they can also be used as a standalone unit—and are available in two sizes, in both black and white face versions. The gauges are compatible with all Holley EFI touch screens, dashes, hand-held tuners, and other CAN devices, making them great for Holley EFI users looking to install a combination of needle gauges and LCD accessories. Holley EFI speedometer additional details: * Wire directly into the vehicle's 16-pin OBDII data link connector * Operate by receiving data from the ECU through the OBDII data link connector * 0 to 160 mph range with multi-function LCD display, including mileage/trip odometer and peak speed recall * Slim-style mounting requires very little dash space for installation * 240 degree sweep pointer from 8 to 4 o'clock makes gauges easier to read at a glance * Internal microprocessor ensures accurate pointer movement in street and racing conditions * Spin-lock ring threads to back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum threaded bezels with anodized finish
( 2 )
$599.95
$538.95
On Sale
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$599.95
$538.95
On Sale
Holley EFI Gen III Hemi single plane intake manifolds provide maximum hood clearance combined with plenum and runner geometry that provides a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The isolated design of the air/fuel passages helps to increase charge air density and performance. Holley EFI Gen III Hemi single plane intake manifolds are great for turbocharger, centrifugal blower, or NOS power adders. Features: * Minimum carburetor flange height for maximum clearance to hood * 4150-type throttle/carb flange * Cast aluminum construction * Billet fuel rails * Billet aluminum oil fill cap * Mounting brackets for use with either Bosch EV1 or Gen III Hemi OEM fuel injectors * O-ring seals around ports * Natural or black finish available
( 2 )
$630.95
—
$649.95
$566.95
—
$583.95
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
$673.95
On Sale
The design of Holley Hi-Ram GM LT1 lower manifolds allows for easy disassembly to do custom porting, use multiple tops, or create custom induction systems. Each runner has a large radius where it meets the plenum, as well as an optimized taper and cross-sectional area to perform in a wide variety of engine configurations. The bases are available with or without port EFI provisions. Are you looking for the ultimate performance? Begin with Holley LT Modular Hi-Ram lower intake manifolds. Features include: * Modular design with removable top * Overall height: 13.34 in. with EFI top (95mm or 105mm) * Overall height: 12.10 in. with carb-style top (2 x 4150 or 2 x 4500) * Height at plenum flange: 9.44 in. * Port size: 2.06 in. high x 1.53 in. wide * Runner length: approximately 6.5 in. * Large plenum volume of 549 cu. in. with 1 x 95mm or 1 x 105mm throttle body top * Available with or without injector ports in the runners * Intakes with injector ports include fuel rails with dual mounting (1.48 in. or 2.56 in.) O-ring to O-ring injector length * Anodized fuel rails, laser-etched, and machined for -8 AN O-ring fittings * Rear of plenum machined for MAP and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum-to-runner entry on each runner * O-ring seals at cylinder heads and plenum top * Top-mounted screws on plenum top (all except front two screws) * Available top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies (all sold separately) * 3,500-8,000+ rpm power band
Not Yet Reviewed
$749.95
$673.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
