Availability
Showing In Stock Items. Show All 30 Items.
On Sale
MSD modified HEI dust covers allow you to remove the stock HEI coil in your distributor cap and replace it with an externally mounted coil. By going with an external coil, you increase the reliability and performance of the stock HEI system.
( 9 )
$79.09
$71.15
On Sale
Crown Automotive distributors deliver accurate trigger signals. When it's time to improve your ignition system, you can rely on Crown for quality direct-fit replacement parts. These distributors are constructed of cast aluminum housings and steel gears, magnetic or points-style triggers, and most have caps included. Hook one up to deliver the voltage from your coil to the spark plugs for reliable ignition!
( 18 )
$93.99
—
$109.99
$84.59
—
$98.99
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$65.75
—
$72.49
$59.15
—
$65.25
On Sale
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$57.49
—
$79.05
$51.75
—
$71.15
On Sale
These Extreme distributor caps from MSD are replacement covers designed to be installed on stock HEI distributor cams with no modifications.
( 8 )
$86.99
$78.25
On Sale
Holley distributor caps are the best way to help out your ignition. The compression-molded caps are stress-relieved immediately after molding-in special fixtures to help ensure dimensional stability.
( 3 )
$79.05
$71.15
On Sale
Mallory constructed these distributor caps from innovative, space-age plastic. Mallory distributor caps combine the high dielectric strength required for today's high-energy ignition systems with highly impact-resistant qualities to prevent damage.
( 104 )
$84.85
—
$118.95
$76.35
—
$77.95
On Sale
Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.
( 52 )
$55.65
—
$67.35
$50.08
—
$60.62
On Sale
ACCEL heavy-duty distributor cap and rotor kits offer superior protection from "arc-thru" and crossfire. These caps are stress-relieved at the molding to ensure stability and feature a 60k volt-rated alkyd molding compound. Corrosion-resistant brass inserts and steel rotor springs provide high-spark energy flow for the ACCEL heavy-duty distributor cap and rotor kit designed to fit your application.
( 44 )
$59.25
$53.35
On Sale
MSD Cap-A-Dapts have HEI-style posts, an adjustable rotor to allow proper phasing (Chevy and Mallory YL only), and wider post spacing to prevent crossfire and ionization. The kits include a high-quality cap with brass terminals, a rotor, and a cap spacer.
( 44 )
$86.99
—
$95.59
$78.25
—
$86.05
On Sale
Maximize your ignition performance with PerTronix marine distributor caps! These marine distributor caps are non-vented with specially designed stainless steel hardware. They are designed to meet or exceed OEM specifications for accurate, dependable performance.
( 3 )
$73.20
$65.88
On Sale
MSD Pro-Caps are larger than standard caps, to handle more voltage. Each terminal is spaced exactly 2 in. apart to deliver spark to the right plugs with less spark scatter. The caps are molded from DuPont Rynite for maximum strength, and the rotors feature thick vanes, deep skirts, and a dual screw-down rotor tip for long life. The Pro-Cap bases bolt on to most MSD distributors.
( 4 )
$99.95
—
$112.95
$89.95
—
$101.65
On Sale
Holley GM distributor wiring harness adapters are designed to connect the distributor to the Holley ECU. They fit all digital interactive Holley Pro-Jection and Commander 950 fuel injection systems. The harness adapters will allow the use of the ignition control feature that is part of the Holley ECU.
( 2 )
$59.25
$53.35
On Sale
These cap and rotor kits from MSD are replacements for the 44 amp Pro Mags, or the 12 amp band clamp models. The caps are molded form alkyd material and have excellent high-voltage characteristics. Brass spark plug style terminals are used for solid connections and a firm grip to the plug wire terminal. The rotors are injection-molded from Dupont Rynite, a strong glass-reinforced material. Tall vanes are molded on the top of the rotors to stir up the air, preventing ozone buildup and crossfire from occurring. A brass/stainless steel rotor tip is screwed into the rotor, ensuring a long life at high rpm.
( 3 )
$79.09
$71.15
On Sale
With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.
( 63 )
$79.55
—
$96.00
$71.60
—
$86.40
On Sale
When it's time for a tune-up, PerTronix offers quality distributor caps to replace your worn-out original. Why take chances with old, questionable, or faulty ignition components that can leave you stranded. PerTronix distributor caps are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's ignition system needs to PerTronix; order the model and options best suited for your vehicle.
( 35 )
$56.40
$50.76
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 131 )
$112.95
$101.65
On Sale
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$60.75
—
$102.90
$54.68
—
$92.61
On Sale
ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.
( 45 )
$75.95
$56.96
On Sale
Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.
( 42 )
$70.00
—
$96.00
$63.00
—
$86.40
On Sale
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 118 )
$55.65
—
$90.15
$50.08
—
$81.14
On Sale
MSD Circle Track ignition control modules will replace your stock 4-pin with the same powerful and reliable performance. These replacements are for use with MSD HEI distributors and will spark the energy to keep you going lap after lap. Make your Circle Track car's ignition "bulletproof" with control modules from MSD.
( 1 )
$86.99
$78.25
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 433 )
$79.09
$71.15
On Sale
Taylor High-Energy spark plug wire sets are an outstanding choice for replacement or a performance upgrade. These wires feature heat-resistant silicone jackets and boots, double spring-locking spark plug terminals for better gripping, an 8mm size for high-compression engines, and a resistor core to suppress radio interference. The spark plug wires can withstand temperatures of up to 500 degrees F—and they're available in a variety of options for distributor terminal and boot ends, assembled or not, and universal or direct-fit for specific applications.
( 222 )
$62.90
—
$65.75
$56.61
—
$59.18
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
