Availability
Showing In Stock Items. Show All 25 Items.
These Ford Performance Parts spark plug wire sets feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable).
( 701 )
$50.99
—
$92.99
On Sale
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$60.75
—
$121.45
$54.68
—
$109.30
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 51 )
$57.95
—
$106.95
Dragon Fire Street Series spark plug wire sets are specially designed to deliver higher performance over your factory OEM wires, while still maintaining the ability to be used as direct factory replacements. They feature a super-low-resistance conductor wrapped in a highly durable, double-layer EPDM/silicon sleeve. Using a high-dielectric strength copolymer compound, these wires eliminate voltage leaks and radio frequency interference (RFI). Get one of the best alternatives to higher priced wires for your vehicle with a specialized set of Dragon Fire 1000 Street Series spark plug wires. Features and specs: * OEM-style terminals * Full EMI/RFI suppression technology * 500 ohm resistance * 500 degrees F high-temperature silicon * OEM-style silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * OEM-style stainless steel conductors * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 39 )
$54.95
—
$129.95
On Sale
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 140 )
$64.60
—
$79.55
$58.14
—
$71.60
Summit Racing™ muscle car retro ignition wires offer an old-school look without sacrificing modern-day features. These 7mm wires have a low 300 ohm/ft. resistance and aramid inner core wrapped by a spiral-wound conductor for full spark delivery and excellent EMI suppression. A dielectric barrier prevents current leakage, and a braided fiberglass layer strengthens the wires, while maintaining flexibility. A crimp tool is included. The ignition wires are available with straight or angled spark plug boot ends and other options. Order the set designed for your classic 1960s or '70s application.
( 10 )
$53.99
—
$68.99
Dragon Fire Sport Series spark plug wire sets are designed to provide unsurpassed performance, making them one of the best wires available. They feature a super-low-resistance conductor wrapped in a highly durable, double-layer EPDM/silicon sleeve. Using a high-dielectric strength copolymer compound, these wires eliminate voltage leaks and radio frequency interference (RFI). Get one of the best alternatives to higher priced wires for your performance project with a specialized set of Dragon Fire 2000 Sport Series spark plug wires. Features and specs: * High-grade copper/stainless steel terminals * Full EMI/RFI suppression technology * 150 ohm low resistance * 600 degrees F-rated silicon * Silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * Spiral core alloy conductor technology * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 21 )
$60.95
—
$142.95
On Sale
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 118 )
$55.65
—
$112.45
$50.08
—
$101.20
Dragon Fire Race Series spark plug wire sets feature the perfect combination of ultra-high heat resistance and reliable high-voltage delivery to outperform and outlive most other wires. Their multi-layer construction and industry-leading, spiral-wound conductors provide maximum voltage transfer, regardless of your coil type. Make strong spark delivery one less worry when building your ultimate performance project with a specialized set of Dragon Fire 3000 Race Series spark plug wires. Features and specs: * Extra-strong high-grade copper/stainless steel terminals * Superior EMI/RFI suppression technology * 500 ohm ultra-low resistance * Extra-thick-walled German-made silicon boots and jacket (600 degrees F-rated) * Silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * PentaCore alloy conductor technology * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is perfectly crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 26 )
$59.95
—
$104.95
With a rating of 25 ohms per foot, FAST FireWire spark plug wires are a whopping 37 percent more efficient than the nearest competitor. These premium-grade, double-layer, silicone-insulated wires offer unsurpassed resistance to heat and damaging fluids and enhanced protection against high-voltage breakdown. They are also ideal for street use, as their KEVLAR®-reinforced "reactive core" design filters out RFI and EMI noise that affects sound systems. Additional features include: * Unique reactive-core engineered to deliver maximum spark-gap energy to your spark plugs with today's high-output competition ignitions * Filter out RFI and EMI (RFI/EMI pulsings confuse onboard engine control computers, audio systems, and other electronic devices) * Very low 25 ohm resistance ensures maximum spark-gap energy is delivered to the spark plugs * Complete, assembled, and ready to install!
( 12 )
$57.95
—
$97.95
On Sale
You'll get the most from your motorcycle with ACCEL SuperStock spark plug wire sets. These SuperStock wires from ACCEL have some of the same great features as the 300+ Series--a thick 8mm silicon jacket and insulation to eliminate electrical leakage and ultra-strong Aramid and fiberglass braiding to resist vibration and "wire stretch"--making for a very durable, reliable set of wires. The SuperStocks also offer a low 500 ohms/ft. resistance core that delivers maximum spark--up to five times more peak energy than the competitors, even under extreme temperatures. For great performance from your cycle, go with the winning technology of ACCEL.
( 1 )
$65.85
Stromberg E-Fire High Performance spark plug wires are designed for flathead Ford applications—whether you have a front mount (59A) or top mount (8BA) distributor. Designed to work with both electronic and points-style distributors, E-FIRE plug wires give you strong fire power with high-level RFI/EMI resistance. The spiral-wound, stainless steel suppression core is protected by tough fiberglass reinforcing braid for strength and flexibility. And the 100 percent silicone insulation resists high temperatures, moisture, oil and chemicals, and protects against arcing and voltage leaks. With low 500 Ohm/ft resistance, they get more energy into your plugs. With the Ford flathead engine firmly in mind, Stromberg designed the 90-degree cap terminals and boots to be pre-fitted for smarter 'distributor first' installation. This eliminates the difficult task of trimming front mount wires up close to the radiator where access is limited—and also leaves you free to use the supplied 90-degree spark plug boots or choose your own hot rod terminals. All leads are 7mm diameter, so they fit through your flathead plug wire looms or tubes. They're cut to length, too, with a long coil wire to reach your firewall.
( 3 )
$65.00
Edelbrock Max-Fire Ultra-Spark 500 spark plug wire sets offer performance and value to replace your OEM wires. They feature high-quality leads that deliver 500 ohms of EMI-RFI noise suppression with low resistance. Ultra-Spark 500 wires are built with superior cores—wrapped with a suppression material, conductive winding, and a layer of latex silicone. That is covered with inner insulation, braid tape, and an 8.5mm silicone outer jacket that won't crack or shrink, and resists chemicals. Why replace when you can upgrade? Treat your daily driver or budget build to Edelbrock Max-Fire Ultra-Spark 500 spark plug wire sets.
( 6 )
$61.95
—
$62.95
On Sale
Taylor's Pro Wire 8mm TCW core spark plug wire sets beat the competition, both in looks and performance. They're 100 percent pure silicone insulated with a fiberglass reinforced jacket. The TCW core conductor is designed for racing applications where RFI is not a concern and is an excellent choice for Magneto, point type, and non-electronic ignition applications. Available in four colors, these wires feature Taylor's exclusive low profile, 100 percent silicone Pro Boot with finger grips and vibration proof spring lock terminals, and are designed to withstand over 600 degrees F when underhood temperatures are high.
Not Yet Reviewed
$105.00
$94.50
On Sale
Mallory Pro Sidewinder spark plug wire sets are the company's most advanced wires. Their special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference—and at the same time allows the type of ignition system performance previously available only with Mallory Pro wires. The high-temperature silicone jackets can withstand more than 500 degrees F. Pro Sidewinders are available in ready-to-use sets cut for specific applications, or extra-long universal sets. Features: * Low 300 ohm resistance spiral core delivers high energy output for maximum spark at the plug * Great RFI suppression meets the demands of today's on-board electronics, such as electronic ignition, sound systems, and computer controls * 8mm ozone-resistant red silicone jacket repels water, oil, grease, and fuel—and withstands temperatures up to 500 degrees * Available in ready to install kits for various applications or universal V8 kits
( 33 )
$145.75
—
$167.45
$80.95
—
$92.95
Dragon Fire High Performance Series spark plug wire sets deliver industry-leading performance, quality craftsmanship, and long-term reliability. At the core of these wires is a strong Kevlar® center with a low-resistance spiral-wound alloy conductor, tightly wrapped for maximum spark energy transmission up to 80,000 VAC. A high dielectric strength co-polymer compound coating is applied to the conductor to help eliminate voltage leaks and Radio/Electromagnetic Frequency Interference (RFI/EMI). The conductor is fully insulated in a durable, extra-thick silicone and EPDM sleeve for superior protection. All terminals are protected by heavy-duty, extra-thick walled, high-temp silicone boots to ensure optimal spark delivery and long service life. Heat Rated to 600° F. Designed as a direct replacement set, these spark plug wires are heat-rated to 600 degrees F. Order the set recommended for fitment on your vehicle.
( 16 )
$59.95
On Sale
Outshine the competition in both looks and performance with Taylor Spiro-Pro universal spark plug wire sets. Order the model that's compatible with your engine application. Features include: * 100 percent silicone inner core and outer jacket * Spiro-wound core consists of highly conductive resistor conductor spiral with stainless steel wire, covered with a fluorocarbon conductive material * More firepower to the spark plugs than OEM resistor core wires, and up to 10 times less resistance than standard resistor core wires * Eliminate radio frequency interference (RFI) * Highest temperature-rated wire on the market (600 degrees F) without the need for additional sleeving * Taylor's exclusive low-profile, vibration-proof, 100 percent silicone Pro Boot with grips * Double spring-locking spark plug terminals * Choice of many vibrant colors
( 2 )
$66.30
—
$94.40
$59.67
—
$84.96
Allstar Performance universal spark plug wire sets feature a spiral-wound suppression core for low-resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. These universal length 8mm spiral core wire sets include a non-terminated end, ends, and boots for a build-to-length option.
Not Yet Reviewed
$56.99
On Sale
Slip on a set of PowerCables spark plug wires from JBA Performance Exhaust to up the game of your ride! These plug wires feature 100 percent silicone jackets and unique boot ends that are designed to offer maximum clearance, while withstanding severe wear and tear for a longer lifespan. Don't put old spark plug wires on your new fully equipped engine when you can add JBA Performance Exhaust PowerCables spark plug wires for better performance and the reliability you expect! Features and benefits: * Extra thick diameters * Ultra-low resistance design * Wire wound mag conductors * Custom tailored lengths with cylinder I.D. labels * Improved under hood appearance * Resistant to heat and abrasion * Improved performance through ignition system * Superior Electro Magnetic Interference (EMI) suppression
( 55 )
$73.20
—
$112.95
$65.88
—
$101.66
A leader in direct ignition technology, Denso developed the auto industry's first compact stick-type ignition coil. In the development of today's high-tech ignition systems, the automakers and Denso are full partners. That same expertise is put to use on all Denso coil-on-plug boots. Each boot is designed and optimized for its specific application, then continually improved by Denso's global engineering team for maximum performance. One key to effective combustion in today's low-emission, high-efficiency engines is consistent, high-energy ignition output. Denso coil-on-plug boots deliver it. Additional features and benefits of Denso coil-on-plug boots include: * Superior-quality components and materials ensure optimal performance * Tested and inspected to ensure high quality * Eliminates phantom misfires * Provides maximum available voltage under all operating conditions
Not Yet Reviewed
$69.99
—
$90.99
For street or race track use, ACCEL 8.8mm custom fit ignition wire sets will provide your motorcycle the ultimate in ignition wire performance. These ready-to-install custom fit wires provide better performance, both electrically and mechanically. ACCEL 8.8mm wires have an extra thick jackets covering strong fiberglass braids that covers a layer of premium silicone and all that covers high capacity conductors; either stainless steel alloy for conductivity and mechanical strength or carbon graphite for Harleys with electronic ignition to protect control modules. All 8.8mm custom fit wires employ factory installed positive locking stainless steel terminals with dielectric strength silicone boots on the plug end and high conductivity brass coil terminals on the coil end for an easy, secure, leak proof, weatherproof installation. Winning technology for your motorcycle from ACCEL.
Not Yet Reviewed
$52.69
On Sale
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 157 )
$71.60
$64.44
On Sale
ACCEL motorcycle 8mm S/S custom fit ignition wire sets feature extra-thick 8mm silicone jackets and silicon insulation to eliminate RFI interference that interrupts electronic ignitions. S/S wire can deliver up to five times more peak energy than "Screaming Eagle" wire sets and it can do so at high temperatures. The ultra-strong Aramid core and fiberglass braiding provide resistance to vibration and "wire stretch" for wire sets that are durable and reliable. S/S spark plug wire is available in custom fit sets that are preterminated and ready for a quick and easy installation. ACCEL motorcycle 8mm S/S custom fit ignition wire sets are recommended for use on all carbureted and fuel injected motorcycles and are available in 4 colors--blue, black, red, and yellow.
Not Yet Reviewed
$52.95
—
$65.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
