Availability
Showing In Stock Items. Show All 93 Items.
On Sale
Holley offers several coolant temperature sensors designed for use with their Pro-Jection, Sniper, and other fuel injection systems. They feature brass construction with 3/8 in. thread and will provide the ideal fit and function to monitor your engine's coolant temperature. Select the one designed for your system.
( 19 )
$51.75
On Sale
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$70.79
$63.75
FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners
Not Yet Reviewed
$89.00
On Sale
Keep track of temperature levels with AEM Electronics air inlet temperature sensor kits. They include an aluminum weld-in bung, connector plug, and flying lead and sensor to complete the installation. Monitoring engine functions can stop a problem early--pick up AEM Electronics air inlet temperature sensor kits for trouble-free performance.
( 8 )
$67.55
—
$70.79
$60.75
—
$63.75
Haltech offers replacement coolant temperature sensors for a variety of applications. They're available in different thread configurations: Model 010300 includes: Matching Delphi plug and pins Model 010302 includes: Matching Delphi plug and pins Model 010304 includes: Matching male Deutsch DTM-2 connector
( 1 )
$52.00
FuelTech's temperature sensors are engineered to provide accurate, real-time data for high-performance automotive and racing applications. The benefits of the FuelTech's temperature sensors stem from their durability, precision, and seamless integration with FuelTech's engine management systems (ECUs). By monitoring the temperature of the intake air and fuel, the ECU can make fine-tuned adjustments to fuel delivery and ignition timing to ensure a consistent air-fuel mixture for maximum power and efficiency.
Not Yet Reviewed
$69.00
Griffin radiator coolant temperature sensors are the replacements needed for your Griffin fan wiring kit. These parts are made from factory materials and specifications to ensure proper fitment and performance. Don't take a chance of potential overheating; replace your aging sensor with the perfect fit of a Griffin radiator coolant temperature sensor.
( 4 )
$52.00
Haltech offers a wide range of automotive parts to service or maintain your vehicle. These replacement air temperature sensors are designed to fit and perform just like the originals. They're available in a variety of fitting styles and sizes for both universal and model-specific applications.
Not Yet Reviewed
$52.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement fuel level sender signal conditioners include a matching set of Deutsch DTM 4 connectors. They're used to filter the fuel level signal voltage from the fuel sender and improve accuracy.
Not Yet Reviewed
$88.00
Lowdoller Motorsports intake air temperature sensor thermocouples measure the temperature of air entering an engine to provide data to the Engine Control Unit (ECU), which uses the information to optimize air-fuel mixtures, ignition timing, and overall engine performance. This real-time data can help prevent engine damage by preventing issues like pre-ignition and knocking, ensuring improved fuel efficiency, reduced emissions, and smoother operation. Compared to standard thermistor IAT sensors, Lowdoller air intake temperature sensor thermocouples offer greater accuracy and a faster time response for their specific application, while also freeing up an ECU's analog input for other uses, though they do require a specialized amplifier and wiring, which are sold separately.
Not Yet Reviewed
$99.50
Edelbrock Pro-Flo EFI replacement intake air temperature sensors are available for their Pro-Flo and Pro-Flo XT EFI systems. When it comes to components to keep your EFI system working smoothly, Edelbrock has you covered.
( 2 )
$58.95
Thermocouple sensors are typically used to measure exhaust gas, manifold, turbo, or oil temperatures. Haltech open tip thermocouples have a working range of 32 to 2,012 degrees F (0 to 1,100 degrees C) and are available in a wide range of lengths from 24 in. (0.61m) to 96 in. (2.44m). All Haltech thermocouples are terminated with a K-type connector which then plug directly into a Haltech TCA box (TCA 2 or 4 thermocouple amplifier required). Choose the length you need.
Not Yet Reviewed
$98.00
Lowdoller universal EGT probes allow for real-time monitoring of exhaust gas temperatures. They offer the same benefits as other high-quality Exhaust Gas Temperature (EGT) sensors for performance tuning and diagnostics, with an emphasis on durability, accuracy, and reliability. The probes feature an Inconel sheath and a stainless steel overbraid on the wire leads, which provides abrasion resistance and protection against extreme heat. They are compatible with most aftermarket ECUs and data logging systems, plus, they are designed to fit a wide range of exhaust systems.
Not Yet Reviewed
$68.00
Lowdoller Motorsports cylinder head temperature sensor thermocouples are designed for faster temperature readings and improved accuracy, which is crucial for engine control systems to adjust fuel and ignition timing effectively. They feature an enhanced construction with heavy-duty ring and a K-type mini plug with metal strain relief to withstand the high vibrations and extreme temperatures of an engine bay. By providing accurate real-time readings, these CHT sensor thermocouples offer improved engine protection against overheating and potential damage, protecting critical components.
Not Yet Reviewed
$87.50
Engine knock is one of the most unwelcome problems to plague a vehicle. When your ignition timing becomes faulty, the results are felt unless corrected through a sensor. Chevrolet Performance knock sensor wiring harnesses should be used when replacing those key sensors, providing fresh OEM wiring and grommets. The harness units are available for over a hundred submodels from makers such as Chevrolet, GMC, Cadillac, Pontiac, Buick, and Hummer.
( 33 )
$64.99
On Sale
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
$97.19
ZEX has taken their patented TPS activation circuit and placed it in easy-to-install, stand-alone units. These programmable TPS switches allow anyone with a non-ZEX nitrous system to enjoy the benefits of using their throttle position sensor to reliably activate their nitrous system at wide-open throttle.
( 4 )
$104.95
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$50.99
—
$145.99
On Sale
Clearance
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$121.99
$50.39
—
$109.79
Canton Racing Accusump electric pressure control valve kits are available for discharge/refill in different psi ranges to suit your needs. These valves have the convenience of an electric valve for remote-mounted units and the rapid refill rate of a manual valve as required in racing. The electric pressure control valving will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level, and only refills when the pressure rises above that level. Each kit comes with a regulator, electric valve, wire, toggle switch, pipe nipple, terminals, and instructions.
( 9 )
$98.00
On Sale
Aeromotive VaporWorx fuel pressure sensors are exclusively for use with all VaporWorx PWM (Pulse Width Modification) kits that require a fuel pressure sensor. Efficient energy management is one of the main goals in the automotive industry, regulating actuators by (PWM), which is a widespread means of improving efficiency. PWM fuel pressure sensors are used to precisely control the speed of a fuel pump by rapidly turning the power on and off in varying durations, allowing the engine to receive the exact amount of fuel needed based on driving conditions. This ultimately improves fuel efficiency and reduces unnecessary wear on the pump by only running it at full power when required; essentially acting like a "throttle" for the fuel pump. Select the sensor for your application. Key points of PWM fuel pressure sensors: * Dynamic fuel pressure control—unlike traditional systems, PWM allows the fuel pressure to adjust rapidly depending on engine load, throttle position, and other factors, ensuring optimal fuel delivery at all times * Reduced power consumption—by only running the fuel pump at the necessary speed, PWM significantly reduces the power draw from the battery, improving fuel economy * Lower noise levels—operating the fuel pump at variable speeds with PWM helps minimize noise generated by the pump * Returnless fuel systems—PWM is often used in modern "returnless" fuel systems, where the excess fuel is not returned to the tank, simplifying fuel system design How it works: -- Signal from the ECU: The engine control unit (ECU) sends a PWM signal to the fuel pump controller, which determines the duty cycle (the ratio of "on" time to "off" time) based on engine conditions -- Pump speed control: The controller uses the PWM signal to rapidly switch the power to the fuel pump, effectively adjusting its speed -- Feedback loop: A fuel pressure sensor monitors the actual fuel pressure and sends this information back to the ECU, allowing for fine-tuning of the PWM signal to maintain desired pressure
Not Yet Reviewed
$68.95
$62.06
The accelerator pedal sensor measures the position of the pedal and transmits this data to the control unit for setting the throttle elements or to the injection system. The advantage of this approach is that these parameters can be used to prevent wear on the clutch and drivetrain and to reduce CO2 emissions. Hella accelerator pedal sensors maintain safe, smooth operation for your vehicle, and they are high-quality replacements with availability for many European manufacturers. Available for automatic and manual transmissions; choose the pedal sensor needed for your vehicle.
Not Yet Reviewed
$57.99
—
$96.99
On Sale
Crown Automotive throttle position sensors restore proper idle, rpm, and fuel efficiency. Choose between a variety of TPS styles and fitments to ensure your vehicle's top performance. These economical units are available for numerous models. For quality, efficiency, and a perfect fit, order your replacement throttle position sensors from Crown.
( 3 )
$55.99
—
$76.99
$50.39
—
$69.29
If you're looking to top off the hydraulic brake assist unit in your classic Chevy C10 pickup or just looking to upgrade your existing unit, Classic Performance hydraulic brake accumulator covers are the perfect solution. These brake accumulator covers will replace your existing one currently on your unit or it can be added to a Classic Performance Products' bare unit to assist in completing one from scratch. Available in a selection of finish options, chrome, black, or aluminum, these brake accumulator covers are easy to install to get your truck rolling as quickly as possible. Order the cover in the finish you'd prefer for your hydraulic brake assist unit upgrade.
Not Yet Reviewed
$58.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
