$20 Off $250 / $40 Off $500 / $80 Off $1,000 - Use Promo Code: DEALS

$20 Off $250 / $40 Off $500 / $80 Off $1,000
Use Promo Code: DEALS

It's the Season for Savings - Shop Holiday Deals Now!

28 Results Found For "low"

Part Groups

Results 1 - 24 of 28

MSD Adjustable Low RPM Modules

MSD adjustable low-rpm modules allow you to select any rpm between 1,000 and 3,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using the MSD 2-step module to leave the starting line below 3,000 rpm. They plug directly into the rpm module receptacle on the 2-step module selector, and can also be used on MSD's Soft Touch rev controls, rpm-activated switch, and shift light.

4.38 out of 5 stars ( 8 )

$52.69

On Sale

PerTronix Flame-Thrower III Ignition Coils

PerTronix Flame-Thrower III ignition coils were developed for use with the new Ignitor III electronics. They feature an ultra-low resistance of 0.32 ohms with 45,000 V. The coils are engineered to charge to peak current typically 30-70 percent faster than other ignition coils. This means that maximum spark energy is sustained to higher engine RPM. The economical units are available in a black or chrome finish.

4.49 out of 5 stars ( 119 )

$64.15

$75.85


$57.74

$68.26

MSD Blaster High-Vibration Ignition Coils

For off-road, marine, racing, or other extreme environments, MSD Blaster high-vibration ignition coils are the best choice. Their sturdy metal housing is potted with a premium-grade epoxy to completely encase the coils' primary and secondary windings. This protects the coils from high and low frequency vibrations. Alkyd material is used to form the spark tower because of its high dielectric characteristics. For your convenience, a standard canister-type coil mount can be used, and the coils can be mounted in any position.

4.61 out of 5 stars ( 147 )

$65.35

On Sale

PerTronix Flame-Thrower II Ignition Coils

Upgrade from your stock coil to more powerful PerTronix Flame-Thrower II coils. Designed for use with PerTronix's own Ignitor II® ignition systems, these 0.6 ohm coils deliver more than 45,000 V to your plugs for fuller, more complete combustion. Most have oil-filled canisters to keep the low-resistance windings secure and cool for reliable long-term performance. But there also are epoxy-filled versions for when vibration protection is needed. The Flame-Thrower IIs are available in chrome or black (epoxy, black only) and are not for use with original Ignitor ignition systems.

4.81 out of 5 stars ( 284 )

$63.10

$71.05


$56.79

$63.94

On Sale

PerTronix Flame-Thrower Ignition Coils

PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.

4.77 out of 5 stars ( 519 )

$55.65

$78.50


$50.08

$70.65

Davis Unified Ignition Dyna-Modules

Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.

4.66 out of 5 stars ( 127 )

$64.99

$89.99

On Sale

MSD Distributor Rotors

MSD distributor rotors are molded from high-quality, voltage-insulating Rynite or alkyd materials to resist carbon tracking, while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage-carrying capabilities, the rotor tips are made from low-resistance brass.

4.73 out of 5 stars ( 151 )

$55.85

$72.49

MSD Replacement Distributor Caps

Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .

4.6 out of 5 stars ( 197 )

$52.69

$104.95

Summit Racing™ GM HEI Ignition Tune-Up Kits

These Summit Racing™ GM HEI ignition tune-up kits offer an affordable way to bring your stock GM HEI distributor back to life. They include the following components: * High-power 50,000 V HEI coil * Distributor cap and rotor * Coil dust cover * Low-saturation ignition control module * Adjustable vacuum advance unit * HEI bushing (between the coil and cap) * Wiring harness and capacitor * High performance advance spring and weight set * Mounting hardware

4.54 out of 5 stars ( 165 )

$82.99

$83.99

On Sale

ACCEL SuperStock Ignition Coils

ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.

4.86 out of 5 stars ( 93 )

$51.75

$79.09

Denso Ignition Coils

Denso developed the auto industry's first compact stick-type ignition coil. The space-saving design of Denso ignition coils requires no high-tension ignition cables, fitting neatly into the engine's spark plug bore. Along with its stick coil technology, other advanced features include micro-sized driver circuits and diagonal inductive windings. That same expertise is put to use on all Denso ignition coils regardless of their configuration. Each Denso ignition coil is designed and optimized for its specific application, then continually improved by Denso's global engineering team. One key to effective combustion in today's low-emission, high-efficiency engines is consistent, high-energy ignition output. Denso direct ignition coils deliver it. Additional features and benefits of Denso ignition coils include: * Integrated driving circuit in the top of the coil * Superior-quality components and materials ensure optimal performance * Tested and inspected to ensure high quality * Diagonal windings eliminate sectioned bobbins, reducing size and weight * Improved coil efficiency lessens the need to generate high voltage * Eliminates phantom misfires * Small in size, light in weight, and easy to install * Provides maximum available voltage under all operating conditions

4.91 out of 5 stars ( 93 )

$50.99

$103.99

Proform Race HEI Distributors

Proform's Race HEI distributors are the real deal. They're designed to meet the high-performance demands of racing and keep on ticking. The distributors are built with 100 percent new parts, including the housing for guaranteed durability. They come in your choice of polished or unpolished aluminum housings, and four different cap colors. This distributors produce a 50,000 V spark through 7,500 rpm, for an enormous increase over OE HEIs. Also included are a 50 V coil, true spark alignment for instantaneous response, a high-performance curve, a premium cap with brass terminals, and a low-saturation ignition module.

4.57 out of 5 stars ( 82 )

$100.99

$108.99

On Sale

Holley EFI Gen III Hemi Smart Coils

Holley EFI Smart Coils are a bolt-in ignition upgrade for your Gen III HEMI or Coyote engine. Here's the difference over a stock coil: they produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. The Smart Coils are available individually and in sets of 8. * For Hemi combinations currently using Holley EFI or Terminator X, use Smart Coil Ignition Harnesses 558-312 and Coil Extension Harnesses 558-326 for a plug-and-play solution. Features: * Direct bolt-on to factory valve covers * Same wiring pinout as other IGN-1A coils for easy plug-in upgrades (Will not work with factory wiring) * More spark energy than any other smart coil on the market for maximum fuel burn during combustion sequence * Low current draw means less demand on the electrical and charging system * Built-in ignitor for compatibility with Holley EFI and many other aftermarket ECUs * Maximum operating voltage of 18 V—for compatibility with both 12 V and 16 V electrical systems found in many performance/race applications

Not Yet Reviewed

$106.95


$58.95

Summit Racing™ Volt Max X-TREME Spark Plug Wire/Cap and Rotor Kits

Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.

4.69 out of 5 stars ( 152 )

$53.98

$112.98

FAST PS60 Ignition Coils

PS60 performance ignition coils feature FAST's special E-core design, which loses less voltage, so more spark gets to your plugs. They have special low-resistance windings and are designed for extended use such as oval track, road racing, off-road, and high-rpm street engines. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high-rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.

5.0 out of 5 stars ( 1 )

$69.95

Proform GM HEI Distributor Tuneup Kits

Breathe some new life into your GM HEI distributor with one of these Proform GM HEI distributor tuneup kits. They include everything you need. Features include: * 50,000 V coil * "No-arc" rotor * Coil dust cover * Low-saturation module * Adjustable vacuum advance unit * HEI bushing * Wiring harness and capacitor * High performance advance springs and weights * All necessary mounting hardware

4.7 out of 5 stars ( 23 )

$89.99

$107.99

Summit Racing™ HEI Upgrade Kits

We know you want to get the most out of your ride, so your parts can't just perform--they've got to look good, too. That's why we've manufactured these Summit Racing™ HEI upgrade kits, which feature color-matched components--an industry first! They include an alkyd distributor cap with brass terminal connections, a rotor, a matching coil cover, a cable retention ring, and a high-performance, low-resistance, carbon-to-coil rotor conductor.

4.42 out of 5 stars ( 26 )

$59.99

$74.99

On Sale

ACCEL Truck Super Tune-Up Kits

ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.

4.63 out of 5 stars ( 178 )

$117.95

FAST PS50 Ignition Coils

FAST PS50 ignition coils offer high performance to replace your OEM coils. They feature special low-resistance windings, higher output, and are capable of high-rpm operation, plus they're compatible with all OE electronic ignitions. The windings of these FAST PS50 coils are computer-designed for superior spark gap current. They are oil-filled for maximum cooling and have alkyd coil towers to eliminate failure from flash-over and carbon tracking. Get firepower for oval track, road race, off-road, and higher rpm street engines with FAST PS50 ignition coils.

Not Yet Reviewed

$69.95

Sierra Marine Ignition Coils

Sierra Marine offers a variety of ignition coils to maximize your engines output. All Sierra ignition coils are engineered and quality-built to give you the most reliable coil possible. The low-resistance provides a higher output, helping your marine engine make the most of every spark. Order the Sierra Marine ignition coil that is best suited to fit your application requirements.

5.0 out of 5 stars ( 2 )

$51.99

$98.99

Denso Coil on Plug Boots

A leader in direct ignition technology, Denso developed the auto industry's first compact stick-type ignition coil. In the development of today's high-tech ignition systems, the automakers and Denso are full partners. That same expertise is put to use on all Denso coil-on-plug boots. Each boot is designed and optimized for its specific application, then continually improved by Denso's global engineering team for maximum performance. One key to effective combustion in today's low-emission, high-efficiency engines is consistent, high-energy ignition output. Denso coil-on-plug boots deliver it. Additional features and benefits of Denso coil-on-plug boots include: * Superior-quality components and materials ensure optimal performance * Tested and inspected to ensure high quality * Eliminates phantom misfires * Provides maximum available voltage under all operating conditions

Not Yet Reviewed

$51.99

$108.99

Astemo Ignition Control Modules

The most important part of the ignition system, Astemo ignition control modules meet all OE specifications regarding to voltage output, response times, and compactness. Utilizing proper turns ratio, low-resistance copper wiring, and temperature-resistant epoxy, Astemo igniters efficiently convert the 12 V power coming from your vehicle's battery to 20 kV or more, depending on the application. Being able to amplify the power in a quick and efficient manner allows the engine to operate more effectively, reducing emissions, increasing fuel economy, and increasing power. Choose the ignition igniter designed for your vehicle.

Not Yet Reviewed

$60.99

Twin Power Ignition Coils

If you want to increase peak spark voltage on your Harley-Davidson® by 20 percent or more, you need Twin Power ignition coils. These coils have a late OEM-style molded case and are high-quality, high-voltage replacements. They're designed for 12 V Harley® ignition systems—and will improve starting, prevent high-speed misfires, and increase mileage and performance. Twin Power ignition coils may come in OEM-style cases, but it's what's inside that counts.

5.0 out of 5 stars ( 1 )

$69.79

$103.74

Twin Power High Performance Coils

When you're running high rpm, you need parts like Twin Power high performance coils that are built to keep up with you. They use special heat-resistant construction, molded epoxy coils, and deliver 35,000 V per outlet. They're for 12 V H-D ignition systems and will improve starting, stop high-speed misfires, and increase mileage and performance. If heat from high rpm has your coil seeing red, replace it with Twin Power high performance coils.

Not Yet Reviewed

$78.52

Modal Header