Availability
Showing In Stock Items. Show All 89 Items.
Holley billet throttle return spring brackets are designed for use with several models of carburetors (not for use with Sniper EFI models) and feature clear or black anodized finishes. These are brackets with no throttle cable or kick-down mounts. Order the Holley billet throttle return spring brackets that best fits your application.
( 20 )
$90.79
—
$96.89
These Quick Fuel throttle return spring kits can solve all of your linkage problems. Designed and built rugged enough for competition use, they're manufactured from steel and are silver zinc plated for durability. Quick Fuel throttle return spring kits include dual stainless steel return springs, all mounting hardware, and complete installation instructions.
( 14 )
$69.99
—
$79.99
These Allstar Performance throttle return spring brackets can be used with a cable or mechanical linkage. They are designed to fasten to the carburetor studs and include dual stainless steel return springs, which are adjustable for tension. The brackets feature a specially design return spring that attaches to the carburetor for a simplified installation and smooth operation. The Allstar Performance throttle return spring brackets are manufactured from billet aluminum and offer a low-profile design that will clear most air cleaner assemblies.
( 27 )
$54.69
Willy's Carburetor & Dyno Shop throttle and return spring kits service your carburetor. They feature two throttle return springs on the primary throttle shaft and one throttle return spring for the secondary shaft—all are relocated for air cleaner clearance. The steel bracket features a built-in adjustable throttle stop and is powdercoated in a gloss black for added durability and lasting good looks. Maintain your carburetor performance with a throttle and return kit from Willy's.
( 4 )
$56.99
What's your boost level? Turbosmart wastegate springs are color-coded for the psi and diameter that you need to obtain your boost range. They offer inner, middle, and outer springs for all of their external wastegates. So, set the boost you want to run with springs specifically designed for your wastegates--Turbosmart wastegate springs.
( 13 )
$80.95
Moroso throttle return spring kits can solve all of your linkage problems. Designed and built rugged enough for competition use, they're made of 14-gauge steel and are chrome plated for hot looks. The kits include heavy and light sets of stainless steel return springs, all mounting hardware, and complete installation instructions.
( 47 )
$53.11
—
$57.99
Designed for Rochester Tri-Power setups, these Lokar Midnight series Tri-Power throttle cable bracket and spring kits include stainless steel throttle cable brackets and springs. The black stainless brackets mount under the rear carb on your Rochester 3-2 setup. Their black powdercoated stainless brackets and dual stainless springs are used to mount Lokar's throttle cable and kickdown assemblies.
( 1 )
$87.95
Allstar Performance adjustable throttle brackets with return springs will securely mount your throttle cable and hold it in place. These assemblies are offered in a choice of attractive finishes for a variety of carb sizes and cable styles. They feature a specially designed return spring mount that attaches to the carburetor for an easy installation and smooth operation.
( 51 )
$94.99
—
$99.99
AED billet throttle linkage and spring brackets shine with cool, customized looks and perfect performance under your hood. These combination linkage and spring brackets offer CNC-machined billet aluminum linkage plates in four anodized finishes. They not only provide you with strength and durability, but they also allow you to customize and enhance your engine compartment. AED billet throttle linkage and spring brackets are designed for Holley and AED carburetors, include all hardware (no additional parts are needed), and pass spring retention requirements for all sanctioning bodies. Impressive looks and superb performance at a small price--that's the AED advantage.
( 85 )
$74.99
—
$89.99
Designed for Rochester Tri-Power setups, these kits include stainless steel throttle cable brackets and springs. The stainless brackets mount under the rear carb on your Rochester 3-2 setup. Cables operate from the carburetor. These stainless brackets and dual stainless springs are used to mount Lokar's throttle cable and kickdown assemblies.
( 7 )
$64.95
—
$87.95
Summit Racing™ 50MM blow-off valves are a pressure release system that takes the load off your turbocharger when the throttle is suddenly closed, preventing damage to both the turbo and your engine. These valves are adjustable from 0 to 50 psi, making them ideal for most boosted applications. Machined from aluminum and black anodized for durability, these blow-off valves offer a quality look for any turbo setup. They include vacuum fittings, aluminum weld flange, V-band assembly, and springs.
( 14 )
$69.99
Summit Racing™ mechanical wastegates are constructed of cast stainless steel and 6061 aluminum with a black anodized finish. These valves control the flow of exhaust gases to the turbine wheel in a turbocharged engine system. Their primary function is to regulate the maximum boost pressure in turbocharger systems, to protect the engine and the turbocharger. Order the relief diameter preferred for your application.
( 28 )
$100.99
—
$109.99
Edelbrock AVS2 Series carburetor calibration kits contain all the necessary metering rods and jets that will allow you to adjust your AVS2 carburetor—either richer or leaner for both cruising and power modes. Several kits are offered, each consisting of an assortment of jets, step-up springs, metering rods, retaining springs, replacement hairpin springs, and a calibration chart that tells which rod/jet combination to use for your carburetor model. A handy reusable storage case is included to hold kit contents. Order the kit recommended for your carb application.
( 72 )
$82.95
—
$90.95
Holley carburetor accelerator pump conversion kits offer instantaneous response to pull strongly through the rpm band! A must for tunnel ram setups, these kits are ideal for those who demand ultimate performance from their Holley carbs. These kits increase fuel capacity and eliminate flat spots off idle, or at any other rpm range. These kits include everything required for an easy installation including a new pump housing, stud, arm, diaphragm, spring, and longer pump housing screws.
( 48 )
$90.39
These Summit Racing™ vacuum secondary upgrade Pro Packs can help you modify your carburetor's initial operating and full end rpm. They include an assortment of vacuum secondary springs, so you can choose which is best for your engine combination. They also include a quick-change housing and cover that allow you to make fast changes in no time at all. Optimize your engine rpm and tune-in your carburetor with one of these Summit Racing™ vacuum secondary upgrade Pro Packs.
( 20 )
$61.92
Philadelphia Racing Products throttle bracket assemblies hold your throttle cable securely—and with style. CNC-machined from 6061 billet aluminum, the brackets come furnished with a specially designed carburetor return spring mount. The mount attaches to your carburetor base for a clean installation. Brackets are machined to tight tolerances for smooth operation and precise adjustability, and each bracket is equipped with an adjustable cable end. Throttle brackets are available with and without return springs. They are designed for a variety of carburetor models and cable style applications.
( 4 )
$56.99
—
$81.99
Restore the performance of your high-mileage fuel pressure regulator with these genuine Holley diaphragm repair kits. You'll regain the accuracy and performance of the regulator from when it was new.
( 65 )
$56.19
—
$59.95
The right brackets for the right performance--Vortech accessory tensioner mounting brackets. Belt tensioners are an important component in the operation of your supercharger drive system. And, bent or misaligned mounting brackets may be the culprits for abnormal belt tracking on your tensioner pulley. Get the proper fit and function, plus avoid problems and poor performance with Vortech accessory tensioner mounting brackets.
( 5 )
$99.99
Our Summit Racing™ billet aluminum throttle cable brackets solve common installation headaches, look good doing it, and won't break the bank. The billet throttle cable brackets fit Summit M2008 series carburetors as well as Holley 4150 and 4160 series carburetors, mount to the carburetor base, and include a return spring and installation hardware.
( 145 )
$71.99
—
$77.99
Holley adjustable fuel injection regulators are able to provide all of the fuel pressure that your high performance, fuel injected vehicle will require. They utilize a special wave spring to maintain constant fuel pressure. Some models are universal fit, while others are designed for specific vehicle applications. The regulators are available for inline or fuel rail mount, with various psi ranges. Select the adjustable unit tailored to your driving needs.
( 43 )
$97.15
—
$99.95
Trick Flow® makes your carb installation look clean and professional. Installation is easy--just attach these brackets to the base of your carburetor. All of the hardware that you need is included, along with a return spring. The brackets are compatible with most carburetor designs and transmission kickdown cables (except Dominators).
( 92 )
$96.99
—
$113.99
Carter marine mechanical fuel pumps are 100 percent factory-tested and approved to deliver OE fit, form, and function with easy installation. Designed to resist corrosion and operate efficiently, they have heavy-duty diaphragms, high-speed "anti-float" springs, large "full flow" valves, lightweight aluminum castings, and tough, heat-treated levers. Where applicable, a vent tube to the carburetor is included. Available for many popular marine applications, Carter marine fuel pumps will keep your boat on the water and running strong.
( 157 )
$59.99
—
$83.99
When you need powerful and dependable fuel flow, look for it from Carter. These Carter Strip Super mechanical fuel pumps flow 120 gph from 6.9 to 9.5 psi. They contain heavy-duty diaphragms, high-speed "anti-float" springs, large "full flow" valves, and lightweight all-aluminum castings. As with all Carter fuel pumps, they feature a tough, heat-treated lever. The pumps are available in your choice of natural or polished finishes.
( 92 )
$82.99
Stromberg carburetor rebuild kits are the real deal. Designed and manufactured to the highest quality, these premium service kits offer great value and authentic service parts for your Stromberg carburetor rebuild. These carburetor kits are available for your Stromberg 97, 48, 40, and 81 to keep them operating at peak performance. Kits include: * Full gasket kit * No-stick S-jet inlet valve * Accelerator pump check valve * 2 idle mixture screws and springs * Full accelerator pump kit * Installation sheet * Float gauge
( 16 )
$52.95
—
$58.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
