Availability
Vortech supercharger oil feed fittings will mount into the supercharger head unit and allow the oil to enter the case. They are manufactured from high-quality brass material and are designed to fit all Vortech centrifugal-style superchargers.
( 8 )
$91.99
Lingenfelter regulator plugs are designed to block off the internal fuel pressure regulator in the driver's side fuel tank when converting to an external fuel pressure regulator. These fittings are required to install an external fuel pressure regulator when your fuel system will run at reduced fuel pressures below 54 psi. They're also needed when your fuel system will be running the stock 58 psi fuel pressure but you're converting to a vacuum referenced regulator. The vacuum referenced system will drop below 54 psi of fuel pressure at idle, cruising, or under deceleration. When the fuel pressure drops below 54 psi, the transfer pump from the passenger side tank will no longer correctly function and will fail to transfer fuel. This situation will reduce the vehicle range and fuel system capacity. Since this transferred fuel also helps keep the canister full in the driver side tank, it may also cause the vehicle to lose fuel pressure under high power conditions. Order the block-off plug recommended for your vehicle. Additional notes: * Lingenfelter fuel pressure regulator block-off plugs are precision CNC-machined from aluminum and then anodized blue for added durability * General Motors switched the C5 Corvette fuel systems over to the C6 Corvette fuel system design halfway through the 2003 model year. Corvettes with the last 6 digits of the VIN being 114930 or higher were produced November 25, 2002 and later and have the new C6 style fuel system * These regulator block-offs should be used in conjunction with the Lingenfelter passenger side fuel tank block-off fitting
Not Yet Reviewed
$58.85
S&G Tool Aid fuel injection test adapter fittings are made to work with their fuel pressure tester kits to diagnose low fuel pressure, a faulty regulator, leaking injectors, clogged or damaged fuel filters, or fuel leaks. When your vehicle is not running right, the correct diagnostic tool can help to quickly find the source of the problem and help you avoid the added time and expense of tracking down the problem. These fuel injection tester adapters by S&G Aid can help you diagnose issues before they become a problem.
( 1 )
$50.99
Moeller Marine threaded flexible fuel tank pick-ups feature both 3/8 in. NPT and 1/4 in. NPT for barb, as well as an internal flexible spring. Moeller offers two lengths, 22 in. and 36 in. For all your watercraft fuel line and tank connection needs, depend on quality Moeller replacement parts.
Not Yet Reviewed
$65.99
—
$96.99
System 1 offers these replacement fuel filter fittings for use with their fuel filters. These fittings are made of billet aluminum and have an anodized finish.
Not Yet Reviewed
$51.00
Lokar Hi-Tech throttle cables are available in stainless steel braided, black stainless steel braided, or black polyethylene housings. They're designed with a specially extruded liner for the extended life of the cable—not to be confused with ordinary braided brake hose. These cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying; and feature a "U-Cut-to-Fit" outer housing and stainless inner wire. The clevises are designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation. Each cable comes with installation instructions. Order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 661 )
$71.95
—
$114.95
Carter universal rotary vane electric fuel pumps operate using leaded and unleaded gasoline, gasohol, and fuel boosters. They have an internal pressure-regulating valve, and feature free-flow fuel delivery. These pumps have no points to burn out, and no shaft seals to leak or deteriorate.
( 592 )
$105.99
Lokar Midnight Series throttle cables have a PTFE inner liner and a black braided stainless steel jacket, along with aluminum clevis ends for smooth, no-bind cable operation. They can be easily adapted to fit most gas pedals and throttle assemblies. The cables are available in different lengths and cable end types; order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 107 )
$71.95
—
$114.95
Edelbrock universal fuel hose and filter kits allow you to add a fuel filter where none existed. Utilizing part of your stock steel fuel line, they offer a quick fix--simply cut the stock line, install the compression fitting, add the neoprene hose, clamp, and fuel filter, and connect to your carburetor. Kits include fuel filter, fuel hose, special fittings to adapt 5/16 in. and 3/8 in. steel line to hose, and stainless steel worm-type hose clamps. Keep your fuel clean with Edelbrock universal fuel hose and filter kits.
( 22 )
$60.95
The vent permits air to escape as the fuel cell is filled and permits filtered air to enter when fuel is getting consumed, allowing the tank to breath to avoid pressurization during normal operation. Radium Engineering fuel cell vent kits include an air filter, 6 ft. (1.8m) of fuel vent hose, and adapter fittings. They are available for standard-fill systems with direct fill or remote fill necks or in a high-flow kit that is typically used for quick-fill systems that commonly use a dry break and dump can. Kits will require the appropriate AN male vent fitting.
( 1 )
$56.95
Are you looking for more fuel flow for your engine? These Summit Racing LS Series fuel filter kits have been put together using a Corvette- style, 58 psi-rated fuel filter/regulator. Also included in these kits are -6 AN inlet and outlet fittings. They come available in either black or blue anodized AN fittings.
( 18 )
$70.96
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
Fleece Performance turbo oil feed lines ensure that your system gets an adequate oil supply. They offer replacements for your OE setup, as well as remote kits that prevent premature bearing failures. All include extra-flexible, smooth bore PTFE hose and high-quality fittings. The remote kits will also include a stock oil feed plug and an oil galley rifle fitting. Whether you're replacing or upgrading, Fleece Performance turbo oil feed lines are available for your application.
( 1 )
$69.99
—
$99.99
Warm up fast with Shifnoid engine lean out kits. Connected to your intake manifold or carburetor spacer, these kits present an ideal solution for rapid warmup--especially for your alcohol engines. Shifnoid kits include push-to-connect fittings, an air line, and an industrial-grade valve.
( 1 )
$82.99
—
$97.99
Lokar's Hi-Tech blower drive throttle cables are designed to operate with BDS, Enderle, and Weiand linkage for side-mounted carburetors. Their extruded liner extends cable life, while the included aluminum fittings and ferrules eliminate frayed ends. The blower throttle cables include a stainless steel mounting bracket and rod end for a complete installation. Order the length and options preferred for your application.
( 10 )
$102.95
—
$114.95
ICT Billet turbo oil feed lines feature a PTFE core with a braided stainless steel outer jacket. They include pre-installed -4 AN hose ends: one 90 degree female and one straight female. They are available in different lengths to help you with your project, from start to finish.
( 10 )
$54.99
—
$58.99
Snow Performance electronic solenoids are designed for use with the Snow carburetor plate nozzle adapter. They include a wiring harness, a plastic solenoid with 1/8 in. NPT female threaded attachments, and necessary fittings. The solenoids should be mounted after the throttle plate to keep from siphoning at idle, or if the nozzle must be mounted lower than the reservoir to keep from gravity feeding.
( 11 )
$73.00
Intended for street and competition use where increased flow is required, Edelbrock VRS-4150 carburetor fuel line kits are designed specifically for the VRS-4150 and will not fit other 4150-style carburetors. These all-black kits feature Russell Twist-Lok hose and -8 AN 6061 aluminum fittings. The 1/8 in. NPT inlet fitting houses a threaded bung for a fuel gauge. Kits are simple to install and connect to any VRS-4150 carburetor regardless of CFM size.
Not Yet Reviewed
$86.95
These Lokar Duo-Pak throttle cables have a PTFE inner liner and a stainless steel or black nylon outer covering, along with aluminum Clevis ends for smooth, no-bind cable operation. The cables easily adapt to most gas pedals and throttle assemblies. They include a throttle return spring and mounting bracket to complete installation.
( 88 )
$118.95
On Sale
Put a sock in your fuel tank! FUELAB in-tank straining filters are compatible with gasoline, diesel, methanol, and ethanol fuels. The "sock" design of the 75 micron stainless steel filters includes a -10 AN fitting adapter—and is rated up to 1800 hp. These universal filters are cleanable and able to support a flow of 200 gph. Make sure contaminants are trapped before they can damage your engine. FUELAB has the expertise and the products to protect your system.
( 4 )
$77.00
$69.30
Lokar Vintage Series throttle cables provide a period-correct appearance for your engine compartment—with all the advancements of modern cables. These braided stainless steel wires feature a specially extruded liner for long life, along with a retro-look braided cloth cover and protective clear coating. The jackets are offered in a variety of throwback color combos. Each throttle cable is equipped with black aluminum ferrules to eliminate fraying and aluminum fittings for an easy installation. Vintage Series cables are available in several lengths for fitment on many applications. For high-quality throttle cables with a unique "dated" look, choose Lokar!
( 2 )
$83.95
—
$106.95
Radium Engineering distribution blocks ensure the most direct path for unrestricted flow. CNC-machined from 6061 aluminum, they feature three AN ORB female ports on one side and one larger AN ORB female port on the opposing side. The blocks include fittings, are anodized for corrosion resistance, and can be used in all fluids including alcohol (ethanol/methanol), gasoline, coolant, water, air, and oil.
( 1 )
$66.45
—
$85.45
On Sale
These NOS distribution blocks are precision-machined to help distribute balanced amounts of nitrous and fuel to each intake port. They use 1/8 in. inlets and are available with either 1/8 in. or 1/16 in. outlets. Fittings are sold separately.
( 2 )
$123.95
$53.25
—
$99.95
Radium Engineering's Venturi jet pump kits are designed for high-flow aftermarket pumps and includes three different Venturi orifices to match a wide range of pump flow rates. The Radium jet pump is an effective device for drawing fuel from one side of a fuel tank to the other. Fuel flowing through the venturi creates vacuum in the perpendicular port. The Venturi jet pump uses a machined aluminum housing that is anodized, and laser engraved. Kit includes three interchangeable orifices that were precisely calculated, and vacuum pressure tested with multiple pump combinations. All hose barb connections are compatible with 5/16 in. or 3/8 in. ID hose. Also, the crossover siphon port can be easily adapted to common hoses as it uses 6AN ORB (9/16 in.-18 O-ring) female threads.
( 1 )
$85.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
