Availability
Morimoto projector headlight conversion harnesses are designed to adapt the 2009+ Dodge Ram projector-style headlights onto trucks that came standard with the basic dual halogen headlamps. The harnesses enable you to upgrade to the most modern Ram look without cutting, splicing, or modifying anything on the truck's factory harness. It's a seamless plug-and-play solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Dodge. Note: These adapters are tested and work on OEM/TYC headlights. At this time, they do not work on DEPO aftermarket headlights.
( 2 )
$94.00
Morimoto XB LED headlight adapters allow you to upgrade your existing units. These headlight adapters retain all OE functions and make installation of the XBs a simple plug-and-play operation. Morimoto headlight adapters are vehicle-specific, choose the correct XB LED connection for your vehicle.
Not Yet Reviewed
$55.00
—
$109.00
Morimoto XB ballast resisters are designed to last for 2,500 hours. Their powerful AS15-G4 IC chip recognizes outside system faults, such as a loose high-voltage connection, and after one misfire will cut power rather than potentially self-destruct. The software is proprietary to this ballast alone. Additional features include: * PROTECTED: The diecast aluminum shell houses a 100 percent potted circuit board, eliminating any chance of moisture damage. The AMP SuperSeal 3-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output. * COMPACT: The slim 18mm body will mount almost anywhere. There are four mounting points cast directly into their shell, no spare brackets to mess with. * VERSATILE: Since the igniter cord can be unplugged from the HID ballast computer, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced. * FAST, FRIENDLY AND EFFICIENT: Power hungry HID ballast replacements never work well with tricky CanBus systems, but the new Morimoto XB35 2.0 ballast consumes less than HALF of the start current that the previous model did. Far less than Denso, Mitsubishi, or FastBright—which makes their ability to reach full intensity a more efficient process. * MODERN: Like all modern OEM ballasts, the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up. * FUNCTIONAL WORK OF ART: Morimoto XB35 2.0 HID ballasts are just as good looking on the outside as they are well-engineered on the inside. Stainless steel hardware. TechFlex braided insulation. Embossed circuitry on the shell. * MATURE: The XB35 2.0 features countless advancements from the most popular OEM ballasts. In terms of modern headlight tech, High Intensity Discharge is now fully matured; and therefore the aftermarket gets the full benefit engineering progress in the OEM world.
Not Yet Reviewed
$89.00
No doubt the aluminum F150 is a capable truck, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers forever, and now the lineup expands with offerings such as the new high performance XB LED taillights! * COMPATIBLE: With all Non-BLIS F150s from 2015-20, these complete taillight assemblies will swap directly in place of the original F150 taillights, use all of the stock mounting points, and should only take around 30 minutes to install. * PLUG-N-PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring (2018-20 do require the optional harness). They will plug into the factory connectors for the stock lights; and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-n-play install. No additional resistors, modules, etc. needed! NOTE: 2018-20 F150S REQUIRE THE OPTIONAL HARNESSES, HOWEVER THESE ARE STILL NOT COMPATIBLE WITH OEM LED OR OEM BLIS TAILLIGHT-EQUIPPED TRUCKS. * STYLE: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your F150 are available with either a smoked or red lens. Both will illuminate red. * WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is lightweight and much stronger than comparable cheap alternatives. The XB taillights may not be the cheapest new taillights for your F150, but they're OE quality.
Not Yet Reviewed
$56.00
Morimoto XBT Bluetooth RGB controller harnesses provide plug-and-play installation and complete control with a proprietary app that works with both iPhone and Android devices. The app features a color wheel that gives you virtually infinite control over the exact hue and intensity of your RGB accessories. Adjustable Fade, Strobe, and pre-programmed color-changing themes provide a handful of special effects to spice it up. And you can save your favorite combinations to pull up later. Morimoto XBT Bluetooth RGB controllers are capable of operating up to three different zones/pairs of RGB accessories—apply a different color or effect to each zone, or lock them together to easily apply the same settings across the board. For safety and convenience, when the XBT System powers up it defaults the output to white. The power to control your RGB accent lighting will be in the palm of your hand with Morimoto XBT Bluetooth controllers.
Not Yet Reviewed
$105.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
