Availability
Featuring precision tolerances and superior final machining, COMP Cams Sportsman stainless steel valves offer outstanding performance and durability for high-rpm, high-horsepower engines. They are manufactured from 21-4N high-strength, one-piece stainless steel. They also feature a chrome polished stem, hardened tips, and high-flow underhead for minimum flow restriction. Recommended for hydraulic, mechanical, or roller lifter camshaft cylinder heads, COMP Cams Sportsman stainless steel valves provide you with the reliability and performance that you require.
( 7 )
$111.95
—
$113.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 273 )
$50.95
—
$114.95
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 164 )
$52.95
—
$110.95
COMP Cams Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. They are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Super valve locks will fit any COMP Cams 10 degree retainer and are recommended for all race applications due to their superior strength.
( 128 )
$54.95
—
$61.95
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 75 )
$65.95
—
$83.95
COMP Cams valve guide cutting tools are designed to cut a larger diameter for your aftermarket valve guide. They are made from high-strength steel with a carbide bit for a quality cut every time. These cutting tools require the use of an arbor or pilot that is sold separately.
( 48 )
$97.95
COMP Cams valve spring seat-cutting tools allow you to machine the cylinder head for the correct diameter valve spring. This will allow you to install larger springs and hardened spring seats. They will require the use of an arbor/pilot (sold separately).
( 34 )
$119.95
As with all other parts in the valvetrain, the area where the spring sits takes a beating. The old standard shims simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams offers this set of valve spring shims to solve this problem and eliminate failures.
( 104 )
$88.95
COMP Cams Street valve locks are stock replacement for stock engine rebuilds. They're stamped and hardened for superior wear resistance. Use these steel valve locks for street applications with standard valve spring loads. They're available in a variety of sizes, styles, and quantities.
( 42 )
$52.95
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.
( 191 )
$53.95
—
$56.95
COMP Cams valve spring height micrometers are the quickest, easiest, and most accurate way to measure valve spring installed height. They install just like a valve spring and then the tool is expanded until it has fully seated the valve, locks, and retainer. By simulating the installation, they're able to read the measurement precisely.
( 33 )
$113.95
These COMP Cams E-Z valve lash adjusting wrenches are designed for rockers utilizing polylock-style adjusting nuts. They make adjusting your valve lash easy and ultra-accurate.
( 5 )
$77.95
COMP G2™ Valve Springs represent months of work by their engineering team to identify dated valve spring designs and bring them up to modern-day standards. COMP G2™ valve springs are using the same materials and manufacturing technologies demanded by today's race teams and modern engine platforms. These springs are a product of innovative design and superior craftsmanship using premium materials and precision manufacturing. Engineered with state-of-the-art techniques utilizing premium wire, they redefine reliability and consistency in the performance automotive aftermarket. Featured are single and dual valve springs, available as individuals or four, six, or eight-cylinder applications.
( 2 )
$60.95
—
$86.95
COMP Cams valve spring compressor components enable you to replace broken or missing parts economically. These replacement components are designed to restore your tool to its original working order—and save you from having to buy a whole new valve spring compressor because of one missing part.
Not Yet Reviewed
$87.95
COMP Cams spring seat cutter (sold separately) requires the use of an arbor/pilot, which is available in different sizes. These COMP Cams arbor/pilots also work with valve guide cutters (sold separately) used for shortening the guide for a high lift cam or installing a COMP Cams PTFE seal for oil control.
( 22 )
$54.95
These unique tools from COMP Cams make setting up valve springs on a Rimac Spring Tester a breeze. These brackets mount to the spring tester shaft and allow for the installation of a dial indicator (not included) to measure the spring height to .001 in. This level of precision is crucial when measuring open pressure and height. The kits also include a 1 1/2 in. standard and a 2 in. dial indicator extension tip.
( 3 )
$70.95
In today's higher rpm engines, the tip of the valve stem is subjected to a tremendous pounding. The best solution to this problem is COMP Cams' lash caps. These hardened lash caps are precision-machined and ground perfectly flat, to maintain accurate valvetrain adjustment.
( 30 )
$50.95
—
$80.95
COMP Cams air operated valve holders allow valve spring changes without cylinder head removal. Simply screw an adapter into the cylinder head's spark plug hole, pressurize the cylinder with compressed air to between 90 and 120 psi, and you're ready to remove the springs.
( 2 )
$51.95
Simplify your valvetrain assembly! COMP Cams high performance valve spring kits have everything that you need for a complete valve spring assembly. Springs and retainers are included, along with complete instructions for a worry-free installation.
( 32 )
$90.95
These vacuum canisters from COMP Cams capture an extra shot of vacuum from your engine for your power brakes. They are made for cars equipped with big cams and power brakes. These units approximately double the volume of vacuum available for your power brakes. They are recommended for cars with 14 in. of vacuum or less.
( 47 )
$73.99
—
$92.95
COMP Cams valvetrain organizer trays are perfect for novice and professional engine builders alike. These durable polymer trays neatly store your valvetrain components while you're assembling or rebuilding your engine. The organizers are labeled, front and rear, to help keep track of your part location for reassembly. Each tray has built-in handles to make easy work of moving parts around your shop or garage. They come available for valve springs or rocker arms.
( 4 )
$74.95
—
$78.95
COMP Cams offer mounting kits that enable you to mate GM LS3 coils (vertical mounting kit) and FAST XR-1A LS-style coils (horizontal mounting kit) to COMP's billet valve covers. Manufactured from steel and E-coated for durability and a sleek appearance, these brackets are lightweight in design and the perfect complement to COMP Cams billet valve covers. Built to keep the coils off the engine to avoid dangerous "heat soak" conditions, they also allow for quick and easy access to the plug wires and coil harness. Order the kit recommended for your year/make and engine application.
Not Yet Reviewed
$109.95
COMP Cams phaser lockout kits allow engine builders and enthusiasts to eliminate variable valve timing in specific applications, making the installation of larger camshafts possible for bigger power gains. Phaser lockouts will help gain more piston-to-valve clearance and simplify ECU tuning.
( 1 )
$92.95
Comp Cams cam phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm Engine oil is pressure-fed to the phasers through passageways in the cylinder heads and cams. The engine computers control solenoids that adjust this oil flow into and out of the phasers' control chambers, creating the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap. COMP Cams cam phaser limiter kits restrict the range of cam timing movement (14 degrees for Chrysler, 20 degrees for Ford, and 22 degrees for GM), thus providing the necessary valve clearance for serious performance cams with tighter lobe separations--all while utilizing the benefits of VVT technology. Gain some serious upper rpm power without sacrificing bottom end or mid-range performance with Comp Cams cam phaser limiter kits.
( 6 )
$82.95
—
$114.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
