Availability
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 164 )
$52.95
—
$110.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 273 )
$50.95
—
$114.95
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 75 )
$65.95
—
$83.95
COMP Cams valve spring seat-cutting tools allow you to machine the cylinder head for the correct diameter valve spring. This will allow you to install larger springs and hardened spring seats. They will require the use of an arbor/pilot (sold separately).
( 34 )
$119.95
As with all other parts in the valvetrain, the area where the spring sits takes a beating. The old standard shims simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams offers this set of valve spring shims to solve this problem and eliminate failures.
( 104 )
$88.95
COMP Cams valve spring height micrometers are the quickest, easiest, and most accurate way to measure valve spring installed height. They install just like a valve spring and then the tool is expanded until it has fully seated the valve, locks, and retainer. By simulating the installation, they're able to read the measurement precisely.
( 33 )
$113.95
COMP G2™ Valve Springs represent months of work by their engineering team to identify dated valve spring designs and bring them up to modern-day standards. COMP G2™ valve springs are using the same materials and manufacturing technologies demanded by today's race teams and modern engine platforms. These springs are a product of innovative design and superior craftsmanship using premium materials and precision manufacturing. Engineered with state-of-the-art techniques utilizing premium wire, they redefine reliability and consistency in the performance automotive aftermarket. Featured are single and dual valve springs, available as individuals or four, six, or eight-cylinder applications.
( 2 )
$60.95
—
$86.95
These unique tools from COMP Cams make setting up valve springs on a Rimac Spring Tester a breeze. These brackets mount to the spring tester shaft and allow for the installation of a dial indicator (not included) to measure the spring height to .001 in. This level of precision is crucial when measuring open pressure and height. The kits also include a 1 1/2 in. standard and a 2 in. dial indicator extension tip.
( 3 )
$70.95
COMP Cams valve spring compressor components enable you to replace broken or missing parts economically. These replacement components are designed to restore your tool to its original working order—and save you from having to buy a whole new valve spring compressor because of one missing part.
Not Yet Reviewed
$87.95
Simplify your valvetrain assembly! COMP Cams high performance valve spring kits have everything that you need for a complete valve spring assembly. Springs and retainers are included, along with complete instructions for a worry-free installation.
( 32 )
$90.95
COMP Cams spring seat cutter (sold separately) requires the use of an arbor/pilot, which is available in different sizes. These COMP Cams arbor/pilots also work with valve guide cutters (sold separately) used for shortening the guide for a high lift cam or installing a COMP Cams PTFE seal for oil control.
( 22 )
$54.95
COMP Cams valvetrain organizer trays are perfect for novice and professional engine builders alike. These durable polymer trays neatly store your valvetrain components while you're assembling or rebuilding your engine. The organizers are labeled, front and rear, to help keep track of your part location for reassembly. Each tray has built-in handles to make easy work of moving parts around your shop or garage. They come available for valve springs or rocker arms.
( 4 )
$74.95
—
$78.95
COMP Cams Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. They are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Super valve locks will fit any COMP Cams 10 degree retainer and are recommended for all race applications due to their superior strength.
( 128 )
$54.95
—
$61.95
Built to outlast and outperform in accuracy and strength, Ultra Pro Magnum XD roller rocker arms are engineered from durable 8650 steel and include a machined billet pushrod seat insert for a wide range of super accurate ratios. A unique and wide ratio range to fit almost any popular application from 1.5 to 1.8 in 0.5 in. increments for Chevy and 1.6 to 1.73 for various Ford applications is available. These Ultra Pro Magnum XD rockers are fully rebuildable and boast precision-sorted needle bearings and hardened roller tips. And, they work with most diameter springs and retainers. The XD design utilizes advanced FEA and CAD design and development to improve strength, stiffness and MOI (moment of inertia) optimization for drag and circle track applications.
( 59 )
$55.95
—
$59.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$81.95
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 453 )
$85.95
—
$131.95
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$108.95
—
$115.95
Before installing the COMP Cams 5455 spring limiter tool, it's necessary to compress the variable valve timing spring. These camshaft phaser disassembly wrenches compress the spring—so you can install the 5455 limiter tool and then the 5457 or 5459 phaser limiter plug. Order the wrench recommended for your year/make and engine application.
Not Yet Reviewed
$56.95
COMP Cams rod bolt stretch gauges are designed to actually hold onto the rod bolt while it's being tightened. The included .001 in. mini dial indicator has been modified with a super high-tension spring for superior holding power and precision. COMP Cams lightweight stretch gauge also features an adjustable anvil to accommodate rod bolt lengths up to 2.750 in. Ever wonder why rod bolt manufacturers supply stretch factors, as well as torque settings? Well, it's because stretch is the most accurate way to measure fastener pre-load. The COMP Cams rod bolt stretch gauge tools can help make the entire process much easier.
Not Yet Reviewed
$94.95
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 112 )
$50.95
—
$65.95
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.
( 190 )
$53.95
—
$56.95
COMP Cams Street valve locks are stock replacement for stock engine rebuilds. They're stamped and hardened for superior wear resistance. Use these steel valve locks for street applications with standard valve spring loads. They're available in a variety of sizes, styles, and quantities.
( 42 )
$52.95
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 202 )
$51.95
—
$76.95
COMP Cams air operated valve holders allow valve spring changes without cylinder head removal. Simply screw an adapter into the cylinder head's spark plug hole, pressurize the cylinder with compressed air to between 90 and 120 psi, and you're ready to remove the springs.
( 2 )
$51.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
