Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
183 Results Found For "an 6 fittings"
Showing In Stock Items. Show All 212 Items.
Not Showing Customizable Items. View Customizable Items.
Russell O-Ring Power Steering Adapter Fittings
Plumbing your power steering system has never been easier with Russell O-ring power steering adapter fittings. These high quality fittings feature an anodized finish to protect against corrosion.
( 12 )
$339.95
Russell AN to Metric Adapter Fittings
Russell AN to metric adapter fittings use a 37 degree sealing angle on the AN side, which guarantees a positive seal at maximum operating pressures. These adapters are available for a variety of AN hose and metric thread sizes.
( 104 )
$339.95
Russell AN to Inverted Flare Fittings
Don't take chances. Russell AN to inverted flare fittings are designed to ensure the reliability required in your plumbing project. They're made in an assortment of designs to adapt AN-style fittings to a wide range of inverted flare applications.
( 80 )
$319.95
—
$339.95
Earl's Performance Ultra-Flex 660 Hose
Earl's Performance Ultra-Flex 660 hose uses the same inner tubing as Earl's KEVLAR®-covered Ultra-Flex 650 hose, but it is covered with high tensile strength 304 stainless steel braid. You get the same flow rate and flexibility advantages as their KEVLAR®-covered hose, but with additional protection. The carbon-lined inner tubing (for static dissipation) is smooth bore with a large ID for maximum flow; the convoluted exterior provides incredible flexibility. Ultra-Flex 660 hose is 40 percent lighter and has an average ID 14 percent larger than Earl's premium stainless braided rubber hose. Additional features of Earl's Performance Ultra-Flex 660 hose include: * Inner tubing made of PTFE for a large range of applications including fuel (including exotics and E-based), oil, water, methanol, and air * Very high vacuum rating of – 29Hg * Remains flexible at temperatures between -94 degrees F and +510 degrees F * Clean and fast flowing * Sold by the foot * Accepts the same hose ends and crimp collars made for KEVLAR® Ultra-Flex 660 hose—using the same crimper and dies Note: For use with Earl's Ultra-Flex crimp-style hose ends only. No other Earl's hose ends are intended for use with this hose. The use of other manufacturers' hose ends is not recommended and may compromise the pressure capabilities and durability of the hose.
Not Yet Reviewed
$286.95
Fragola Performance Systems Race-Rite Hose
Too many varying types of hoses under the hood? Fragola Performance Systems Race-Rite hose is designed to be compatible with all pumped fluids, and capable of tight bend radiuses, as well as higher flow rates. It features an enlarged inner diameter with a smoothbore conductive PTFE core that utilizes a convoluted exterior and black aramid braid cover. This hose is available in multiple sizes and lengths to properly fit your application. Enjoy the simplicity of the ultimate fuel, ATF (automatic transmission fluid), and coolant non-pro hoses: Fragola Race-Rite! Features and specs: * Smoothbore conductive PTFE core is resistant to fuel permeation * 60 percent lighter than their 8400 Series black nylon race hose * True-to-size I.D. for improved flow rate * Works with all fluids, including ethanol-type fuels, ATF, coolant, and oils * Operating range -65 degrees to 500 degrees F * Ideal for use with Race-Rite crimp-on hose ends
( 4 )
$253.99
Fragola Performance Systems Race-Rite PRO Hose
Too many varying types of hoses under the hood? Fragola Performance Systems Race-Rite PRO hose is designed to be compatible with all pumped fluids, and capable of tight bend radiuses, as well as higher flow rates. It features an enlarged inner diameter with a smoothbore conductive PTFE core that utilizes a convoluted exterior and black aramid braid cover. This hose is available in multiple sizes and lengths to properly fit your application. Enjoy the simplicity of the ultimate fuel, ATF (automatic transmission fluid), and coolant pro hoses: Fragola Race-Rite PRO. Features and specs: * Ideal in dry sump or high vacuum applications * Convoluted exterior with added spiral wire increases hoop strength to prevent hose sucking shut under high vacuum * Added externally wound, spiral wire increases flexibility and bend radius * Smoothbore conductive PTFE core is resistant to fuel permeation * 50 percent lighter than Fragola's 8400 Series black nylon race hose * True-to-size I.D. for improved flow rate * Works with all fluids, including ethanol-type fuels, ATF, coolant, and oils * Operating range -65 degrees to 500 degrees F * Ideal for use with Race-Rite crimp-on hose ends
Not Yet Reviewed
$320.99
—
$468.99
Earl's Performance Staubli SPT Ball Locking Dry Break Couplings
Earl's Performance Staubli SPT ball locking dry break couplings provide smooth leak-free performance for ethanol, oil, and all fuel types. Their strong aluminum construction and specialty seals ensure longevity while their smaller size eases installation. These lightweight couplings are highly durable, available in a variety of sizes, and designed not to leak with valve disconnection. Keep your vehicle's fluids running safely with Earl's Performance Staubli SPT ball locking dry break couplings.
Not Yet Reviewed
$294.95
Russell Push-On EFI Fittings
Russell push-on EFI fittings are precision-machined to ensure outstanding thread engagement. The aluminum adapters are available in various finishes, sizes, attachment styles, and configurations to fit OEM hard lines. Some models are quick-connect and/or swivel. They're designed for a positive seal, even at maximum operating pressures. Plumb your electronic fuel injection system with quality accessories from Russell Performance!
( 144 )
$259.95
Russell Fuel Rail Fitting Adapters
Russell fuel rail fitting adapters allow for the connection of Russell hose ends to almost any component. These adapters are offered in standard thread, metric thread, and pipe thread to fit most popular oil pumps, fuel pumps, and fuel filters—plus a variety of other common components. The regulator fittings provide a positive seal at maximum operating pressures. They're available in choice of aluminum or steel, in a variety of sizes, in angles or straight, as well as in different finishes, and attachment options. Order the Russell fuel rail fitting adapters designed to fit your application.
( 87 )
$259.95
—
$339.95
Vibrant Performance Braided Flexible Race Hose
Vibrant Performance braided flex hose are available in stainless steel and nylon braided covers which provide excellent abrasion resistance and surrounds a reinforced synthetic rubber inner liner. Offered in several lengths and AN sizes, they are suitable for oil, water, fuel, methanol, coolant, vacuum service, and E85. Note: These hoses are NOT suitable for use as brake lines or other hydraulic pressure lines, nor are they suited for extended submersion in fuel or oil (not recommended for in-tank applications).
( 87 )
$269.99
On Sale
Earl's Performance Pro-Lite 350 Hose
Earl's Performance Pro-Lite 350 hose is constructed from a tough, abrasion-resistant nylon sheathing banded to the textile inner braid that's embedded in the synthetic rubber liner. This gives the hose incredible flexibility, while maintaining the ability to withstand high vacuum and hot oil temperatures. The hoses are rated to withstand a maximum pressure of 350 psi and an operating temperature range of -40 to +300 degrees F. Pro-Lite 350 hose can take the most demanding conditions and still deliver you to the winner's circle.
( 24 )
$278.95
—
$499.95
Earl's Performance Power Steering Hose
Earl's Performance power steering hoses are triple-steel and fabric braid-reinforced high-pressure hoses. They were developed specifically to meet the demands of power steering systems. These flexible hoses are also suitable for hydraulic and air lines, and come with a blue or black fabric outer covering. When used with Earl's power steering hose ends, Earl's power steering hose is rated for up to 2,250 psi operating pressures. The use of other manufacturer's hose ends is not recommended.
( 28 )
$286.95
—
$299.95
Vintage Air A/C Condenser Kits
If you've ever wanted to add A/C to your vintage hot rod or muscle car, Vintage Air A/C condenser kits are a must have. These kits are designed to provide outstanding performance and instant temperature adjustments. Vintage Air A/C condenser kits are engineered specifically for each individual application and include the condenser, drier and everything else you need for a clean and complete installation.
( 4 )
$348.99
—
$401.99
Aeromotive PTFE Stainless Braided Fuel Lines
Aeromotive PTFE stainless braided fuel lines are ideal for street and racing applications where E85, gasoline, or methanol compatible fuel hose is needed. The stainless outer braid provides impact and abrasion resistance to protect the PTFE inner liner. These liners are specially carbonized for conductivity, which is critical for fuel handling. The fuel lines provide outstanding flow capacity; they're smaller on the O.D. for the same I.D. of a comparable rubber braided line for easier routing in tight spaces. The lines deliver extended service life in any fuel, as they will not harden, micro-fracture, or permeate fuel vapor (vapor-walk) like normal rubber braided line—minimizing fuel smell in the vehicle storage area. Choose the length and AN diameter needed for your application.
( 9 )
$289.33
—
$358.52
Russell ProFlex Hose
Russell's ProFlex hose series represents the ultimate in mandrel-produced, stainless steel, wire braid hose. It has a unique CPE inner liner that's compatible with synthetic lubricants and hydrocarbon racing fuels. ProFlex hose is perfectly matched for use with Russell full-flow hose ends (taper design). It also features temperature ranges of -40 to +350 degrees F for a wider variety of uses and routing. Order the length and diameter needed for your application.
( 149 )
$404.95
Russell ProClassic Hose
This new Russell ProClassic hose is designed for racers and performance enthusiasts who want high-quality plumbing that is lighter and easier to assemble than traditional braided stainless steel hose. It features a lightweight nylon fiber braid over a durable synthetic rubber core with a maximum pressure rating of 350 psi. Russell ProClassic hose is capable of handling nearly every plumbing task on your vehicle and is safe for water, oil, and antifreeze. The hose is easy to cut, making for quick, easy assembly. Available in a variety of hose sizes and lengths, this Russell ProClassic hose can be used in many different areas.
( 68 )
$404.95
Redhorse Performance 230 Series Black Nylon Braided Hose
Redhorse Performance 230 Series black nylon braided hose is constructed with a unique half layer of high-quality braided stainless wire hidden beneath. The 230 Series uses a fuel resistant seamless NBR synthetic tube liner and combine that with RHP's industry exclusive bonding process and you have the highest quality nylon braided hose available. With a stainless core you can be assured that this hose gives you the best of both worlds—an aesthetically pleasing hose with protection of stainless, all while providing a pressure rating unsurpassed by the competition. Select the hose diameter and length that you need. Features and specs: * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * Engineered for use with RHP 1000 Series swivel seal, 6000 Series non-swivel and 7000 Series crimp style hose ends * NHRA accepted Important Note: Not designed for use on high pressure power steering lines and is not to be used for high pressure hydraulic applications.
( 2 )
$281.53
—
$475.55
Earl's Performance Speed-Flex Hose
Earl's Performance Speed-Flex hose is used with the Speed-Seal reusable hose ends and can handle pressure of up to 3,000 psi. Earl's considers it their highest-pressure hose, and it's lightweight and resistant to almost everything. Speed-Flex is most commonly used for brake lines, fuel/oil gauge lines, hydraulic clutches, power steering, and fuel and oil lines. It's constructed from synthetic rubber or PTFE, with a braided stainless steel covering. Some hoses are PCV coated, as well. Your options include operating psi, size, length, and color. Order the Speed-Flex hose needed for your applications.
( 22 )
$293.95
Earl's Performance Pro-Lite Ultra Hose
Earl's Performance Pro-Lite Ultra hose is the premier choice for your hot rod or race car. It features advanced designs that make the hose ideal for high-pressure applications up to 500 psi. Their inner tube of oil-resistant "PKR" synthetic rubber won't degrade or leak when exposed to most fluids, and it's reinforced with a stainless steel braid that greatly increases the hoop strength—keeping the hose from bulging or separating from its fittings. Finally, the braided nylon fiber cover is resistant to oil, abrasion, and extreme weather, keeping Pro-Lite Ultra hose looking great and functioning the way it's meant to.
( 3 )
$339.95
Redhorse Performance 200 Series Standard Stainless Steel Hose
The RHP 200 Series hose is a true double braided stainless hose that uses the highest quality stainless wire available. RHP's 200 series hose uses a fuel resistant seamless NBR synthetic tube liner. Combine that with their industry exclusive bonding process and you have an extremely high performing hose that offers excellent protection from abrasion, while maintaining maximum pressure capabilities. NHRA-accepted, this hose is available in a variety of different lengths, select the application you need. Features and specs: * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * Engineered for use with RHP 1000 Series swivel seal, 6000 Series non-swivel and 7000 Series crimp style hose ends Important Note: Not designed for use on high pressure power steering lines and is not to be used for high pressure hydraulic applications. Not to be used with e85 gas.
( 4 )
$281.53
—
$475.55
Russell ProClassic II Hose
For the traditionalist, Russell offers their ProClassic II black hose. If your belief is that the hose you use to plumb your ride or racer should be black, then ProClassic II is for you. The all-black nylon fiber braid of the outer cover wraps around a CPE synthetic inner liner for abrasion resistance. Plus, the chlorinated polyethylene inner liner has a bonded, multi-braid stainless steel wire to improve the bend radius, with less possibility of collapsing when plumbing those tight areas. Safe for fuel, oil, antifreeze, and other fluids, Russell hose is easy to cut and easy to assemble. For classic looks and professional quality you can count on under the hood, choose Russell ProClassic II hose—available in a variety of lengths and AN sizes.
( 39 )
$404.95
DeatschWerks Stainless Steel Double-Braided Hose
DeatschWerks stainless steel double braided hose is offered in PTFE and CPE rubber material. Their selection of sizes and several lengths delivers compatibility with the increasing list of available pump gases, race fuels, and ethanol blends wrapped in stainless steel braided coverings. Choose the size, length, and material preferred for your plumbing project. DeatschWerks stainless steel hose inner material choices: * CPE—rubber fuel lines are cord reinforced for high-pressure and lined for compatibility with ethanol-based fuels * PTFE—lines have increased fuel compatibility for methanol and e100; PTFE also allows tighter radius turns and zero fuel vapor permeability
( 6 )
$350.00
—
$500.00
Redhorse Performance 402 Series Push-Lock Hose
The Redhorse Performance 402 Series push-lock hose contains a fully e85 compatible inner tube, a braided layer of tough nylon mesh and a smooth outer cover. Engineered for use with RHP 2000 Series hose ends, the RHP 402 Series hose will deliver great performance and can be assembled in minutes. Hit the sweet spot between ease of installation and high performance with the Redhorse Performance 402 Series hoses! Features and specs: * Rated for temperatures up to 212 degrees F (100 Celsius) * With a max working pressure of 300 psi, the 401 Series push-lock hoses are not recommended for high pressure applications or suction systems * NHRA accepted Note: If you are thinking of running the hose near a heat source, RHP recommends using their 244 Series fire sleeves over the line, which are good to withstand continuous working temperatures up to 500 degrees F.
Not Yet Reviewed
$268.57
Speedflow 200 Series PTFE Braided Stainless Steel Hoses
Speedflow 200 Series PTFE braided stainless steel hoses are constructed from a PTFE inner tube compatible with all brake and clutch fluids, oil and fuels. The outer stainless steel braided cover provides both fire and heat resistance and gives the hose the high-pressure rating. The size -6 AN hose and up are manufactured with anti-static PTFE tube suitable for use as main fuel lines. Available in different sizes, order the Speedflow 200 Series hose designed to fit your application needs—and get ready to plumb like a pro!
Not Yet Reviewed
$251.24
—
$355.13
