Availability
Showing In Stock Items. Show All 37 Items.
Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.
( 179 )
$390.95
—
$510.95
These COMP Cams Ultra Gold ARC Series aluminum break-in rockers are designed with a lower-than-stock ratio to help break in new Chevrolet V8 big block applications. They are engineered to eliminate excess open spring pressure, making them a must-have for the break-in process. If you have a new big block to break in, no other cams will help you do the job better than these COMP Cams Ultra Gold ARC Series aluminum break-in rocker arms.
Not Yet Reviewed
$403.95
—
$524.95
COMP Cams High Energy camshafts are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These cams offer an increase in both gas mileage and power throughout the rpm range for most street applications.
( 61 )
$304.95
Initial startup is the most critical time in the life of any camshaft. COMP Cams Pro Cam lube can break in your camshafts properly. This lube must be spread generously on all lobes of the cam, the bottom of the lifters, and the distributor gear when installing a cam. This is the instant protection that you need to guard against any premature wear.
( 94 )
$478.95
Save your cam with COMP Cams composite coated cam bearings. High performance engines give your cam bearings a beating with their radical rpm, intense heat, and extreme pressures! These coated bearings retain engine oil on the surface--even under severe stress. Their fluoropolymer coating is self-lubricating and also offers great protection when oil is scarce during start-up. Save your cam from momentary oil starvation and the harsh punishment of your performance engine with COMP Cams composite coated cam bearings.
Not Yet Reviewed
$262.95
Comp Cams cam phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm Engine oil is pressure-fed to the phasers through passageways in the cylinder heads and cams. The engine computers control solenoids that adjust this oil flow into and out of the phasers' control chambers, creating the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap. COMP Cams cam phaser limiter kits restrict the range of cam timing movement (14 degrees for Chrysler, 20 degrees for Ford, and 22 degrees for GM), thus providing the necessary valve clearance for serious performance cams with tighter lobe separations--all while utilizing the benefits of VVT technology. Gain some serious upper rpm power without sacrificing bottom end or mid-range performance with Comp Cams cam phaser limiter kits.
( 6 )
$281.95
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 27 )
$281.95
—
$303.95
COMP Cams 3-piece billet aluminum timing covers not only look good, but they work good, too. Save time and the hassle of breaking the oil pan seal when you need to change or adjust your timing chain or belt. Even with a thrust button, most stock stamped front covers flex under pressure, causing erratic ignition timing. These covers feature a rigid billet aluminum design that is strong enough to eliminate this flexing problem, hold your cam in place, and keep your timing in control. Endplay adjustment is made easy thanks to an access hole for the dial indicator. Plus, the 3-piece design allows your camshaft to be replaced without disturbing the oil pan seal or removing the harmonic damper. The covers use the same replacement hardware as the 2-piece models. In addition, some of these covers feature integrated time chain tensioner sets and quick-set cam correct and thrust adjustment.
( 18 )
$379.95
COMP Cams Performance Series solid lifters are specifically designed for high-end street and race applications. They feature a precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability. The lightweight design and premium one-piece pushrod seat provide an extended rpm range, and their accurately located oil band yields a consistent, properly metered oil flow.
( 23 )
$292.95
—
$303.95
Finally, you can get high performance without a high price with COMP Cams High Energy diecast aluminum rocker arms. COMP Cams is a leader in valvetrain technology and has developed these High Energy rockers to provide a superior strength to weight ratio to withstand the hardships of your street performance and mild race engines, while adding valve lift. These diecast aluminum, larger-than-stock rocker bodies are designed to be stiffer and more durable. They feature needle-bearing fulcrums and roller tips to reduce friction and lower oil temperatures for even more horsepower potential. Maybe you're on a budget, or maybe you just appreciate getting the most for your coin; make an affordable choice without sacrificing performance--get COMP Cams High Energy diecast aluminum rocker arms.
( 217 )
$270.95
If being able to adjust your cam timing quickly and easily is a top priority, then COMP Cams Ultimate Adjustable billet timing sets could be the answer. They have 2-piece billet steel cam sprockets, which let you change cam timing without removing the degree wheel or releasing the valvetrain load, and there's no cam bushing to break. Timing can be varied from 6 degrees retarded to 6 degrees advanced. Chains are heavy-duty, double-row types with hefty 0.250 in. rollers. A one-piece roller thrust bearing handles unwanted end loads.
( 7 )
$271.95
—
$277.95
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 10 )
$489.95
Even with a thrust button, most stock stamped front covers flex under pressure, causing erratic ignition timing. COMP Cams 2-piece billet aluminum timing covers are strong and rigid enough to eliminate this flexing problem, hold your cam in place, and keep your timing in control. Endplay adjustment is made easy, thanks to an access hole for the dial indicator. Plus, the 2-piece design allows your camshaft to be replaced without disturbing the oil pan seal, making for a much more user-friendly unit.
( 16 )
$368.95
—
$390.95
The Comp Cams Performance Series lifters with EDM injection technology have all of the same high-quality features as our performance series lifters with the addition of the 0.0120 in. EDM oiling hole on the lifter face. The precision-ground crown radius and surface finish promote performance camshaft compatibility and high RPM durability. These lifters are lightweight and feature a one-piece pushrod seat to provide an extended RPM range for your performance engine. EDM series lifters are ideal for high-end street or race engines.
( 3 )
$303.95
COMP Cams Endure-X roller lifters set the standard for solid roller lifter technology. The hydraulic roller lifters are designed with oiling and inboard link bars, they're engineered to withstand the demands of aggressive cam lobe designs and increased RPM ranges. The lifters feature a wear-resistant tool steel axle, precision sorted needle bearings, and most applications include EDM oil injection technology that guarantees the bearing assembly receives a constant flow of oil. Endure-X solid roller lifters are heat treated, machined to ultra-high tolerances, and fully rebuildable.
( 40 )
$515.95
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 324 )
$250.95
—
$341.95
COMP Cams straight tube pushrods feature an extra-thick .125 in. wall and an ultra-rigid large 7/16 in. diameter design that prevents the damaging valvetrain vibrations that occur when smaller diameter pushrods snap back into position. These straight tube pushrods are offered in a variety of lengths and are precision-made with high-strength materials for consistency and accurate geometry. Selecting the correct pushrods is critical for proper valvetrain operation. You can count on COMP Cams for the quality components you need to keep your engine running right!
( 4 )
$253.95
—
$262.95
These COMP Cams Hi-Tech 210 degree pushrods were specifically designed for high-lift applications where pushrod and seat interference are problems at maximum lift. They're heat-treated to a minimum hardness of 60 on the Rockwell C scale, for the ultimate in strength. COMP Cams even gives them a black oxide finish and imprints the length and part number on them. In addition, they feature a 210 degree radius, rather than the standard 180 degree radius, so they'll work great with rocker arms that feature cup-type adjusters and applications requiring more load-bearing surface from the pushrod. If you are building a high-horsepower, high-rpm, high-lift camshaft engine, then you need to use these COMP Cams Hi-Tech 210 degree pushrods for maximum reliability.
( 7 )
$261.95
—
$280.95
On Sale
COMP Cams dual taper pushrods feature a unique dual taper for high strength and lightweight construction. They are manufactured from special steel alloy and utilize a 210-degree tip for an increased load-bearing surface. COMP Cams dual taper pushrods feature a .165 in. wall thickness to withstand today's high-pressure valve springs.
( 3 )
$301.95
—
$348.95
COMP Cams's XD-A pushrods offer a game-changing method for accurately setting lash or pre-load while using non-adjustable-style rockers. These patent-pending pushrods incorporate a top section that slides 2 in. inside a wider bottom section, with one or two shims captured in-between. Proven to 9,000-plus rpm in solid roller LS applications, the system provides a 90 percent increase in bending stiffness for enhanced valvetrain stability. It also allows for lightening of a rocker arm system by 30-plus grams on the backside by removing the adjuster and required support area for threads and seating. The use of lighter rockers with XD-A adjustable pushrods allow higher rpm to be achieved by creating a much more dynamically stable valvetrain system. COMP Cam XD-A pushrods are designed especially for engines with low-mass rocker arms and a light valvetrain with drop-in fitment in LS engines. They can be adjusted over a range of .172 in. in .004 in. increments with shims. Choose the pushrods with the adjustment range needed for your setup.
Not Yet Reviewed
$276.95
COMP Cams keyway adjustable billet timing sets are an exceptional choice for your street or race vehicle. Whether you're building, replacing, or upgrading, these sets will deliver the performance you need. The chains are available in single- and double-roller style—and are designed for fitment on a wide range of engine-specific applications. Features include: * Induction-hardened steel billet gears for durability * 9-keyway crank sprocket for 2-degree incremental adjustability, 8-degree maximum advance/retard * Pre-stretched, heat-treated single or double roller chain with heavy-duty large pin design * Includes Torrington roller thrust bearing for reduced friction
( 89 )
$431.95
Get all of the performance and none of the worries with Howards Cams Max Certified cam and lifter kits! These kits include a 100 percent in-house ground, top-quality Howards camshaft, tested and verified on an Adcole 911NT. You can be confident that you're getting the finest cam for your application! Matching hydraulic flat tappet lifters and a bottle of Max ZPM break-in oil additive round out the package. Best of all, if you experience a cam-damaging event, you're covered! Howards Cams Max Certified cam and lifter kits feature their Max Certified 5-year warranty! Simply fill out the supplied warranty card and return it with the cam, lifters, and receipt to Howards Cams for complete coverage!
Not Yet Reviewed
$362.99
Dorman variable valve timing solenoids will restore the fuel efficiency and normal operation of your vehicle. These direct replacement solenoids are engineered from quality materials for a proper fit and years of effective performance. They easily plug into the electrical harness and come conveniently packaged with the installation gasket (where applicable). Maintain proper oil flow and pressure with Dorman variable valve timing solenoids.
( 27 )
$388.99
Driven Racing Oil assembly grease is used by some of the top engine builders because it is a name they know and can trust. It provides proven extreme-pressure protection for heavily loaded parts during initial break-in. The unique formula completely dissolves in oil. Driven Racing Oil assembly grease can be used to prelube cams and lifters, and applying it to the piston ring land prevents micro welding during initial engine break-in. It can also be used on wrist pins, distributor gears, pushrods, and valve retainers.
( 52 )
$403.08
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
