Availability
On Sale
Get fuel where you need it to go using one of these FiTech fuel delivery kits. They include an upgraded 255 lph external electric fuel pump for engines making up to 600 hp. A 20 ft. section of EFI grade fuel hose is provided—suitable for both inlet and return hoses between the fuel tank and the engine. The FiTech fuel delivery kits also feature two billet aluminum fuel filters, push lock hose ends, and a mounting clamp for the electric pump.
( 20 )
$297.00
$267.30
On Sale
B&M Master Racing overhaul kits are supplied with all of the gaskets, seals, bushings, and friction material required for a complete high performance or racing transmission overhaul. The friction material and steel provided in the kits are B&M's high performance components. They do not include valve body components, except for OEM valve body gaskets. Instructions are not included.
( 17 )
$449.95
$403.95
On Sale
Low Range Off-Road steering knuckle rebuild kits contain the replacement parts needed to successfully service steering knuckles. Available for a variety of makes, models, and axles, LROR has chosen the best quality components and does not sacrifice quality for price. While competitors' kits may include only the bare essentials, Low Range Off-Road includes the parts often missing from other kits. Their Ultimate knuckle rebuild kits include upgraded seals, high-quality Koyo bearings, and more. LROR even includes the specialty tools needed to complete the job. Simply put, they are the best, most complete knuckle rebuild kits available. One kit covers both sides of the axle and most kits are available with or without wheel bearings. Low Range Off-Road knuckle rebuild kits typically include (varies by application): * Gaskets * Inner axle seals * Bearing seals * Knuckle seals * Hub seals * Trunnion (kingpin) bearings * Backing plates or backing plate eliminators * Spindle bushings * Spindle nuts and washers * Trunnion shims * Steel outer felt covers—not found in most other kits * Hub dial O-rings Notes: * Since they're not included in all kits, wheel bearings and spindle bushings should be checked when rebuilding the axle. * Some kits may contain Timken or Schaeffler/FAG bearings when Koyo bearings are not available. * Hub gaskets are sold separately for some applications.
Not Yet Reviewed
$453.88
$385.80
On Sale
B&M Transkits give you the same high-quality components that are used in all B&M Street and Strip transmissions. They include high performance friction materials, a complete overhaul gasket set, a drain plug kit, and all of the parts necessary to convert your valve body into a full manual/automatic valve body. These improvements enhance shift feel, while retaining full automatic features. The Transkits come complete with full instructions on how to assemble your transmission to B&M specifications (except BMM-70232 and BMM-70233). They also include special directions on how to modify your case, pump, and components.
( 44 )
$449.95
—
$499.95
$403.95
—
$448.95
On Sale
Trail-Gear offers transfer case rebuild kits for a variety of applications, including many Toyota and Suzuki trucks from the 1970s, '80s, and '90s. Kits contain all minor gaskets, seals, and bearings for Toyota gear-driven transfer cases from 1979-95. Only top-quality Toyota OEM gaskets are used. Bearings include SKF, NSK, NACHI, and KOYO. Does not include flange nuts, or needle bearings.
Not Yet Reviewed
$349.99
—
$499.99
$297.49
—
$454.99
On Sale
Hurst Competition/Plus shifters have been the benchmark of transmission control and race-proven since 1963. When you are ready to install one, be sure to choose the correct kit for the right fit. Hurst Competition/Plus shifter installation kits are custom designed to fit directly into your vehicle, with the least possible modifications, and to give you firm positive shifts every time. They come with everything necessary (shifter not included) to install your Hurst Competition/Plus shifter in your car. Features: * All parts, hardware, and installation instructions * Hardened steel shift linkage rods * Nylon bushings and spring clips * Shifter mount plate
( 213 )
$299.95
—
$425.95
$269.95
—
$382.95
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 51 )
$482.95
—
$699.95
$384.95
—
$471.95
On Sale
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$350.00
—
$553.00
$315.00
—
$497.70
On Sale
Summit Racing™ double-adjustable ladder bar kits are built for strength, consistency, and ease of adjustment. Fabricated from 1 in. diameter DOM tubing, these 32 in. bars come complete with all hardware--including 3/4 in. heims--and use a large 3/4 in. front bolt. The double-adjustable link allows you to make quick pinion angle and preload adjustments without removing the bars from the car. Easy to install and simple to adjust, nothing hits the tires like a Summit Racing™ double-adjustable ladder bar suspension. Installation by a certified welder is recommended. Additional product details: * Durable black powdercoat finish * Rod end safety loops included * 3/4 in. rod ends, adjusters, jam nuts, and Grade 8 hardware * 3/16 in. weld-on housing brackets * Set up for 32 in. from center of housing to center of rod end
( 3 )
$329.99
$296.99
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$362.95
—
$549.95
$274.95
—
$470.95
On Sale
For the ultimate in performance, feel, and dependability, mount your Street Super shifter with the appropriate Hurst installation kit. The shifters mount high on the transmission allowing the shift arms to be almost completely straight for added strength and leverage when racing. Hurst Street Super shifter installation kits include the necessary mounting plate, shift arms, hardened steel shift linkage rods, rod adjusting buttons, nylon bushings, spring clips, necessary hardware, and instructions.
( 13 )
$318.95
$287.05
On Sale
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$262.99
—
$524.99
$261.12
—
$474.99
On Sale
Holley EFI fuel system plumbing kits are the perfect complement to your Sniper EFI or Holley EFI kit. These plumbing assemblies are engineered using Holley fuel pumps, regulators, and filters—coupled with Earl's Performance plumbing, to provide a fuel system tailored to your vehicle's specific needs. Components vary, depending on the kit you select.
( 34 )
$368.95
—
$528.95
$332.05
—
$475.95
On Sale
Maximize your engine's performance with Airaid SynthaMax CAD cold air intake kits. The cold air dam design seals directly to the hood and isolates engine heat away from your intake, allowing cooler air to run through the system. These cold air intake kits feature dual-layered SynthaMax filters, constructed using the finest 100 percent synthetic materials for unrivaled filtering efficiency. Servicing the filters is easy with oil-free maintenance—simply wash them in a mild household detergent and rinse. Airaid SynthaMax cold air intake kits are built with a hand-poured urethane body that won't crack, curl, or shrink. They use the stock air filter location, but add a boost with a huge air inlet that keeps more cold air flowing through the 360 degree filter. Hundreds of models are available for a wide range of vehicle applications. Maximize your horsepower, torque, and fuel efficiency with Airaid SynthaMax CAD cold air intake kits.
( 27 )
$314.99
—
$524.99
$264.99
—
$474.99
On Sale
Holley air bleed assortment kits are a must when track-tuning a 4500 Dominator HP carb for maximum performance. They include four of each air bleed size from 23 to 79, and feature 10-32 UNF threads.
( 6 )
$349.95
$314.95
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$469.95
—
$603.95
$258.95
—
$448.95
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$342.99
—
$524.99
$299.99
—
$474.99
On Sale
Brothers Trucks one-piece window kits for your classic Chevy/GMC truck eliminate the vent window, giving your truck a smooth appearance and great operation. The special cut glass provides complete sealing around the window, and is painstakingly designed for easy installation and use. Most kits will do both doors and are available with clear or tinted glass. Brothers offers power conversion kits complete with switches, as well as kits for manual and existing power window applications. Brothers Trucks one-piece window kits include glass, felt channels, glass scraper set, hardware, and any other parts that may be needed. Choose the kit designed for your truck.
( 9 )
$549.95
$493.95
On Sale
Momentum Pro 5R air intake systems from aFe are designed around a large pre-oiled 7.5 in. tall, oval, cotton media filter with five layers of progressively finer mesh to maximize performance. These incredible filters fit into equally impressive one-piece housings with auxiliary air scoops and large clear sight windows. When combined with the housings, these aFe air intake systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro 5R air intake systems.
( 12 )
$361.00
—
$475.00
$324.90
—
$427.50
On Sale
K&N 77 Series high-flow performance cold air intake kits are aftermarket air induction kits designed for trucks and sport utility vehicles. They include a free-flowing, mandrel-bent intake tube (various materials and color options) with a Million Mile Warranty. K&N 77 Series cold air intake kits replace your restrictive factory air filter and intake housing, maximizing your power and acceleration. They include a washable, reusable air filter and offer guaranteed performance for their vehicle applications.
( 479 )
$392.99
—
$524.99
$349.99
—
$474.99
On Sale
Spectre muscle car cold air intake kits deliver the power-increasing technology that race cars and modern cars have employed for some time. A company rooted in racing with a definite bias toward early muscle cars and speed, Spectre has designed simple, universal cold air intake systems for your specific ride. Available for many applications, these intake kits let you choose the location to draw the cold air from—the wheel wells, cowls, front gravel shields, or even the high-beams—with the optional headlight scoops. The more cold air you take in, the more power you make. Spectre cold air intake kits help to reduce the incoming air temperature by introducing fresh cold air to the engine for incredible power gains; and since your engine won't need to work as hard, there's the added benefit of improved gas mileage. Order the model designed for your muscle car application.
( 32 )
$399.99
$374.99
On Sale
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$368.99
—
$679.99
$322.70
—
$557.20
On Sale
Hays Street 450 clutch conversion kits are an excellent upgrade offering up to 30 percent more holding power (clamping force) over your stock clutch. They're designed for handling stock to mildly modified engines—up to 450 horsepower. If drivability along with a stock pedal feel are the leading factors for your application, then order the Hays Street 450 clutch conversion kit recommended for your specific vehicle and engine size. Features, items, and specs: * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded damper springs * Pressure plate * Clutch disc * Throwout bearing * Alignment tool * Instructions
( 8 )
$475.95
—
$573.95
$283.95
—
$493.95
On Sale
Truck owners are very impressed by the lineup of Trail-Gear Rock Assault Ram steering assist kits. For example, the Toyota kits feature a selection of various-sized stroke hydraulic rams--with high-temperature inner and outer seals for long life and no leaks. Each ram includes a 3/4 in. rod that's a full 50 percent stronger than other rods on the market. The specially formed 1/4 in. heavy-duty plate steel brackets make installation a snap. Here are the parts included in most Trail-Gear Rock Assault Ram steering assist kits: * Ram with high-temperature inner and outer seals * Rod ends with jam nut * Ram bracket for axle housing * Ram bracket for tie rod * Two hoses * Two JIC 90 degree elbows * Two 1/4 in. NPT x #6 JIC steering box fittings * Mounting hardware * Instructions with photos These kits do require: * Trail-Gear High Steer crossover steering with 1.25 in. tie rod * Tapped steering box
( 3 )
$449.99
$382.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
