Availability
On Sale
Holley EFI fuel system plumbing kits are the perfect complement to your Sniper EFI or Holley EFI kit. These plumbing assemblies are engineered using Holley fuel pumps, regulators, and filters—coupled with Earl's Performance plumbing, to provide a fuel system tailored to your vehicle's specific needs. Components vary, depending on the kit you select.
( 34 )
$368.95
—
$528.95
$332.05
—
$475.95
On Sale
Holley Sniper EFI Stealth fuel crossover kits are designed to be used with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems. These pre-assembled fuel crossovers are designed to provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. Available in two variations, both contain a braided fuel hose with crimp-on ends for a leak-free installation and two fuel bowl standoffs. One variation includes a T-fitting and the other a black anodized billet fuel regulator, preset to 58.5 psi, and a mounting bracket.
( 1 )
$319.95
$287.95
On Sale
Aeromotive PTFE stainless braided fuel lines are ideal for street and racing applications where E85, gasoline, or methanol compatible fuel hose is needed. The stainless outer braid provides impact and abrasion resistance to protect the PTFE inner liner. These liners are specially carbonized for conductivity, which is critical for fuel handling. The fuel lines provide outstanding flow capacity; they're smaller on the O.D. for the same I.D. of a comparable rubber braided line for easier routing in tight spaces. The lines deliver extended service life in any fuel, as they will not harden, micro-fracture, or permeate fuel vapor (vapor-walk) like normal rubber braided line—minimizing fuel smell in the vehicle storage area. Choose the length and AN diameter needed for your application.
( 9 )
$278.50
—
$513.50
$250.65
—
$462.15
On Sale
Aeromotive dual-action adjustable fuel logs incorporate new features previously unavailable. Each carburetor inlet uses a ball and socket assembly that swivels 20 degrees, allowing additional clearance for throttle stops, throttle linkage, and other accessories. They offer a healthy inlet that can feed high-horsepower engines and feature manufacturing from quality materials and a strong finish, providing durability and great looks. They also provide dual NPT ports (machined in) that allow you to install fuel pressure gauges or pressure transducers. Set a new standard for your ride with the Aeromotive dual-action adjustable fuel logs quality-engineered to fit!
( 4 )
$452.50
$407.25
On Sale
Top racing teams depend on Earl's Perform-O-Flex hose. It features an inner liner of Temprel synthetic rubber, a partial-coverage protective sheath of stainless steel braid embedded in the liner during manufacturing, and a full-coverage outer protective sheath of high-tensile stainless steel wire braid. It can withstand an operating temperature range of -40 degrees F to +300 degrees F, and still deliver you to the winner's circle. Perform-O-Flex hose is compatible with most fuel, oil, and water; and it's available in a wide variety of AN sizes, lengths, and diameters.
( 2 )
$849.95
$467.95
On Sale
Waterman Racing shut-off valves are valuable plumbing accessories. Constructed from aluminum with an anodized finish, the valves are available for different inlet/outlet sizes. Order the model needed for your application.
( 1 )
$357.99
—
$438.99
$322.19
—
$395.09
On Sale
Quicksilver marine fuel lines are durable, low permeation hoses that are gray in color to help reduce potential for vapor lock on warm days and exposure to sunlight. They are EPA compliant, and produced by Mercury Marine to stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser sterndrive. Available in different diameters, select the fuel line preferred for your boat's engine.
Not Yet Reviewed
$311.99
—
$483.49
$280.79
—
$435.14
On Sale
Earl's Performance Pro-Lite 350 hose is constructed from a tough, abrasion-resistant nylon sheathing banded to the textile inner braid that's embedded in the synthetic rubber liner. This gives the hose incredible flexibility, while maintaining the ability to withstand high vacuum and hot oil temperatures. The hoses are rated to withstand a maximum pressure of 350 psi and an operating temperature range of -40 to +300 degrees F. Pro-Lite 350 hose can take the most demanding conditions and still deliver you to the winner's circle.
( 24 )
$649.95
$357.95
On Sale
Summit Bucks
Boost Products USA reinforced silicone vacuum hoses are suitable for intercooler systems, intakes, water lines or similar. They can withstand up to 1 bar / 14.5 psi of pressure and temperatures from -40 to 430 degrees F (220 C). The wall thickness is 3.5mm. The silicone is highly durable and flexible, stable and retains its color even after many years of use. That's why many motorsports teams trust in Boost Products hoses. They are available in a variety of lengths, colors, and inner diameters. (Note: Silicone hose should not be used as fuel line, oil line or vacuum line for power brake systems.)
Not Yet Reviewed
$290.18
—
$469.93
$261.16
—
$422.94
On Sale
Aeromotive AN hoses feature a braided stainless steel lining that covers a durable inner rubber hose. They're available in various lengths and diameters for usage with engine oil, gasoline, or water. Depending on your selection, the hose can reach up to a maximum operating pressure of 1,500 psi. Aeromotive hoses come in multiple AN sizes; choose what's needed for your application.
( 2 )
$368.15
$331.34
On Sale
FUELAB offers braided PTFE AN hoses for a wide range of applications. These high-quality hoses feature braided stainless steel material, braided nylon outer material, and a PTFE lining. They're available in a variety of lengths and AN sizes to assist with your automotive plumbing projects.
Not Yet Reviewed
$330.00
$297.00
On Sale
Earl's Performance UltraPro hoses go way beyond "good enough." Why would you plumb your high performance, high-powered vehicle with traditional rubber hose, even if it's steel braided? Earl's UltraPro Series of stainless steel and polyester braided hoses are designed to withstand today's modern fluids, harsh environments, brutal vibration, flow requirements, and extreme pressures. You no longer need worry about frequent replacement, deterioration from fuels, and the safety hazards of vapors and leaks. And, UltraPro hoses are much lighter, more rugged, more flexible, and offer more flow. All of this, plus great looks, peace of mind, and a price that's hard to argue with—why wouldn't you choose Earl's UltraPro hoses for performance plumbing? Features of superior Earl's UltraPro hoses: * PTFE inner liner impervious to all known fuels, oils, and coolants used in automotive applications, is carbon-infused for static dissipation, and has ultra-low coefficient of friction to promote maximum flow * Double-helix ribbed inner hose liner offers extreme flexibility and full-flow, making tough plumbing jobs a snap with fewer hard connections * Liner is reinforced with an outside glass-fiber wrap for additional strength and integrity * Polyester braid hoses are up to 67 percent lighter, and the stainless steel braid hoses are up to 37 percent lighter than traditional rubber hose with stainless steel braid * Available in popular -6, -8, -10, -12, -16, and -20 AN sizes * Available in specific lengths and bulk to meet your application needs
Not Yet Reviewed
$649.95
$357.95
On Sale
Clearance
K&N charge pipes are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes are engineered to reduce turbo charged air pressure loss, as well as dramatically increase air flow from the turbo through the intercooler. Constructed from lightweight aluminum with a durable gunmetal gray powder coated finish, the charge pipes are easy to install with commonly available tools and they are backed by K&N's 10-year/million-mile limited warranty.
( 2 )
$367.99
$317.99
On Sale
The amazing HydraMat fuel pickups feature Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks, as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. The Holley HydraMat fuel pickups are the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. Holley HydraMats are available in various sizes and shapes to fit a wide variety of stock fuel tanks and/or race fuel cells. Features and benefits: * Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells * Greatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and/or engine stalling * Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions * Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells * Not for use with diesel fuels
( 64 )
$309.95
—
$499.95
$278.95
—
$448.95
On Sale
Holley boost control solenoids are designed for optimal performance when using the boost control function of Holley EFI. Some setups require two solenoids and some require one. They're driven by a Pulse Width Modulated (PWM) output of the ECU. It is advised NOT to use the PWM+ outputs on a Holley HP ECU, but rather use the PWM- outputs. If you have a Holley Dominator ECU, use either the PWM- outputs or a PWM+ output on the J2B connector.
( 4 )
$449.95
$403.95
On Sale
Holley bypass fuel pressure regulator kits are part of a complete line of fuel system products from Holley. Offering several different kits, each features a billet or diecast aluminum regulator with an adjustable psi for precise fuel pressure changes and they are finished for corrosion resistance and good looks. The regulators are fitted with a 1/8 in. NPT gauge port and include an Earl's fuel pressure gauge, three adapter fittings, a barbed fitting for the vacuum port, a mounting bracket, and all necessary hardware. Choose the kit to best fit your project's needs and performance.
( 30 )
$299.95
—
$349.95
$269.95
—
$314.95
On Sale
Fluidyne fluid coolers are at their best when the heat is on. They set the standard in performance, reliability, and durability—but what else would you expect from one of only two companies authorized by NASCAR to supply their "Spec Rad"? The coolers are available in a variety of sizes and configurations for universal, direct fit, and specialty applications. Depending on model, features include: * Most are available in single-pass or double-pass configurations * CAB-brazed construction (no epoxy) * Extruded oval tubes and patented lanced offset flow turbulators * Most efficient coolers pound-for-pound on the market
( 5 )
$326.00
—
$456.00
$260.80
—
$364.80
On Sale
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$338.95
—
$415.95
$305.05
—
$373.95
On Sale
Holley universal, in-line fuel pumps are intended for fuel injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They're all rated for continuous duty service and have been tested up to 2,500 hours. The high-output versions are great for serious performance work. These pumps should be mounted below the fuel level of the tank for a good gravity feed on the inlet side. Features include: * OE-proven design * Lightweight and compact * Fits most EFI applications including turbo and supercharged * Not for use on aircraft of any type
( 41 )
$318.95
$287.05
On Sale
Keeping oil temperatures down is essential to minimize wear and tear—and prolong the life of expensive powertrain components. A Fluidyne oil cooler with fan kit is one of the best ways to give your engine and transmission that protection. These efficient units are built to handle the most demanding conditions. They're fitted with 12 V high-flow fans for fast, efficient output. Order the size that's compatible with your vehicle application.
Not Yet Reviewed
$502.00
$401.60
On Sale
NOS offers DOT-approved nitrous bottles in a variety of sizes and finishes to suit your needs. The bottles come with an NOS/CGA-approved high-flow valve and built-in siphon tube. For extra safety, NOS has designed an exclusive blow-off venting system. If your bottle is overfilled or if pressure increases beyond the maximum safety level, the vent opens and discharges the nitrous into a safe place.
( 17 )
$624.95
$343.95
On Sale
Aeromotive carbureted adjustable fuel pressure regulators are excellent upgrades from the popular standard 2-port designs. These regulators re-seat after the needle shuts down, preventing pressure creep. They're ideal for carburetor and dedicated nitrous applications where higher flow, quicker response, and less pressure creep are desired. A mounting bracket is included. The units are available with different inlet/outlet options, as well as pressure ranges.
( 72 )
$380.35
$342.32
On Sale
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$380.95
$342.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
