Availability
Showing In Stock Items. Show All 126 Items.
On Sale
RideTech adjustable panhard bar and lowering block kits include a full-length adjustable panhard bar and lowering blocks. These kits will allow you to secure your axle in place for more predictable handling, while the lowering blocks are designed to help reduce ride height for more stable cornering. Incorporating the panhard bar mount into the lowering block allows for the use of a longer bar and corrects the bar geometry to minimize lateral axle movement and allows the axle to be centered at a lowered ride height. This also lowers the roll center to reduce body roll. The patented R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!
Not Yet Reviewed
$435.00
$391.50
On Sale
If you're looking for fun and good looks with a head-turning pickup that you can depend on tomorrow and for years down the road, then Belltech lowering kits are the right suspension choice. Each suspension system that they offer is specifically designed to work and fit properly on your vehicle.
( 91 )
$282.00
—
$576.00
$253.80
—
$518.40
Race cars ride low to the ground for greater agility, handling, and cornering. Obtain this physics-defying stance with Belltech lowering kits with Nitro Drop 2 shock absorbers. The completely redesigned Nitro Drop 2 shocks fuse internal valve technology with state-of-the-art construction to achieve superlative performance characteristics. They drop your center of gravity for nimble steering, diminished squat, and eye-popping looks, while producing maximum durability with quality-driven dust boots and rubber bushings. Nothing could be better than capturing unsurpassable performance with the ease of an OEM replacement!
( 67 )
$454.50
—
$525.60
On Sale
Belltech lowering kits with Street Performance shock absorbers properly lower your sport truck or SUV--the first time. Not only that, they provide you with all the components you need to achieve the look you want, as well as the alignment, performance, and safety you need! All of these kits feature Belltech premium twin-tube Street Performance shocks that set the standards for performance handling. Each lowering kit is model-specific and assures proper fit and function today, tomorrow, and years down the road on your vehicle. Tune your rig with the performance of Belltech lowering kits and Street Performance shocks.
( 113 )
$564.00
—
$601.00
$507.60
—
$540.90
On Sale
Lower your car properly with UMI Performance lowering springs. The front springs are wound from 5160 chrome silicon wire, while the rear springs are made from 9254 chrome silicon. The linear spring rates of each provide a firm but comfortable ride with exceptional handling. Suitable for Pro-Tour, Autocross, and general cruising, these lowering springs are finished with a tough black powdercoat and are available for the front, rear, or in kits with both. Order the parts designed for fitment with your vehicle's suspension. Not all springs are alike—the proof is UMI Performance lowering springs.
( 138 )
$299.99
—
$449.99
$269.99
—
$404.99
On Sale
UMI Performance rear non-adjustable upper and lower control arms are designed to give you the best of both worlds. Whether you're a weekend cruiser or a weekend track addict, we've got you covered. While adding ride improvements, they also work great for reducing traction loss. These control arms are direct bolt-on replacements designed to minimize wheel hop, improve cornering, and help with track consistency. The lower control arms are supplied with sway bar mounting holes designed for your stock sway bar and most aftermarket bars. Additional features include: * Built using 1.625 in. o.d. x 0.120 in. mild steel tubing * CNC-machined for precision tolerances and accuracy * Fully TIG and MIG-welded construction * Durable powdercoated finish
( 106 )
$369.99
$332.99
On Sale
For those looking for a little bit more aggressiveness in handling and appearance, Eibach Sportline lowering springs are the answer. Sportline is the extreme-performance spring set created for the extreme enthusiast, one who craves maximum street performance—with the lowest possible drop—and the exceptional ride quality you expect from Eibach. Grab all the benefits of the legendary PRO-KIT, but with a little "hot sauce"! Order the springs recommended for your vehicle. Product features: * Race car-like handling by radically lowering your car's center of gravity * Dramatically reduces squat during acceleration, body roll in corners, and nose-dive under braking * Lowers vehicle anywhere from 1 in. to 2.5 in. (depending on application) * Progressive spring design for excellent ride quality * Million-mile manufacturer's warranty
( 138 )
$355.00
$284.00
On Sale
UMI Performance adjustable upper and lower control arms include tubular single adjustable lower and on-car adjustable upper control arms. These control arms are direct replacements for the OEM setup. They add strength, ride improvement, and most importantly, rear-end adjustment. Additional features include: * 1.500 in. x 0.120 in. mild steel tubing * TIG-welded 4140 chromoly tube adapters * Complete arm features TIG-welded construction * Polyurethane greasable bushings * Durable, long-lasting powdercoated finish * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod end
( 18 )
$519.99
$467.99
On Sale
BMR lowering springs are designed to improve handling performance by lowering your ride's center of gravity for tighter suspension and reduced body roll and wheel well gap. Cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss, these suspension components are designed for additional spring rate in the stiffer portion of the coil for perfect handling during aggressive cornering. Dozens of lowering spring models are available with various front and rear drop measurements. Select the springs tailored for fitment on your vehicle.
( 490 )
$279.95
—
$389.95
$251.96
—
$350.96
Belltech Pro Coil lowering spring kits provide two lowering height options to gain the perfect stance. You figured out what lowering you want to match your wheel and tire combination, but afterwards you decided you would like to go an inch lower. No problem. Belltech's Pro Coil kits includes their high-quality coil springs and engineered vehicle specific upper spring or strut mount spacers, allowing you to change your mind and your vehicle's stance.
( 67 )
$253.80
—
$303.30
Belltech lowering coil springs are designed to lower your car or truck from 1 to 4 in., depending on the springs you select. Each coil is made from chromium alloy steel and is wound, shot-peened, and then powdercoated to exacting specifications--ensuring the proper ride height, ride quality, and longevity.
( 74 )
$258.30
On Sale
Eibach's Pro-Kit lowering springs are the most popular springs they make—and there's a reason for that. These springs reduce fender gap to give your vehicle a lower, more aggressive stance. Plus, they help to lower the center of gravity to improve handling during acceleration, cornering, and braking. Best of all, you can lower your vehicle without having to change your shocks. Eibach Pro-Kits give you high performance handling and aggressive good looks. They can be ordered individually, in pairs, or as a full vehicle set. Select the model designed for your application.
( 188 )
$350.00
—
$499.00
$280.00
—
$399.20
On Sale
Responsible for locating the axle, setting pinion angle, and controlling rear-end movement, leaf springs are a critical part of the rear suspension. BMR Suspension lowering leaf springs are superior to stock leaf springs that sag, rust, and do little to control axle wrap and wheel hop as they get older. BMR's spring design, combined with precise clamp locations, give you less wheel hop and more axle control. Their design reduces axle wrap that causes the spring to load and unload. By eliminating this oscillation, wheel hop is minimized and traction is improved. BMR lowering leaf springs are engineered for street performance, drag race, and handling applications. Not only a great way to add an aggressive look, they also improve handling by lowering the rear center of gravity and reducing body roll. New rubber bushings in the front give you a smooth, quiet ride, and polyurethane rear bushings greatly reduce deflection. They also come with PTFE antifriction pads for smooth, quiet travel throughout the spring's range of motion, which further reduces noise, vibration, and harshness. Combine BMR lowering leaf springs with BMR front lowering springs for a level, aggressive stance with huge improvements in handling and performance.
( 10 )
$479.95
$431.96
On Sale
UMI adjustable extended length lower control arms are designed to properly center the rear wheels in your Impala SS wheelwells. Here's how they work--the control arms extend 5/8 in., but the adjustment allows you to lengthen or shorten them an additional 1/4 in. to perfectly center your car's rear-end. Built from 0.120 in. thick DOM steel tubing, these adjustable lower control arms are CNC-machined and contoured for exact tolerances and accuracy. The control arms attach to the rear-end using chromoly PTFE-lined spherical bearing rod ends, which operate bind-free when high handling is a concern and feature the correct provisions for adding stock or aftermarket sway bars. Get traction and control without road noise by installing UMI Performance adjustable extended length lower control arms.
( 3 )
$349.99
$314.99
On Sale
BMR lowering spring kits will improve your ride's handling performance by lowering its center of gravity for tighter suspension and reduced body roll and wheelwell gap. BMR lowering springs are cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss. They're designed for additional spring rate in the stiffer portion of the springs, perfecting the above during aggressive cornering. BMR lower spring kits include front and rear springs to optimize the balance between performance and comfort and give you that precision sports car look and feel.
( 33 )
$279.95
—
$359.95
$251.96
—
$323.96
On Sale
UMI Performance rear adjustable upper and non-adjustable lower control arms are direct replacements for the OEM setup. They add strength, ride improvement, and most importantly, rear-end adjustment. UMI Performance rear adjustable upper control arms are constructed from aircraft-quality 4140 chromoly steel and feature TIG-welded construction. The upper control arm mounting points feature CNC-machined 0.250 in. mild steel, 4140 chromoly tube adapters, and a high-strength, 4140 chromoly, heat-treated, 1.000 in. solid adjuster. UMI Performance rear lower control arms feature CNC-machined 0.120 in. wall thickness mild steel tubing, fully TIG-welded construction, greasable polyurethane bushings, and Zerk grease fittings. Additional features include: * On-car adjustability * 4140 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined 6061 aluminum step bushings * Durable powdercoated finish
( 17 )
$469.99
$422.99
On Sale
REKUDO front lower control arms are one part of a fully engineered suspension system for the 1970-81 Chevrolet Camaro and Pontiac Firebird. The systems are modern auto-cross inspired suspensions that retain the OE appearance and strength with stamped steel control arms. REKUDO front lower control arms feature an EDP coating, heavy-duty ball joints, offset washer inserts for easy caster adjustment, and factory-style rubber bushings. Gain better performance and an improved camber curve with REKUDO front control arm systems. Features: * Lowered center of gravity with improved handling * Easy caster adjustment with offset oval shaped washers that fit into the upper control arm pivot shafts—proper caster setup improves stability and driver confidence on corner entry * Heavy-duty ball joints and rubber bushings are pre-installed * Black EDP (Electro-Deposit Primer) coating for corrosion protection * Easy bolt-on installation utilizing the factory mounts Please note: * Must be used with tall spindles RK600-02 and 1968-82 C3 Corvette brakes. Ideal for use with all other REKUDO Suspension System components for the 2nd Gen F-body * Optional Delrin® bushings available separately (RK100-20) * C3 Corvette-style brakes require 15 in. minimum diameter wheels
Not Yet Reviewed
$605.95
$333.95
On Sale
UMI Performance single adjustable lower control arms are direct bolt-on replacements designed to minimize wheel hop and improve cornering, while lowering ETs. UMI Performance single adjustable lower control arms are constructed from a DOM mild steel tubing 1.500 in. o.d. x 0.120 in. wall and a 4130 chromoly threaded tube adapter. They are completely CNC-machined and fully TIG-welded for outstanding strength. UMI Performance single adjustable lower control arms feature reinforced spring perches and heavy-duty sway bar mounting points. Their high-quality, PTFE-lined spherical rod end allows for quiet, "bind-free" performance, making them great upgrades for both your track and autocross driven cars. The polyurethane bushings are designed to be bolted to the car chassis for quiet, comfortable operation. The control arms feature polyurethane bushings, zinc plated steel sleeves, and "on-car" greasable Zerk fittings. Additional features include: * QA1 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod end * CNC-machined 6061 aluminum step bushings with zinc plated steel sleeves * Powdercoated finish * Use OEM hardware
( 27 )
$279.99
—
$299.99
$251.99
—
$269.99
On Sale
UMI Performance double adjustable lower control arms feature 100 percent TIG-welded fabrication using drawn-over mandrel tubing. UMI Performance double adjustable lower control arms also have spherical bearing rod ends, which offer "bind-free" operation by letting the suspension articulate correctly when high handling is a concern. These control arms also work great as solid bushing drag race control arms with easy, built-in adjustment. Quick and easy on-car adjustments can be made, if needed, with a simple turn of the wrench. When you are looking for maximum performance from your vehicle, you can't go wrong with this setup. Additional features include: * 1.250 in. x 0.120 in. steel or chromoly tubing * 4140 chromoly threaded tube adapters * 3/4 in. hard chrome plated, PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined 6061 aluminum step bushings * On-car adjustability using right and left hand threads * Durable powdercoated finish
( 13 )
$369.99
—
$399.99
$332.99
—
$359.99
Belltech lowering mutli-pack leaf springs are designed to easily lower the rear of your leaf spring equipped Sport Truck or SUV by up to 4 in., depending on application, while still retaining a factory ride quality. By articulating the arch of the leaf spring, they provide the appropriate spring rate for a lowered ride height and utilize the latest manufacturing techniques. All leaf springs are powdercoated and come complete with OEM bushings and sleeves. Order the Belltech leaf springs that are suited to fit your needs.
( 96 )
$337.50
On Sale
The C4 was introduced in 1984 and continued until 1996. There were over 350,000 sold worldwide. The C4 Corvette continues to be a popular choice among the autocross/track day community. The mix of availability, 4-wheel independent suspension, 96 in. wheelbase, and low entry cost makes these cars a great investment for many auto enthusiasts. If you're searching for help planting your car to the ground, look no further. RideTech offers a variety of systems to update these cars to modern handling track machines! Whether you want to add a few hundred horsepower or are just looking for great ride quality on your way to church…Ridetech has you covered. RideTech C4 Corvette rear lower control arms feature: * Incorporates Delrin bushings and R-Joint technology * Eliminates deflection, compared to factory rubber, maintaining consistent alignment for precise handling * Eliminates added stiction associated with rubber and polyurethane * Retains factory camber adjustments via cam bolt * Satin black powdercoat finish
Not Yet Reviewed
$330.00
$297.00
These Belltech drop lower ball joints replace the stock lower ball joint and relocates the upper ball joint position. The design allows the vehicle to retain the use of stock wheels without any clearance issues. Lower your truck while maintaining your factory ride comfort, what else could you ask for?
( 2 )
$355.50
On Sale
Flowmaster 50 series Big Block mufflers have proven to not only significantly improve acceleration and towing power, but to simultaneously increase fuel economy as well. Because of their efficiency, underhood temperatures on trucks and motor homes can be reduced as much as 200 degrees F--helping to lengthen the service life of other engine components. These mufflers are designed and sized for larger gas and diesel engines typically used in towing vehicles and RVs. So, for more comfortable cruising, Flowmaster tuned them for reduced exterior exhaust sound and lower levels of interior resonance.
( 34 )
$283.95
—
$299.95
$255.55
—
$269.95
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 357 )
$383.00
—
$464.15
$344.70
—
$417.74
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
