Availability
Showing In Stock Items. Show All 19 Items.
On Sale
The partner package for the 8-point roll bar main hoop kits, these Competition Engineering 8-point roll bar strut kits provide the support pieces to complete your safety cage. They include: two rear struts, two front door bars, main hoop cross brace, two diagonal hoop supports, six weld joint gussets, and eight 6.000 in. square x 0.134 in. (10 gauge) thick floor plates. Combining these parts with a main hoop kit gives you an 8-point roll cage—a modification required in most racing circuits for providing increased cabin safety and side impact protection. Both the main hoop and the strut kit are available in your choice of mild steel or chromoly. Complete your design of a secure cockpit with a Competition Engineering 8-point roll bar strut kit.
( 5 )
$311.99
$280.79
On Sale
Competition Engineering funny car cage kits are crafted from aircraft-quality chromoly tubing. They're designed to upgrade your 10-point roll cage kit to have funny car cage protection. They are left long and un-notched so that they can be custom-fitted to your application and meet NHRA and IHRA requirements. If you need a kit to upgrade your kit from a 10-point or more roll cage to a funny car cage, Competition Engineering has you covered.
( 16 )
$557.99
$502.19
On Sale
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$339.99
—
$343.99
$305.99
—
$309.59
On Sale
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$407.98
—
$454.99
$367.18
—
$409.49
On Sale
Competition Engineering 10-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 10-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 10-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two diagonal hoop supports, and two front downstruts * 10-Point Roll Bar Strut Kit, which includes two rear struts, two door bars, weld joint gussets, and steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 21 )
$524.98
—
$528.98
$472.48
—
$476.08
On Sale
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$294.99
$265.49
On Sale
There is nothing more valuable in your Suzuki Samurai vehicle than its occupants. Low Range Off-Road's Sport cage kits were designed with your own families' safety in mind. Low Range Off-Road manufactures their Sport cages in-house, from .120 in. wall DOM steel tubing, and when properly welded, the cage is very difficult to crush and will serve most off-roader's needs. The rear cage bolts into the floor of the tub, thereby utilizing a large floor plate it spreads the load across a large area, forming a strong attachment point. Cages are shipped in prebent and coped tube segments, ready to be welded together. Installing a tube cage usually precludes the use of Samurai doors, Low Range Off-Road resolved this issue by using laser-cut steel plates on the front lower portion of our cage. With their unique design elements, the front doors shut correctly and do not ruin your nice paint job or your door panels. This also makes it easier to run your door straps. In addition, integrated into the design is a speaker grille that can be removed for speaker installation—and is also made from the same 3/16 in. thick steel as the mounting brackets, therefore, it helps protect speakers from damage. Hopefully you never need it, but if you do end up on your lid, be assured that you'll more than likely come away with only minor scratches to the cage paint. Choose the Sport cage kit that is better suited to your specific application needs—or order both front and rear for a complete cage kit. Available Options: * Front Samurai Sport Cage kit: Part No. SRC-SCF * Rear Samurai Sport Cage kit: Part No. SRC-SCR * Complete front and rear set: Part No. SRC-SC—both front and rear halves of the Low Range Off-Road Sport cage tie into the factory soft top roll bar * Installation on a factory tin top is possible, but requires the addition of a soft top roll bar (sold separately) Note: Some minor grinding and trimming may be required.
Not Yet Reviewed
$520.19
—
$578.15
$442.16
—
$491.43
On Sale
Drag racers want their cars to be as safe as possible, and Competition Engineering 12-point roll bar main hoop kits offer superior strength and chassis rigidity for 360 degree driver protection. This design links the cage to the front frame, essentially making it one solid unit--you'll notice better control and vehicle reaction time. These packages furnish you with the main hoop, one top hoop, two front downstruts, one main hoop crossbrace, and two forward struts. This type of modification is required on most racing circuits for increased cabin safety and side impact security. The units require only minor modifications and welding for solid installation; they're tailored for specific types of cars, so check the applications for matching specs. Competition Engineering 12-pt roll bar main hoop kits require also ordering the appropriate strut kit if you desire a complete roll cage install. Both kits are available in mild steel and chromoly.
Not Yet Reviewed
$384.99
—
$391.99
$346.49
—
$352.79
On Sale
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$437.99
$394.19
On Sale
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 38 )
$279.99
—
$288.99
$251.99
—
$260.09
On Sale
Trail-Gear Rock Defense roll cages will upgrade your Jeep by adding superior performance, safety, and durability. These components are made of heavy-duty mild steel that's designed to offer more protection in the event of a roll during your off-road or even on-road adventures. Trail-Gear Rock Defense roll cages are an excellent addition to any off-road enthusiast. Order the kit recommended for fitment on your vehicle.
( 5 )
$499.99
$424.99
On Sale
RaceQuip PRO20s are Snell SA2020-rated, full-face auto racing helmets that incorporate contemporary styling with modern production techniques. The shell utilizes pressurized steel molds to achieve the best combination of strength and lighter weight. The SA rating means that the interior, paint, and Kevlar® chin strap are fire retardant, so PRO20 helmets are suitable for all motorsports. If you need or prefer a full-face helmet, this is the model for you. Please verify the size when ordering. Additional features of RaceQuip PRO20 full-face helmets include: * Exceeds Snell SA2020 rating * Lightweight pre-preg composite shell * Expanded polystyrene (EPS) liner mated to shell * Distortion-free 3mm polycarbonate face shield with red anodized aluminum pivot kit * Hand-ratcheting tear-off posts * Silicone eyeport gasket seals out dust and dirt * Wide eyeport provides excellent peripheral vision and allows for the use of personal eyewear * Reinforced M6 threaded HANS/HNR inserts for easy HANS or other head-and-neck-restraint device anchor posts (not included) * Comfort-fit blended Nomex interior with top and back exhaust vents help keep your scalp cool * Slick aero-design with medium-sized chin spoiler * Available in a variety of colors and sizes
( 87 )
$329.95
—
$649.95
$296.95
—
$422.95
On Sale
RaceQuip's VESTA20 Snell SA2020-rated, full-face auto racing helmets are a bold departure from tradition. They use contemporary styling with modern production techniques, including a shell formed with pressurized steel molds to achieve the best combination of strength and lighter weight. These innovative models feature FRP composite shell construction and uniquely-shaped chin bar to support a scalloped face shield design. The SA rating means that the interior, paint, and Kevlar® chin strap are fire retardant, so these helmets are suitable for all motorsports. If you prefer a bold, full-face helmet, this is the model for you. Please verify the size when ordering. Additional features of RaceQuip VESTA20 helmets include: * Hand-laid, fiber-reinforced polymer (FRP) shell * Expanded polystyrene (EPS) liner mated to shell * Reinforced M6 threaded HANS/HNR inserts also mated to shell for easy HANS or other head-and-neck-restraint device anchor posts (not included) * Distortion-free, 3mm polycarbonate low-fog face shield with a molded thumb catch * Red anodized aluminum pivot kit with adjustable friction lock * Hand-ratcheting tear-off posts (8 positions) * Silicone eyeport gasket seals out dust and dirt * Wide eyeport provides excellent peripheral vision and allows for the use of personal eyewear * Extra set of thicker cheek pads for a customized fit * Comfort-fit blended Nomex interior with back and top exhaust vents for keeping your scalp cool * Bold, edgy styling with a goggle-type shield * Available in different colors, finishes, and sizes
( 5 )
$449.95
$403.95
On Sale
RaceQuip PRO20 Top Airs are Snell SA2020-rated, full-face auto racing helmets that incorporate contemporary styling with modern production techniques. These helmets are referred to as forced-air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The unique manifold design gives this helmet a super-low profile that will fit any car utilizing a standard 1.250 in. barbed fitting, so air flows down the face shield for cooling and anti-fogging. The shell uses pressurized steel molds to achieve the best combination of strength and lighter weight. The SA rating means that the interior, paint, and Kevlar® chin strap are fire retardant, so these helmets are suitable for all motorsports. If you need or prefer a full-face helmet with down-flow air, this is the model for you. Please verify the size when ordering. Additional features of RaceQuip PRO20 Top Air helmets include: * Lightweight pre-preg composite shell * Expanded polystyrene (EPS) liner mated to shell * Reinforced M6 threaded HANS/HNR inserts also mated to shell for easy HANS or other head-and-neck-restraint device anchor posts (not included) * Distortion-free 3mm polycarbonate face shield with red anodized aluminum pivot kit * Hand-ratcheting tear-off posts * Silicone eyeport gasket seals out dust and dirt * Wide eyeport provides excellent peripheral vision and allows for the use of personal eyewear * Comfort-fit blended Nomex interior helps keep your scalp cool * Aero-design with medium-sized chin spoiler * Available in different colors and sizes
( 1 )
$429.95
—
$699.95
$384.95
—
$454.95
On Sale
Simpson Devil Ray 3.0 composite helmets feature a new, updated design, improving on the Devil Ray lineage. SA2020 rated, the helmets include a variety of perks to ensure comfort and racing performance. They're available in a variety of shells, sizes, colors, and finishes. Additional details: * Removable EPS cheek pads to allow for a custom fit * Excellent ventilation around the top of the head to assist with driver cooling * Compatible with all Simpson communication kits and gel ear cups
( 1 )
$412.95
$370.95
On Sale
Brothers Trucks offers replacement seat belts for a variety of applications, including many Chevy and GMC models from the 1940s through the 1980s. They're available in standard 2-point non-retractable (or deluxe retractable) lap style belts; or 3-point retractable lap and shoulder belts. Most kits use original mounting holes and hardware, positioning the belts easily within reach. Order the style and color you prefer.
Not Yet Reviewed
$416.95
$374.95
On Sale
The RaceQuip PRO20 Carbon side air helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with advanced composite production techniques. The shell is built using pre-preg carbon fiber and kevlar materials placed into pressurized steel molds to achieve the best combination of light weight and strength. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The left side manifold design utilizes an inlet barb that works with standard 1.250 in. round hose. The forced air is channeled from the manifold across the faceshield from left to right.The forced air cools your face and airways and also keeps the faceshield fog free. Reinforced M6 threaded HANS/HNR inserts are mated to the Carbon Fiber shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The fire retardant clear coat produces a deep gloss finish to highlight the tight weave of the Carbon Fiber.The Snell SA rating means that the interior, clear coat, and kevlar chin strap are all fire retardant, so the RaceQuip PRO20 Carbon side air helmet is suitable for use in all forms of motorsports. The rear exhaust vents and comfort fit blended Nomex® interior help to keep your scalp cool. All these features are wrapped in a stylish aero design lightweight carbon composite shell with a medium sized chin spoiler. The result is the outstanding value delivered by the RaceQuip PRO20 Carbon side air helmet. Features include: * Exceeds Snell SA-2020 rating * Lightweight composite shell * Expanded polystyrene (EPS) liner * Comfort-fit blended Nomex interior * Distortion-free 3mm polycarbonate low-fog shield * Aluminum pivot kit with adjustable friction lock * Tear-off posts, hand-ratcheting to eight positions * Silicone eyeport gasket to seal out dirt * KEVLAR® chin strap * Great peripheral vision * Fire-retardant paint and interior * Utilizes a standard 1.250 in. round barb fitting * Forced-air is routed left to right
Not Yet Reviewed
$699.95
$384.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
