Availability
Showing In Stock Items. Show All 40 Items.
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 51 )
$482.95
—
$699.95
$384.95
—
$471.95
On Sale
MSD Ultimate HEI kits have everything you need to turn your early model GM HEI distributor into a great performance distributor. The MSD HEI modules feature special circuitry to produce 50 percent higher coil drive currents than stock modules, resulting in higher spark energy at racing rpm. By matching the coil specifications with the modules, MSD delivers more accurate timing and dwell control. The kits also include a high-quality rotor, a durable cap with brass terminals, and even a new dust cover.
( 19 )
$399.95
$359.95
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$305.87
—
$550.88
$254.87
—
$518.28
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$299.95
$269.95
On Sale
A cam sync signal is required to run sequential fuel injection, and Holley camshaft sync kits are ready to set the firing order for top performance. Available in a choice of kits for standard cam height small block and big block Chevys, as well as raised cam height big blocks, these Holley kits fit Jesel and other external, dry timing belt cam drive systems. They provide a plug-and-play cam position signal to Holley EFI systems, but are also compatible with any EFI system which can read a digital, square-wave cam input signal. All of the kits feature unique T-nut and bracket designs that allow for complete sensor adjustment from the outside of the bracket with a single jam nut. Let your ECU know which cylinder is number one in the firing order with a signal from Holley Chevy camshaft sync kits. Holley kits include: * 3-wire H all-effect sensor (8 to 20 V) * Anodized billet aluminum bracket * Mounting hardware * Mating connector * Stainless steel 1/4 in.-20 "flying magnet" screw with a high-temperature, rare-earth magnet
Not Yet Reviewed
$359.95
$323.95
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$482.95
$433.95
On Sale
MSD Super HEI kits solve the common problem of power loss and a lack of response above 4,500 rpm. Different kits are available with all of them allowing you to remove or bypass the low-powered HEI module and coil and replace them with an MSD 6A or 6AL ignition control and Blaster 2 high output coil. The results are more power, an increased rpm range, easier starting, and better mileage and performance. The Super HEI conversion fits all GM V8 engines with the GM HEI internal coil distributor. The complete Super HEI kits include an MSD 6A ignition, Blaster 2 coil, coil wire, HEI dust cover, and coil bracket. The HEI II kits are identical to the standard kits, except that they come with a 6AL ignition. The 6AL has Soft Touch Rev Control to protect your engine from overrevving.
( 24 )
$549.95
$493.95
On Sale
Edge EAS Street Diesel kits give users the ability to monitor EGTs, boost pressure and fuel pressure—exactly what most diesel owners want to see. These kits are designed for those truck owners who have upgraded their rigs with larger turbos, performance lift pumps, and maybe even injectors, where the stock sensors just aren't enough anymore. The kits are ideal for hot street trucks, daily drivers, and towing applications. The EGT probe can easily be installed in the exhaust manifold for the most accurate cylinder temps. The EAS 0-100 psi sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. The second 0-100 psi sensor can be easily installed on an aftermarket lift pump or anywhere in the low-pressure fuel side to monitor lift pump pressure, ensuring your injection system is getting all the fuel it needs. All-new Street Diesel kits save money over buying the three sensors separately and offer another great solution for those with aftermarket performance accessories on their diesel. Product details: * 1 EAS Starter Kit * 1 EAS EGT Probe * 2 EAS 0-100psi Pressure Sensors * 1 EAS Universal 5 V Harness Kit (accepts two pressure sensor kits)
Not Yet Reviewed
$399.95
$359.95
On Sale
aFe Control suspension logic ESD kits contain simple plug-and-play modules that eliminate the suspension control check engine light. This allows installation of aftermarket shocks or coilovers on vehicles previously equipped with electronic shock absorbers. ESD (electronic shock delete) kits are sold in sets of four, one for each shock, and feature anodized extruded aluminum heat sinks, abrasion-resistant braided wiring shields, and GM-style Metri-Pack connectors.
( 1 )
$372.00
—
$433.00
$334.80
—
$389.70
On Sale
Holley EFI Digital Dash I/O adapter with wiring harness kits offer more performance from your digital dash. Available terminated or unterminated, these vehicle harnesses provide 10 additional inputs/outputs to your 7 in. unit. They can be configured for gauges or switches and data-logged locally through your digital dash. The adapters bring out connections to a waterproof 26-pin connector, similar to ones used on EFI units, and the kits include a USB memory stick to update digital dash firmware that supports the adapter.
( 3 )
$349.95
—
$399.95
$314.95
—
$359.95
On Sale
AEM exhaust backpressure install kits are specifically designed to give accurate backpressure readings, without sacrificing sensor longevity due to extreme operating conditions. Designed for use with their 4-channel wideband UEGO controller, you get precision readings for ultimate performance using AEM exhaust backpressure install kits. Kits include: * Stainless steel 100 psig pressure sensor * Stainless steel standoff tube with fittings * Stainless steel braided hose * Weld-on/threaded bung.
( 1 )
$368.95
$332.05
On Sale
Whether you're looking for something that's safe for nitrous use or adjustable start retard, the FiTech Advanced CDI ignition box is perfect and comes with a high-energy coil to maximize your engine's potential. As part of FiTech's Go-Spark Series, this ignition box and coil combo offers utility for both the street and strip—with an adjustable spark energy output (275mJ for the street, 585mJ for the strip), customizable rev limiters, precise timing control, and an informative LED display for live rpm or battery voltage. The high-energy coil enhances CDI performance. Go-Spark Advanced CDI features: * Adjustable spark energy output: 275mJ for the street or 585mJ for the strip * Rev limiter settings for Burnout, Launch, and Max Engine Over-Rev Protection * Adjustable Start Retard for quick, easy cranking to ease the load on your starter * Single Nitrous/Step Retard input for safe Nitrous Oxide System use * Digitally controlled for precise timing controlled * LED shows live rpm or battery voltage, with buttons for adjustments * Coil produces up to 50,000 Volts * Coil can mount almost anywhere * Better reliability and performance
Not Yet Reviewed
$445.99
$379.09
On Sale
Range Technology DFM modules are designed for late model GM refresh trucks and SUV's. This innovative device is the first in the market to provide a solution for disabling the dynamic fuel management system in these vehicles. By installing the DFM Module, users can effectively override the vehicle's built-in cylinder management system, allowing the engine to run on all cylinders, all the time! This leads to a better driving experience, and better long term engine reliability. This device is a true dual threat eliminating the most frustrating features your brand new truck or SUV's came equipped with, DFM and engine auto start/stop. By simply plugging this device on to your ECM, both systems will remain inactive at all times, leaving you with the peace of mind your engine will run more consistently without issues or interruption. Just hop in and drive without the worry of cylinders cutting off leaving you powerless or the engine shutting off at every stop sign, creating a hesitation on take-off or killing power to your in-cabin luxuries like A/C and rear entertainment systems. Features: * Disables dynamic fuel management (DFM) and engine auto start/stop systems * Smart inline technology integrates seamlessly with the ECM * Allows a true 'return to stock' status when removed with no trace for worry free dealer services * All-time V8 mode means better power on demand, a more consistent driving experience, reduced engine and valvetrain wear, and improved long term engine reliability * Enjoy that V8 rumble and avoid unpleasant exhaust notes and drone from running in cylinder deactivation mode * Plug-and-play installation can be completed in minutes * Some applications may still encounter 0-Cylinder Mode while coasting when 0% throttle input is detected at the ECM * 49-State Emissions Compliant * Made in USA
( 15 )
$499.95
$448.95
On Sale
If your Coyote-powered Ford was built after February 23, 2016, and you need a 2-Step rev-limiter for consistent burnouts or launches, MSD part number 87311 has you covered. When activated, the 2-Step will hold your engine at a constant RPM. This can be achieved by way of a clutch switch or push button. As soon as your activation switch or button is released, full ignition is restored and you're off to the races. The RPM is adjusted with two built-in rotary dials ranging from 1,800-9,900 rpm in 100 rpm increments. A handy LED shows when the launch rev limit is active.
Not Yet Reviewed
$376.95
$339.25
On Sale
Holley ignition coil driver modules are used to drive ignition coil packs. They feature a potted design that allows installation inside the engine compartment. These universal modules include the wiring harnesses and mating pigtails for installation, and are available in 4- and 8-channel quantity options.
( 2 )
$312.95
$281.65
On Sale
You have an alternative choice for flex fuel sensors--AEM Electronics ethanol content sensors. While most gas stations label their flex fuel as E85 (85 percent ethanol/15 percent gasoline), the actual content could be quite different. AEM sensors deliver the ability to determine the composition of the fuel blend pumped into your vehicle at any given time. They measure content percentage and fuel temperature allowing users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize their engine's tuning calibration for fuel ethanol content. These kits include plug and pins for electrical connections, as well as either -6AN or hose barb fittings (depending on kit chosen) for integration into the fuel system.
( 4 )
$328.95
$296.05
On Sale
Holley drive-by-wire throttle body wiring harnesses are designed for use with the Holley Dominator ECU, as well as the factory drive-by-wire throttle body. These harnesses feature pre-terminated connections, ensuring true plug-n-play installation.
Not Yet Reviewed
$474.95
$426.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 622 )
$449.95
$403.95
On Sale
K&N throttle control modules are designed to improve throttle response and acceleration, as well as pedal sensitivity without modifying factory ECU settings. These modules process input data from the gas pedal and bypasses the factory signal to your vehicle's ECU, sending a modified signal directly to the throttle body. This creates an increase in throttle responsiveness that will make your car feel like a whole new machine. Features and benefits: * Easy plug-and-play installation * No software required and can be tuned on the go * Sends a modified signal directly to the throttle body * Includes the module, wiring harness, adjustable dial, hardware, and instructions
Not Yet Reviewed
$314.99
$264.99
On Sale
Get that stout performance you've always craved out of your automatic transmission with the installation of a B&M remote throttle position sensor! Designed for use with carbureted engines, B&M throttle position sensors are for use with B&M's automatic transmission controllers (sold separately). B&M throttle position sensors feature a simple three-wire design, making it easier to install. The adjustable cable allows for various mounting locations on your engine, and the supplied bracket provides a place to mount the throttle cable, as well as providing a more professional looking appearance.
( 2 )
$326.95
$294.25
On Sale
aFe Scorcher HD modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin, on-the-fly power adjustments. The four power settings are adjustable with one button and the LED light represent the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher HD modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure to improve vehicle efficiency, power, and throttle response. They use a high-quality aluminum extrusion black powdercoated enclosure casing and factory-style connectors which requires no modification to your factory harness. These factory-style connectors plug directly into the stock wiring harness connectors and sensors.
( 2 )
$282.00
—
$461.00
$253.80
—
$414.90
On Sale
Take your throttle sensitivity adjustment wireless! Superchips Amp'd 2.0 throttle booster with Bluetooth removes throttle response delays, instantly putting you in total control of your vehicle's throttle response. The wireless Bluetooth switch is an industry-exclusive feature, and the Amp'd 2.0 app provides unparalleled control over your throttle experience. The throttle boosters are pre-loaded with five preset throttle curves and thousands of custom curve possibilities. You paid for a powerful vehicle, and you should have full control over how it drives. Take control with Amp'd 2.0! Features: * Includes mobile app for Android/IOS. * Includes coverage on late-model gas and diesel equipped vehicles * GM/Ford/Dodge/Ram/Toyota/Jeep coverage and more * Increases accelerator pedal response over stock * Reduces dead pedal feeling (acceleration lag) * Works with stock or modified vehicles * Build turbo boost quicker on turbocharged vehicles * Five preset throttle curves * Three customizable throttle slots * Easy installation
( 2 )
$279.95
$251.95
On Sale
Scott Drake underdash wiring harnesses feature all brand new parts with no care needed, including the fuse block, clips, lamp sockets, and all molded plugs. They're made of superior-quality materials to give you the long-lasting durability and performance you expect, and are made to exact specifications to ensure a perfect fit and finish. Order the harness designed for your classic 1960s muscle car.
( 5 )
$849.95
$467.95
On Sale
SCT Livewire TS performance programmer and monitors let you tap your ride's hidden performance and excitement! SCT Livewire plus touch screens are easy to set-up, use, and navigate to quickly upgrade your boring factory-calibrated vehicle computer for a high performance driving experience. These tuner kits are available for both gas and diesel vehicles plus they include a windshield mount to keep your data at eye level. You're not like everyone else and your driving experience doesn't need to be mediocre! Power tune with SCT Livewire TS Plus performance programmer and monitors. SCT Livewire TS Plus features: * Color 4 in. touch screen display * Rear view camera input * Automatic on/off/sleep mode * Holds up to 10 custom tunes * Reads and clears DTC codes * Built-in performance calculator * High-speed data logging and monitoring * User adjustable tune options * User selectable graphics and gauge layouts * User adjustable warnings/alerts * Adjust for different size fuel injectors * Disable CMCV to prevent CEL * Remove, increase, or decrease vehicle's speed limiter * Increase or decrease idle speed * Disable traction control * Add or remove timing by rpm range * Add or remove fuel at wide open throttle * Change transmission shift pressure - automatic transmissions only * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Stores vehicle's stock file before programming * Supports and holds custom tunes * Adjust electric fan engagement temperature Custom Tune File Adjustable Options: * Increase or decrease idle speed * Remove, increase, or decrease vehicle's rpm limiter in Drive * Remove, increase, or decrease vehicle's rpm limiter in Neutral * Remove, increase, or decrease vehicle's speed limiter * Adjust electric fan engagement temperature * Add or remove fuel at wide open throttle * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Increase or decrease the wide open throttle shift points of each gear individually * Change transmission shift pressure - automatic transmissions only
( 53 )
$599.00
$539.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
