Availability
Showing In Stock Items. Show All 319 Items.
Haltech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$375.00
MSD Power Grid wide band oxygen sensor modules provide valuable air/fuel ratio data to your MSD Power Grid, data logger, or air/fuel ratio gauge. These modules feature: * Plug-and-play with MSD Power Grid * Easy set-up; no free-air calibration required * Completely sealed unit for durability in race environments * Bosch 4.9 oxygen sensor * 0 to 5 V output to run an air/fuel gauge or data logger * Dual-color LED provides on board diagnostics * Multiple modules can be used on a single Power Grid * Data logs air/fuel ratio and heater voltage * Fuel calibration options for gasoline, methanol, ethanol, E85, propane, and diesel * Custom fuel calibration option can be programmed by user
( 2 )
$342.95
Upgrade your ignition to the power and performance of a Summit Racing™ system. Our ignition system combos for Chevy V8 feature a Summit Racing™ multi-spark digital capacitive discharge ignition box (with or without rev limiter), a Summit Racing™ billet distributor or blueprinted HEI distributor, and our 51,000 V, 260 milliamp ignition coil (the HEI kit does not include the external coil). The epoxy coil has E-core windings, stud terminals, and an extruded aluminum mount. It measures 3.228 in. tall x 4.553 in. long x 4.519 in. wide.
( 38 )
$331.98
—
$451.97
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 52 )
$499.95
Aeromotive Premium HD 60-amp fuel pump wiring kits are recommended for all brushless spur gear pumps 5.0 and higher. These wiring harnesses are 60-amp capable, fully loomed, and professionally terminated for peace of mind and easy installation. They feature an overall length of 20 ft. for full-size vehicles, plus 6-gauge main power and 16-gauge ground wires. More product features, items, and specifications include: * Automotive relay - 75 amp/12 V DC * Circuit breaker - 60 amp/12 V DC * Trigger wire (red) - 10 ft. of 16-gauge * Fuel pump power/ground wire – 18 ft. of 6-gauge * Battery positive (red) wire – 2 ft. of 10-gauge * Relay ground (black) wire – 2 ft. of 16-gauge * Self-tapping mounting screws (4) * Twelve Cable ties (6 in.), blue insulated butt connectors (2), ring connectors (2) for No.10 stud, and ring connector for 3/8 in. stud * Recommended tools for installation - electrical terminal crimping tool, 5/16 in. nut driver, and electric drill
( 2 )
$346.40
No matter whether you have to move your battery for drag racing, off-road, Circle Track action, or a street rod application, Taylor has it covered, with relocation kits for both single and dual-battery setups. These coated-steel battery trays mount directly to the chassis, and all kits come complete with hold-downs, J-bolts, cable clamps, and appropriate lengths of heavy-gauge red and black cable with factory crimped terminals. Dual-battery kits permit spaced-apart mounting for odd installations or better weight distribution.
( 48 )
$257.25
—
$402.60
Keep your battery safe and secure with one of these Taylor 200 Series aluminum battery box kits. They feature a 3-piece design that allows access without removing the battery from the box. Constructed of .040 in. aluminum, the battery boxes comply with NHRA rule 8:1 and fit most Odyssey PC1500 series, Optima RedTop and YellowTop, and most group 34/78 and 75/25 batteries. The Taylor 200 Series aluminum battery box kits feature the Taylor logo embossed on the lid and include chrome acorn nuts for attaching the lid. Heavy-duty, one-piece welded battery tray hold-downs and spacers are included to accommodate different width batteries. The battery box kits include 16 ft. of positive battery cable and 20 in. of negative battery cable. You can choose between 2-gauge, 1-gauge, or heavy-duty 1-gauge welding cable to make one of these Taylor 200 Series aluminum battery box kits the perfect fit for your application.
( 18 )
$345.85
—
$379.80
Digi-Tails LED taillight conversion panels are much more visible than your standard taillights. These light panels contain high-intensity, wide-angled LEDs that are strategically positioned to maximize light output and fully optimize your lenses. Each light panel is custom engineered to fit the vehicle's housing precisely. Features and details include: * Fully sequential LEDs light up in a fluid, sweeping pattern * Allows switching between standard light and fully sequential * Includes LED boards and wiring * Includes components for both left and right sides on vehicle * Use of LED flasher recommended (sold separately)
( 64 )
$268.00
—
$309.00
MSD Ultimate HEI kits have everything you need to turn your early model GM HEI distributor into a great performance distributor. The MSD HEI modules feature special circuitry to produce 50 percent higher coil drive currents than stock modules, resulting in higher spark energy at racing rpm. By matching the coil specifications with the modules, MSD delivers more accurate timing and dwell control. The kits also include a high-quality rotor, a durable cap with brass terminals, and even a new dust cover.
( 19 )
$409.95
Timing is everything. Holley EFI cam sync sensor kits provide the components to set your engine's power curve for optimum performance. The complete kits include a sensor, stainless steel flying magnet target with high-temperature rare earth magnet, connector, pins, seal, and washers. The kits are also available without the flying magnet target and washer; plus, the components are also available individually. Eliminate ignition timing variations and mis-adjustments with Holley cam sync sensor kits. Features include: * 3-wire Hall effect camshaft sensor generates digital square-wave signal * Can work with internal and external cam drive systems (i.e. gear, chain, and belt drive systems with or without timing cover) * Can operate from 8 to 20 V * M12x1 threads for finer gap adjustability; approximately 1.5 in. length
Not Yet Reviewed
$268.95
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$280.95
—
$338.95
You can benefit from a stronger and more consistent trigger signal with Moroso crank trigger Ultra Series kits. These kits use a transducer mounting bracket, which allows for a better timing adjustment range over the others. Their damper register locates the crank trigger wheel to help keep it perfectly aligned and concentric as it rotates. Other product features include built-in strain relief, a double-cavity nylon connector, and powerful rare earth cobalt magnets.
( 4 )
$403.99
Lokar interior battery disconnect lever kits are designed to bolt directly to B&M Pro Bandit, B&M Ratchet, Quarter Pro, Precision Performance Products, TCI Thunder Stick, TCI Outlaw, TCI Lighting, and Hurst Quarter Stick shifters, or they can be mounted to the floor. They include a red anodized billet aluminum power lever for quick recognition. They can work in conjunction with a fire system kill switch, a standard 8 ft. push/pull cable, and the necessary mounting hardware.
( 6 )
$316.95
—
$409.95
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$502.87
$310.87
—
$322.37
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$255.95
—
$306.95
A cam sync signal is required to run sequential fuel injection, and Holley camshaft sync kits are ready to set the firing order for top performance. Available in a choice of kits for standard cam height small block and big block Chevys, as well as raised cam height big blocks, these Holley kits fit Jesel and other external, dry timing belt cam drive systems. They provide a plug-and-play cam position signal to Holley EFI systems, but are also compatible with any EFI system which can read a digital, square-wave cam input signal. All of the kits feature unique T-nut and bracket designs that allow for complete sensor adjustment from the outside of the bracket with a single jam nut. Let your ECU know which cylinder is number one in the firing order with a signal from Holley Chevy camshaft sync kits. Holley kits include: * 3-wire H all-effect sensor (8 to 20 V) * Anodized billet aluminum bracket * Mounting hardware * Mating connector * Stainless steel 1/4 in.-20 "flying magnet" screw with a high-temperature, rare-earth magnet
Not Yet Reviewed
$357.95
—
$377.95
Scott Drake LED sequential taillight kits give your stock lenses and housings modern signaling. With patented "Smart-Signal" technology and an exclusive "Batwing" design, Scott Drake sequential taillights offer a hassle-free installation--no splicing is required. The LEDs are up to five times brighter than your stock bulbs and they run cooler and use less energy. And, you don't need not buy anything extra, because they work with your factory pieces! Get sequential lighting for your classic Mustang with LED taillight kits from Scott Drake.
( 16 )
$267.95
—
$409.95
Sierra Marine Delco EST conversion kits upgrade GM engines with conventional ignition systems to electronic. They are offered for 4-, 6-, and 8-cylinder engines. Sierra Marine Delco EST kits include: * Delco EST (Electronic Spark Timing) distributor * Coil * Ignition wires * Harnesses
( 3 )
$465.99
ACCEL now offers ignition upgrade kits for a wide range of car, truck, and van applications. The new coils provide up to 15 percent more energy over stock coils—and enable you to transfer more of that energy through the spark plug because of ACCEL's HP Copper Core Plugs (included in the kit). These spark plugs are better at delivering energy than platinum or iridium plugs; and with their C-cut design, they'll light your air/fuel mixture faster. Upgrade kit features: * HP Copper Core Plugs * C-cut ground electrodes * Up to 15 percent more spark energy for increased efficiency * High-temp epoxy potting lessons shock and vibration * Direct OE replacement; usually installs in less than an hour * OBD II compatible; will not trip codes
( 2 )
$377.95
Recently, engineers at FAST turned to the OEMs to see what they trust in the way of rpm-measuring crank triggers for their 400 and 500 horsepower daily drivers. Until now, flying magnetic trigger wheels with bulky inductive pickups have been used with the risk of broken magnets or losing magnets at high engine rpm. Now there is a better answer--FAST magnet-free crank trigger kits. A magnet-free device, these kits from FAST include a wheel constructed from ASTM A36 grade steel that is so strong that it only needs to be .125 in. thick and is virtually indestructible. With the wheel being this thin, it not only weighs less but requires less space than competitors' aluminum versions. And the FAST inductive sensor is also much smaller than others on the market and is hermetically sealed with the connector molded into the body. The key to the crank trigger's dependability and accuracy lies in the trigger wheel design. Rather than having added magnets, the wheel has tabs on the outer rim. These tabs are measured by the inductive sensor as the wheel revolves, which then provides data to the fuel injection and ignition systems for accurate rpm measurement. And because the tabs are a part of the single wheel unit, there is no possibility of loss or fragmentation as with the magnetic style trigger wheels. This sensor is used by OEMs both on and inside the engine and provides long-lasting, accurate timing. Installation is straight forward, and everything required is included. For those already using the FAST XFI system, it's a plug and play unit. In addition, it's compatible with many other EFI systems on the market.
( 2 )
$303.95
Daytona Twin Tec Model 1006 and 1007 external ignition kits are external plug-in ignition modules for 1990 and later Harley-Davidson® Evolution Big-Twin and 1990-1993 Sportster models. They offer a wide timing advance adjustment range that accommodates stock to highly-modified engines. Features include: * Digitally set rpm limit in 100 rpm steps * Selectable single or dual-fire modes * Selectable multi-spark mode for quick starting and smooth cruising * Coil outputs protected against short circuits * Available USB interface and software for programming custom advance curves (sold separately) * Billet aluminum housing with black anodized finish * Easy plug-in installation
Not Yet Reviewed
$476.95
Add some style to your ride with Drake's LED sequential taillight kits. Designed to add some flare to your taillights, these LED sequential taillight kits are easy to install and are available as standard sequential, chasing, or programmable, depending on the application. If you are ready to stand out from the crowd, Drake makes a LED sequential taillight kit that will do the job.
Not Yet Reviewed
$409.95
Simplify your ignition, toss your points, and put one of these Dynatek Dyna S ignition and coil kits in your Harley®. Accurate timing and ease of maintenance make these kits a favorite of record-setting top road and drag racers. Replace your points and condensers with these high performance ignition kits. The DYNA S kits are completely contained ignition systems, are housed behind your ignition cover, and use a magnetic rotor with the original spark advancer, so that the factory advance curve is maintained. These are complete kits, with nothing more to purchase, and they come with complete and comprehensive instructions. Get rid of your point setup and join the Dynatek team.
( 1 )
$327.99
Granatelli Motor Sports ignition system combo kits feature Granatelli's patented 0 ohm wires with extremely low resistance that maintain very high noise suppression. They transmit the full electrical energy of the ignition source to the spark plugs. The end result is increased horsepower, torque, and fuel economy. Order the kit recommended for your vehicle and engine application. Product details: * Direct replacements exceed OEM specifications; OBD-II computer safe * Increase power to the spark plugs up to 400 percent over stock * 0 ohm resistance, no RFI/EMI interference thanks to patented protector ring * Works with all street and race fuel injection systems * Solid stainless steel connector cables and snap-lock spark plug connectors * High-temperature silicone boots; 8mm jackets with fiberglass-reinforced braid resist temperatures up to 500 degrees F * Ideal for use with aftermarket headers or turbocharger systems * Includes all necessary hardware
Not Yet Reviewed
$308.98
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
