Availability
Showing In Stock Items. Show All 21 Items.
Dakota Digital offers a wide range of gauge control modules and related accessories, including these replacement VHX control boxes. They're designed for use with analog gauges. The control boxes are made from original materials and specs to ensure proper fit and performance.
Not Yet Reviewed
$389.45
Save time, sensors, and wiring with Classic Instruments' Zeus-Link all -inclusive gauge interface modules. They will read vehicle data from CAN BUS to drive any Classic Instruments gauges accurately. These units are offered in several styles for connection to a GM OBDII port, Holley Sniper ECU and other Holley ECUs, or a Holley Sniper II ECU. Choose the correct module for your application. Additional features of Zeus-Link modules: * System queries vehicle upon installation to determine what list of parameters can be obtained from the vehicle and used as inputs to gauges * Spaces for six standard gauges: speedometer, tachometer, fuel, oil, volt, temperature, and two auxiliary gauges of the customer's choosing * All instruments can be driven traditionally through proper senders if vehicle ECU does not support an output the driver wants to monitor * Set up and managed all through an app available on the App Store or Google Play * The app is used to configure by choosing which gauges a customer has in the dash and how each gauge gets its signal * The app has a virtual gauge screen, aligning with the dash instruments * The app has easy diagnostics, displays values being received by Zeus-Link and will allow user to cycle gauges to predetermined positions, to verify and correct outputs and wiring * Warning and check engine light outputs on the Zeus-Link and external contacts to light a dash light * Dash light connection * All gauge connections to Zeus-Link (power, ground, signal, dash lights) * Additional resistor dongle available if needed to use multiple Holley CAN devices on the same harness * Harness plugs direct into Zeus-Link and then to Holley ECU or OBD * Holley harness has additional Holley ECU connector for other devices * On-board diagnostic lights give status of power, BLE, and data on the circuit board for Zeus-Link * Pass-through CAN port connection for other CAN devices * Compatible with all Classic Instruments sending units and gauges
( 1 )
$399.95
Lingenfelter Performance Engineering GMLAN CAN-to-analog gauge and relay output modules can be used to display almost any data on the vehicle data network, works on most newer GM vehicles and crate engines, simplifies wiring, and allows newer engines to be installed in older vehicles and retain the factory original gauges. The modules also work with aftermarket gauges. The CAN2-002 modules convert vehicle CAN data, including GMLAN and J1939 data, to analog outputs. They are capable of providing up to four outputs per module and multiple modules can be used on the same vehicle. You can control gauges and other devices without having to duplicate sensors already installed on your vehicle. Features: * Can control most analog OEM and aftermarket electronic gauges including temperature, pressure, tachometer, and speedometer * Provides programmable relay activation output * Relay outputs can control a low oil pressure warning light, fan, or other device based on a combination of multiple engine/vehicle parameters. One example is you could turn fans on when coolant temperature is above 190 degrees and speed is below 50 mph. * Send most ECM sensor data to your engine dynamometer data acquisition system * Software includes a database of common GMLAN and J1939 messages * Software also allows users with knowledge of CAN information to configure almost any CAN message as an output
Not Yet Reviewed
$358.10
AutoMeter DashControl OBDII gauge controllers are, to date, the most advanced way of displaying vehicle data. There's nothing to install, no programing, no changes to your vehicle in any way. Simply plug the unit into your vehicle's OBD-II port—and it turns your factory dashboard display into a fully customizable gauge canvas. See all of the data your vehicle has to offer on your driver information center, heads-up display, or radio. You can also set up visual and audible alerts for any condition or vehicle value. DashControl controllers include two auxiliary 0-5 V inputs, so you can add aftermarket sensors for other values you'd like to monitor. Additional features of Auto Meter DashControl OBDII gauge controllers: * Compatible with vehicles equipped with or without HUD (heads-up display) * Control your NPP/Bi-mode exhaust with your cruise control switch * See boost, fuel pressure, knock retard, and much more using your factory displays * 0-60, 1/8th mile, 1/4 mile, 1/2 mile, and one mile elapsed time recorder * Calculate horsepower and torque * Selectable display location * User upgradeable via free downloads * Zero permanent modifications to vehicle; just unplug and resume * 100 percent warranty friendly—completely reversible by simply unplugging the module * Low power sleep mode ensures your battery will not be drained if DashControl is left in the vehicle
( 2 )
$299.99
—
$309.99
AutoMeter GPS speedometer interface modules can turn any electronic speedometer into a GPS speedometer with just the push of a button. They offer plug-and-play functionality with any AutoMeter programmable electronic speedometer and simple on-button, 10-second calibration for nearly every other electronic speedometer on the market. They feature IP67 construction and are fully sealed against water and dust. They include a fully sealed and paintable magnetic micro antenna and a lightning-fast 10 Hz sampling rate.
( 46 )
$258.99
The AEM Electronics 8-Channel K-Type EGT CAN module uses an integrated cold junction sensor to ensure lab-grade temperature readings across all eight channels. It has the ability to read better than one percent full scale, even at the extreme temperature range (-328 to 2,501 degrees F). The module also includes open circuit/fault detection to notify you if a sensor loses its connection or needs to be replaced. This unit will work with non-AEM devices with configurable CAN bus. The module utilizes flexible CAN configuration jumpers, which allow it to be used with just about any third party devices. Features and benefits include: * Includes 8 K-type thermocouple inputs to accept common K-type thermocouple sensors * Uses common miniature thermocouple sockets * Daisy-chain two modules together for up to 16 temp inputs through a single plug * Outputs all channels via configurable CAN bus via one-plug connection * Cold junction compensated for lab-grade accuracy * Temperate resolution 0.18 degrees F * Integrated open circuit/fault detection
Not Yet Reviewed
$486.95
Racepak EFI V-Net Interface module cables are used to convert the serial data stream for an AEM EMS unit into a CAN bus data stream compatible with the RacePak V-Net System. Data from the module is then available for use with the full range of RacePak V-Net devices including on board displays, real time telemetry, and data logging applications.
Not Yet Reviewed
$389.95
Dakota Digital presents the missing link between your cable-driven speedometer and late model electronic transmission! Measuring 5 1/2 in. x 3 1/2 in. x 2 in., these adapters allow a mechanical-cable speedometer to be used in conjunction with a modern drivetrain which provides only an electronic output. The units use PID control of the cable speed to provide quick, smooth operation, as well as prevent overdriving or damage to the speedometer needle. Consider these adapters as the most precise and easiest to use cable-drive units on the market. Additional features of Dakota Digital electronic signal to mechanical cable drive adapters: * 36 in. cable available for GM thread-on, GM clip-on, and Ford clip-on style speedometers (select preferred model) * Powerful motor is quiet enough to mount the module inside the cabin * Waterproof case can also be mounted under the hood, or even inside a fenderwell * Bluetooth-enabled to sync with available mobile app for stone-simple set up * Supplied programming switch and LED readout make setup easy * For OBD-II equipped vehicles; the supplied pigtail will easily plug into the DLC, simplifying the wiring connections
( 16 )
$380.00
Dakota Digital tire pressure monitoring systems will be the finishing touch to your hot rod. These TPMS units are the expansion modules for Dakota Digital HDX instrument systems—and give you real-time pressure readings for all four tires, displayed in your existing message center. The kits include four wireless valve stem sensors that report back to a vehicle-mounted receiver for on-the-fly information. They are easily reprogrammable upon tire rotation or replacement. No more tire kicking! Dakota Digital tire pressure monitoring systems provide the information you need.
Not Yet Reviewed
$489.25
Ready to tune your ride? An NGK air/fuel ratio monitor kit will provide accurate, useable information to make fuel delivery adjustments and improve performance. These compact second-generation units afford you a fast response with superb accuracy within 0.1 AFR—plus an expanded selectable range of 9:1-16:1 (default) or 9:1-20:1, and a selectable analog output. NGK air/fuel ratio monitor kits include: * Module * Wiring harness * Wideband air/fuel ratio sensor * Exhaust boss and plug * Tuning manual
( 8 )
$254.99
These AutoMeter external digital Pro Shift light gauges are ready to go right out of the box; no separate modules or pills are required. These shift light gauges feature super-bright LED bulbs and a digital rpm display. Digital Pro Shift lights are available with a variety of additional features: * Level 1 features a single programmable shift point with digital rpm display. * Level 2 adds five individual shift point settings, including a launch setting, a multicolor adjustable shift light for customization, and progressive shift settings. * Level 3 includes all of the above features and adds a playback function. Playback replays the recorded run on the digital display and outputs it to an AutoMeter tachometer.
Not Yet Reviewed
$282.99
—
$299.99
These AutoMeter external digital Pro Shift light gauges are ready to go right out of the box; no separate modules or pills are required. These shift light gauges feature super-bright LED bulbs and a digital rpm display. Digital Pro Shift lights are available with a variety of additional features: * Level 1 features a single programmable shift point with a digital rpm display. * Level 2 adds five individual shift point settings, including a launch setting, a multicolor adjustable shift light for customization, and progressive shift settings. * Level 3 includes all of the above features and adds a playback function. Playback replays the recorded run on the digital display and outputs it to an AutoMeter tachometer.
( 8 )
$279.99
New Vintage USA Woodward Series Quadzilla analog gauges are original styled instruments, available in NVU's popular 4 3/8 in. mounting hole size with polished stainless steel bezels and domed lenses. They feature a 4-in-1 gauge set design, with easy-to-read menu functions, fully programmable inputs for speedo, tach, and fuel—making them the most versatile stand-alone gauge kit on the market! In addition, their installation is a snap with NVU's exclusive color-coded AMP connector harnesses and easy-to-adjust back clamps. No additional filters, adapters or driver modules, or boxes required--these New Vintage USA Quadzilla instruments run as-is! Woodward Series Quadzilla instruments include: * Speedometer 0 to 140 mph * Tachometer 0 to 8,000 rpm * Oil pressure gauge 0 to 100 psi * Fuel level gauge (programmable inputs) * 1 additional analog input and voltmeter display * Oil pressure sender 1/8 in.-27 thread * Bushing kit with 1/4, 3/8, and 1/2 in. thread * Programming button * Detailed instructions * Bold wrap-around Deco-styled graphics * Real plated inner accent ring to match stainless steel bezel * Available with black gauge face, white graphics, and red pointers, or with beige face, black graphics and red pointers
Not Yet Reviewed
$479.99
Sierra Marine Sahara Series tachometers feature crisp tan dials and fire-orange pointer tips that will give any dash an elegant OEM look. They combine red through-dial and white perimeter lighting for great night readability. Features include: * Tan dial and retainer, black graduations and numerals, black pointer with fire-orange tip * US and metric scales, with ISO symbols, where appropriate * Scratch-resistant curved glass lenses with black matte near-flush bezels * White perimeter and red through-dial lighting
Not Yet Reviewed
$338.99
For those who've installed an RTX instrument panel in their '57 classic, Dakota Digital offers matching RTX Series analog clocks to help finish off your retro dash perfectly! These clocks convey a vintage vibe to complement the throwback gauges. They feature an hour and minute hand with hash marks for each hour; needles are lighted; and LED backlighting is available in a choice of colors to match your RTX cluster.
( 3 )
$256.50
Holley EFI tachometer gauges complement your other instrumentation with precision and style. Designed specifically for use with Holley EFI systems, they also work as standalone units. The dials are available in multiple size options, as well as your choice of black or white numerals and background face. These tachs are compatible with all Holley EFI touch screens, dashes, hand-held tuners, and other CAN devices—making them great for Holley EFI users looking to install a combination of needle gauges and LCD accessories. Holley EFI tachometer additional details: * Will work with both distributor and distributor-less ignitions without requiring any special tach adapters * Practically universal, works with most gasoline engines—and is programmable from 0.5 to 6 pulses-per-revolution (PPR) * Slim-style mounting requires very little dash space for installation * 240-degree sweep pointer from 8 to 4 o'clock makes gauges more natural to read at a glance * Internal microprocessor ensures accurate pointer movement in street and racing conditions * Spin-lock ring threads to the back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum threaded bezels with anodized finish
( 4 )
$291.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
