Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
44 Results Found For "low"
Showing In Stock Items. Show All 60 Items.
Flex-A-Lite Low-Profile S-Blade Electric Fans
For lots of cooling power in a little bit of space, install Flex-A-Lite low-profile S-Blade universal electric fans. They're only 2 5/8 in. deep, but the 15 in. wide x 13 1/2 in. high single fans move 1,250 cfm at 11 amps, while the 26 1/4 in. wide x 15 1/2 in. high dual fans move 2,500 cfm. The glass-reinforced nylon S-blades make all of that air move quietly and efficiently, and most fans include rigid brackets and through-core installation kits.
( 19 )
$341.99
—
$438.99
Low Range Off-Road Radiators
Low Range Off-Road decided to start from scratch when they engineered their radiators. These coolant units are built with thicker aluminum—and are fully welded from the outside, not the inside, which allows you to see the quality of those welds. The radiators include a cap and pressed-in nuts for your shroud or one of the Low Range electric fan mounts. These performance radiators are made entirely from aluminum—no plastic, no brazing—and come with a lower drain petcock. Order the model recommended for your vehicle.
Not Yet Reviewed
$286.90
March Performance Air Conditioning Compressor Brackets
March Performance air conditioning compressor brackets are precision CNC-machined from solid billet 6061-T6 aluminum and then powdercoated for a superior finish. Quit scavenging junkyards and swap meet part bins trying to locate the correct A/C compressor bracket to fit your vehicle's application. Check out March Performance first!
( 2 )
$307.99
ICT Billet Air Conditioning Compressor Brackets
LS1 conversions are extremely popular for cars, trucks, and Jeeps. ICT Billet air conditioning compressor brackets are designed for setups without the stock LS A/C compressor. These brackets are milled from aerospace-grade billet aluminum for impressive strength and longevity. Units are available to be used with LS1 Camaro or truck crank pulleys. ICT Billet air conditioning compressor brackets will keep accessories safe and secure.
( 28 )
$359.99
Proform Brushless Electric Fans
Proform's brushless motor electric cooling fans deliver more cfm than the competition for maximum cooling. These brushless fans are lightweight, low-profile, no amp spikes, and create cooling unlike anything out there. The best part is, they are totally universal and designed for 12-volt systems. No fancy engine specific controller required, just wire up the (+) and (-), and you're good to go. Soft start ramp up prevents amp spikes. The brushless electric fans are designed to fit the most popular cars and trucks. Order the electric fan model designed for your application needs. Product features and benefits: * Prevents overheating in stop-and-go traffic * Designed to fit the most popular cars and trucks * Frees the water pump pulley for more rpm * Thin design to fit cramped locations * Reinforced glass filled polypropylene blade and plastic housing for minimized weight * Nylon tie mounting kit included * Installs in minutes with simple hand tools Note: This is strictly a puller fan and is not reversible. Not compatible with variable speed fan controllers using PWM technology. Works with normal on/off thermostat controllers.
( 87 )
$359.95
On Sale
Summit Bucks
Mishimoto Oil Cooler Kits
Enthusiasts who push their high performance cars to the limit understand the importance of keeping their oil temperatures low to prevent damage, or even seizure of the engine. Mishimoto oil cooler kits are designed to extend the life of your engine by ensuring that your essential high-wear engine components, such as piston rings, skirts, and cam bearings, are sufficiently lubricated with cooler oil. The kits include a durable aluminum oil cooler, stainless steel braided hose lines, fittings, and all necessary adapters. Models are also available to cool transmission oil/fluid. Order the universal or vehicle-specific cooler that's best suited for your application.
( 47 )
$362.95
$291.95
—
$491.74
Edelbrock Victor Series High Performance Street Mechanical Water Pumps
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 182 )
$260.95
—
$499.95
Maradyne Jetstreme Electric Fans
Maradyne Jetstreme electric fans feature a low-profile design to allow for turbo or supercharger installations. They use a sealed motor tested in accordance with DIN EN 60529 and are dust and waterproof to IP68. The fans utilize an S-blade design for quieter operation and have a rubber seal that eliminates vibration contact and increases airflow. Maradyne Jetstreme electric fans have all glass-filled nylon construction for maximum durability.
( 18 )
$257.47
—
$485.52
On Sale
Summit Bucks
Mishimoto Performance Radiators
Mishimoto performance radiators are designed and engineered to maximize cooling efficiency, boost engine functions, and, most of all, protect your engine from overheating. Many stock radiators can't handle the additional heat that comes higher horsepower levels. So, swap out your stock radiator for an all-aluminum Mishimoto. Key features and benefits of Mishimoto performance radiators include: * Available for universal and exact fit applications (no cutting or modifications required) * All-aluminum construction for optimal heat dissipation, improved strength, and reliability * Increased cooling capacity due to their massive core size * 100 percent brazed aluminum core for minimal distortion, low stress, and clean joints * Available in various sizes with 2-row or 3-row cores * TIG-welded for clean, strong welds and increased durability * Magnetic drain plugs capture metallic debris or fragments * Included high-pressure 1.3 bar cap raises the coolant boiling point for greater safety and efficiency * Automatic transmission and accessory coolers included where applicable
( 338 )
$529.95
$258.29
—
$499.95
CSF Fluid Coolers
CSF fluid coolers are part of a broad range that includes several designed, developed, and track proven in collaboration with BMW tuning specialists and parts manufacturers. Available coolers include: * Dual-pass, race-spec, DCT transmission coolers--a number are plug-and-play and include oil-line connections, mounting brackets, shrouds, and ducting * All-aluminum, controlled atmosphere brazed (CAB) dual-pass, plug-and-play, power steering coolers * Dual-pass, all-aluminum, race-spec engine oil coolers with cast end-tanks * Advanced and unique, dual-fluid, heavy-duty oil coolers with built-in fittings and included SPAL fan and sealed shroud. Additional features and benefits of CSF fluid coolers include: * Drop-in fit coolers require no modifications to install; They fit OE bumpers and accept factory oil-line connections, mounting brackets, shrouds, and ducts … even aftermarket splitters * Many feature dual-pass, high-performance cores that replace OEM single-pass designs for maximum surface area and flow * OE low-efficiency, mechanically bonded cores replaced with CAB-brazed, high-efficiency, turbulated, heavy-duty, bar and plate design cores for the most reliable and durable coolers available (on specific applications) * High-density, multi-louvered fin design with more surface area than OE units * Where applicable, fully TIG-welded end-tanks vs. OE mechanically jointed and tack-welded tanks for superior reliability and durability * Select applications include CSF's A/C condenser technology using super-high pressure, multi-channel micro-tubes * Lab tested to be more efficient than OEM coolers
( 2 )
$299.00
—
$499.00
CVR Proflo Maximum Water Pumps
CVR's Proflo maximum water pumps give you the flow that you need without costing you horsepower. CNC-machined from T6-6061 billet aluminum, these lightweight pumps have a direct-drive 12 V motor that draws a low 6.1 amps. The Proflo maximum water pumps feature a computer-designed machined billet impeller, a stainless steel shaft, and a carbon ceramic seal that offers a 10,000-hour life expectancy. These CVR Proflo maximum water pumps are available in different colors and sizes. The pumps feature a modular design and can be mounted on a number of different engine applications. Amazingly, these pumps can also be mounted in remote locations. Stainless steel fasteners are included. Additionally, the inlet fittings can be changed between the passenger and driver side to suit your radiator outlet. Proflo maximum water pumps are the cooling system components that your ride craves!
( 17 )
$309.99
—
$355.99
PRW High Performance Mechanical Water Pumps
PRW High Performance mechanical water pumps are engineered to deliver increased water flow faster. These super velocity pumps significantly improve cooling for all street, high performance, and racing applications. The low pressure-injected, A356 aluminum alloy pump bodies are complemented by a precision, high-flow cast iron impeller design. Pressure-balanced water passages equalize flow and minimize engine hot spots at any speed. PRW High Performance mechanical water pumps are excellent alternatives for not only racers, but also trucks, towing, and motorhome applications. Order the model recommended for your specific vehicle and engine size. Features, items, and specs: * 35 gpm at 4,000 rpm with minimal cavitation and proportional increased flow rates at 5,000+ rpm * Aircraft industry tolerances * Heavy-duty 0.75 in. diameter steel shafts * Billet steel hubs and shielded-seal roller ball bearings * Back plate O-ring sealed for most applications * System Basis Chip (SBC) applications include adjustable hardware
( 31 )
$267.71
—
$302.02
FTI Performance Transmission Coolers
FTI Performance automatic transmission oil coolers offer superior cooling power with their plate-type construction. They're made from lightweight aluminum, feature large inlet and outlet ports, and are painted black for maximum heat transfer. Multiple cooling paths give them the cooling capacity of larger fin-and-tube coolers. And, because they have a low pressure-drop design, there is less oiling system restriction. Order the cooler individually or in a complete kit.
( 1 )
$339.00
Edelbrock Victor Series Mechanical Water Pumps with PermaStar
These Edelbrock Victor series high-volume water pumps with PermaStar are designed for maximum flow and equal coolant distribution in street cars, racecars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined, cast iron impellers are larger than other impellers, and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leak-proof seals and gaskets. The PermaStar finish is a high performance coating that gives a super show quality smoked chrome looking finish that will not oxidize or fade and cleans easily.
( 12 )
$365.95
—
$430.95
Be Cool Plus Brushless Series Fans
Be Cool Plus Brushless Series Fans are ideal for applications where low power consumption, low weight, fuel economy, advanced electronic control, and high efficiency are needed. The brushless motor design drastically increases motor life and limits the amount of wearable components. They also feature completely sealed waterproof motors with integrated power and signal electronics. Other features include: * Soft Start Technology that eliminates initial electrical inrush spike * IP68-Certified waterproof motors * PWM-controlled for smooth and reliable operation * Full variable speed control * Reduced axial dimensions * High efficiency, low noise, and excellent resistance to vibration and harshness
( 1 )
$369.99
—
$499.99
Moroso Cooling System Expansion Tanks
These expansion tanks are perfect for cars with low-mount radiators to provide a convenient filling location and to bleed off unwanted air. Versions are now available with rugged 6061-T6 billet aluminum filler necks welded to the tank to withstand the continuous removal and installation of the cap. They're 100 percent pressure- tested to eliminate leaks, and they accept a standard-size radiator cap (not included).
( 107 )
$252.99
—
$467.99
Moeller Marine Livewells
Moeller Marine livewells deliver durable space-saving designs with easy access. They are constructed of seamless one-piece, rotationally-molded, low-density polyethylene (LLDPE) and are available in several popular sizes. Each of these wells features a recessed lid. Select models include molded-in deck fasteners for easy deck hold-down, as well as drain plugs for quick draining and cleaning. Moeller Marine livewells are available in white or light blue. LLDPE is a type of polymer resin (or thermoplastic) that becomes liquid when heated and solid when cooled, making it highly recyclable. LLDPE offers: * Excellent chemical and corrosion resistance * Durability * Fluid resistance * Impact strength
( 42 )
$274.99
EMP Stewart Electric Water Pumps
EMP Stewart electric water pumps can be used as stand-alone water pumps or as booster pumps for vehicles with low-speed cooling problems. These lightweight, robust pumps provide features and benefits not currently available on any other electric water pump. They have a 10,000+ hour lifespan and include universal remote mounting with single-speed flow up to 55 gpm. These pumps are available hand-polished or anodized in red or black.
( 9 )
$442.99
—
$459.99
On Sale
Frostbite Fan and Shroud High Performance Packages
Heat is the enemy and Frostbite fan and shroud high performance packages equip your vehicle to beat the heat. Proper cooling systems are essential to maximize the performance and longevity of your ride. Frostbite electric fan and shroud combos can improve the efficiency of your radiator and eliminate parasitic power drain from factory-style mechanical cooling fans. Their high performance packages are direct fit applications for their existing 2 to 4-row aluminum radiators and feature low-profile, higher cfm performance fans. The shrouds are aircraft-quality aluminum made to form-fit the radiator. High horsepower street cars and trucks are often a challenge to keep cool, but not with Frostbite fan and shroud high performance packages.
( 14 )
$549.95
—
$699.95
$310.11
—
$466.00
Maradyne Jetstreme II Fans
Maradyne Jetstreme II fans are available in sizes to fit a wide range of vehicles. The low-profile single or dual electric cooling fans feature a rubber seal that eliminates vibration and increases airflow. Their shrouded quiet, sickle blade design works as a puller to ensure top performance from your radiator. The fans are constructed with durable glass-filled nylon—and include locking mating pigtail connector, molded brackets for mounting, and adjustable temperature switch and relay.
Not Yet Reviewed
$432.80
Mishimoto Universal Oil Coolers
Mishimoto universal oil coolers protect your vehicle from extreme temperatures that could damage your engine. Pushing your high performance car to the limit requires low oil temperatures to prevent failure or even seizure of the engine. Mishimoto universal oil coolers ensure that your essential high-wear engine components are sufficiently lubricated with cooler oil. Their auxiliary coolers are offered in up to 25-row models with the "M" logo on one side. Order the model that's best suited for your vehicle application.
( 14 )
$254.95
—
$428.95
Delphi Air Conditioning Compressors
Delphi air conditioning compressors meet and exceed OE specifications and your own expectations. Constructed with high-quality, corrosion-resistant aluminum alloy, these compressors offer high pumping capacity to cool your passenger compartment quickly—and a low torque demand to maximize your fuel economy. Delphi A/C compressors have a proven clutch design for more clutch life and less squeak. Plus, they contain a full-system charge of oil and (where applicable) O-rings/sealing washers, making installation a breeze! For an OE-exact fit that won't disappoint, choose a replacement conditioning compressor from Delphi.
( 6 )
$251.99
—
$339.99
Summit Racing™ Aluminum Shroud and Fan Combos
Summit Racing™ offers aluminum fan shroud and thin-style fan combos in a variety of sizes and configurations. They not only look great, but also deliver affordable cooling for your vehicle. The low-profile shrouds feature sturdy aluminum construction, rubber mounting seals, and mounting hardware. They're available in different finishes, in single or dual fan layouts. The shrouds and fans easily mount to Summit Racing™ universal radiators.
( 12 )
$295.95
Vintage Air Top-Mount Compressor Brackets
Keep your compressor in its place with the support of Vintage Air compressor brackets. Manufactured from steel plate with smooth finished edges to fit properly, these brackets are available in several styles--low-mount, side-mount, top-mount, and universal--to fit most applications of Chevy, Ford, Mopar, and more. Vintage Air also offers Steel-eez brackets made from laser-cut, jig-welded steel to mount your popular Sanden 508. The brackets include mounting hardware. For brackets that you know will fit and last, check out Vintage Air compressor brackets.
( 8 )
$302.99
