Availability
Showing In Stock Items. Show All 13 Items.
Walbro FRB Series fuel pumps are designed for applications where battery life, low noise, and durability are important. They're reverse polarity-protected up to 60 minutes with self-priming (dry lift) of more than 48 in. (120 cm). They can also dry run up to 4 hours, and are compatible with all commercially available pump-grade gasoline, gasohol, diesel, and bio-diesel fuels. When you're looking for reciprocating fuel pumps, check out all that Walbro FRB Series fuel pumps have to offer. Order the pump designed to fit your application. Product features and specs: * Pump cycles only when fuel is demanded * Replaceable in-pump filter for durability in dirty-fuel conditions * Operating temperature: -40 degrees to 155 degrees F (-40 degrees to 70 degrees C) * Transient voltage protected to 100 V * Current draw (less than 2 amps average) up to 70 percent less than their FRA and FRC models * Continuous duty life (diesel fuel) greater than 18,000 hrs.
( 17 )
$259.99
—
$289.99
Holley Sniper HyperSpark plug-and-play main wiring harnesses were designed to make upgrading your ignition on a Sniper EFI-equipped engine easy. When this harness is installed concurrently with a new Sniper EFI system, the combination creates the easiest to install EFI conversion on the market—only four flying lead connections required! Key features: * Harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power * Pre-terminated connectors and a built in 40A relay provides power to all of the components within the system * With the included Sniper EFI main harness, you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay * Just route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in
( 2 )
$320.95
Hybrid Racing offers cold air intake systems for a variety of applications, including select Honda© and Acura© models. Designing an intake system with a set of guidelines isn't hard to achieve. However, building an intake system that not only fits every engine combination while allowing that setup to produce more power is. Hybrid chose to narrow that field and focus on the best recipe for power gains. Combined with its high-flow velocity air filter, these cold air intake systems have shown gains of up to 10 percent (5-10 hp) across the powerband compared to a short ram system, while significantly reducing intake air temperatures. Don't want to relocate your battery? No problem. The Hybrid Racing RSX intake allows for the battery to stay in the OEM location. These intakes require a 70mm or larger throttle body and the RBC/RRC style intake manifolds. Fitment or compatibility with an OEM PRB intake is not guaranteed. Slight trimming of the LH inner fender lining is required, and the removal or relocation of the OEM windshield washer bottle is needed. Alterations to cars running OEM Type R brake cooling ducts may be necessary. The included radiator hose fits the K20A/A2/A3/Z1 water neck. It may not fit the K20Z3/K24 water neck. What's included? 1 – 3 in. Hybrid Racing silicone cold air intake tube 1 – Velocity stack air filter 1 – Silicone upper radiator hose (for PRB style coolant neck) 1 – Valve cover breather filter 1 – Lower filter bracket 1 – Anti-vibration clamp 1 – Stainless T-bolt clamp 2 – Silicone hoses for breather connections 2 – Machined aluminum push-in fittings 5 – Hose clamps 2 – Bolts 3 – Washers
Not Yet Reviewed
$358.14
Improve the performance of your nitrous oxide system with one of these Nitrous Express SAFE (Stand Alone Fuel Enrichment) systems. They feature a one gallon, high-strength composite fuel cell that can be mounted in most factory battery trays without modification. The systems are also available with a high-output, internally mounted fuel pump and an adjustable external regulator, making installation quick and simple. When used with gasoline, they can support up to 800 nitrous horsepower. When used with methanol, they will support up to 400 nitrous horsepower. When used with race gas or methanol, the need to retard timing is significantly reduced. Often, on V8 engines using nitrous boosts of 150 hp and above, zero timing retard is required. The Nitrous Express SAFE (Stand Alone Fuel Enrichment) systems reduce the need to upgrade OEM fuel pumps and will completely eliminate pressure drop at the fuel rail in EFI vehicles. They also include an integrated fuel level gauge and all mounting hardware for a no-hassle installation.
( 7 )
$566.46
Jeeps are built for adventure, but stock setups have their limitations. aFe Dynamic Air Scoop snorkels help your Jeep overcome those limits by providing increased protection and airflow for your engine. With a snorkel you can tackle any terrain knowing that your engine is safe from harmful elements, and you'll be ready for whatever the trail throws your way. aFe D.A.S. snorkels boost engine performance and protection, offer easy maintenance along with a simple installation, and a precision fit that ensures each snorkel blends seamlessly with your Jeep's contours, enhancing the rugged aesthetic while delivering exceptional performance. Features: * Forward-facing inlet optimizes airflow to the engine, boosting efficiency, especially at higher speeds * The snorkel's fully sealable system and removable drain plug allow for safe deep-water crossings * No-cut, no-drill cowl pass-through design integrates with the factory airbox, making installation easy and reversible, ensuring original setup remains intact * Premium materials ensure the snorkel withstands the toughest environments * A removable runner section provides quick access to the battery and fuse box * Interchangeable grille and bezel let you personalize the snorkel to suit your style
( 2 )
$535.00
JMS Chip progressive nitrous controllers are simple to use! There are no external relays, triggers, or RPM switches required—everything's in there. You don't need a laptop, either; all adjustments can be made with the included small flat screwdriver on the controller. Plus, they're compatible with all 12 V and 16 V battery systems and 1- to 16-cylinder engines. With more features than standard controllers, JMS Chip progressive nitrous controllers allow for maximum adjustability, while combining all of the popular nitrous add-ons into one device, permitting you to outperform the competition.
( 1 )
$399.75
Hybrid Racing offers cold air intake systems for a variety of racing and off-road applications, including select Honda© and Acura© models. Engineers spent countless hours testing and refining this design to ensure it was the absolute best intake available for the 8th Gen Civic Si platform. These intakes are designed to make big gains on any setup, from totally stock to high-lift cams and huge exhausts. Dyno graphs are provided to show the intake's effectiveness against its competitors, but for example, Hybrid saw 14 hp peak gain and 9 hp average gain against the stock air box. Against competing 3.5 in. cold air intakes, Hybrid saw typical peak and average gains of around 2-3 hp with a much smoother power band—meaning more power and better drivability. The first and perhaps most obvious feature of these intakes its full silicone construction. The 1/4 in. thick fiberglass-reinforced silicone tubing is sturdy enough to withstand engine vacuum and insulates your intake charge better than any metal or plastic intake on the market. This leads to very cold intake air temperatures, meaning a denser air charge and more overall power. Another power-adding feature is the included velocity stack. The 6 in. velocity stack is designed to lower inlet restrictions and allow more air into your engine, again leading to a denser, more powerful inlet charge. One very cool component in each kit is the injection molded air bypass manifold. These manifolds serve a number of functions. They provide attachment points for the factory MAF, as well as for the (included) silicone tubing that attaches to the factory valve cover vent and air bypass valve. They also have a built-in air bypass feature that allows air into the engine when the intake's filter becomes wet. This helps to avoid the dreaded hydro-lock that so many people normally worry about in heavy rain. Hybrid Racing tested the bypass valve by totally submerging an air filter in a bucket of water and running the motor. Even when totally submerged, the engine idled and rev'd safely without hydro-locking. Of course, it's still advised to practice caution when going through deep water in any car! The biggest gain the bypass manifolds provide is the reduction of parasitic Helmholtz resonance. The internal geometry of the air bypass manifold is designed to smooth out your power band. The end result is an intake that (on average) makes up to 14 hp over the stock air box and even 2-3 more horsepower than any other 3.5 in. intakes. Also included with each kit is a powdercoated steel battery tray that relocates the battery in front of the transmission to make room for this intake's massive piping. Hybrid also provides a silicone upper radiator hose to give better clearance than the stock radiator hose. Silicone tubing is provided to replace the OEM rubber valve cover breather and air bypass tube. This gives the engine bay a cleaner, more finished appearance. The kit includes all of the bolts, hose clamps, and hardware needed to install the intake and battery tray. Notes: * You will need a tuning software like Hondata's Flash Pro to tune the car after installation. This kit should be run using MAP tunes only and should not be used with the factory ECU calibration. Please note, this system is sold as a complete kit and is not offered in pieces. * Full silicone construction * Most powerful 8th Gen intake on the market * Built-in air bypass helps to prevent hydro-locking * Includes 3.5 in. velocity stack and filter
Not Yet Reviewed
$265.99
The Milwaukee brushless M18 stick transfer pumps deliver superior filtration for the fastest handheld pumping in trenches, vaults, utility pole holes, and more. Powered by Milwaukee's M18 battery platform and brushless motor technology, the M18 stick water pumps transfer up to 25 gallons per minute and up to 1000 gallons on one M18 REDLITHIUM FORGE HD12.0 battery (sold separately). Equipped with HYDROPASS filter technology, the pump's 360 degree filter maximizes flow in heavy debris, minimizing downtime caused by clogging. With a 48 in. submersible reach, the stick transfer pumps provide the extension needed to reach water at the bottom of trenches and difficult-to-reach areas. Compatible with a 1 1/4 in. discharge hose or up to two 3/4 in. standard garden hoses using the included Y-adapter, transfer water farther to the ideal deposit location with a 17 ft. maximum head height. Product Highlights: * Brushless motor delivers more power and longer life * Simple setup: push-to-start * Easily transport across the jobsite * Drain up to 1000-gallon of water on (1) M18 REDLITHIUM FORGE HD12.0 battery pack (sold separately) * HYDROPASS filter shields against clogs—360-degree design maximizes flow in heavy debris * Pump up to 1000 gallons on (1) M18 REDLITHIUM FORGE 12.0 Battery (sold separately) * 17 ft. max head height * 1 1/4 in. NPT threaded outlet for max flowrate, threaded Y-adapter for 3/4 in. standard garden hose use * 48 in. submersible reach for easier inlet control * Threaded filter designed for easy removal
Not Yet Reviewed
$429.00
Nitrous Outlet digital inline nitrous pressure gauges give you an accurate measurement to within +/-.2 percent and are battery-powered for a clean install. The LCD backlit gauges install inline with your nitrous system's main feed line, and are available with fittings for -4 AN, -6 AN, and -8 AN lines. The precise readings allow drivers to monitor nitrous pressure and close the main feed line if needed.
( 1 )
$425.99
—
$496.99
The APR Throttle Response Booster instantly transforms the way your vehicle feels by customizing how quickly your throttle or accelerator pedal works. Simply plug it in and either use the wireless controller or smart phone app to set or customize how the pedal feels. Most people don't like the way their throttle pedal feels; and while tuning can help eliminate lag, everyone has a different opinion about how it should feel. This throttle booster device lets you set it exactly the way you want and allows you to quickly switch between profiles. Set it to stock, sport modes, extreme modes, and eco modes with ease. Best of all, it's a quick plug-and-play device that can be removed at any time. Additional details: * Improves throttle response and transforms the feel of the vehicle * Multiple switchable profiles, including various sport modes, eco modes, and custom maps * Custom throttle mapping allows you to perfectly tune your throttle pedal * Thin and classy wireless controller * Bluetooth iOS and Android mobile app * No clunky boxes, wires, or controllers like other devices * Connects to the throttle harness, leaving your OBDII port free * Quick and easy plug-and-play design that is removable without a trace * Works on gas, diesel, alternative fuel, and electric vehicles
Not Yet Reviewed
$274.95
Standard Motor fuel vapor canisters are designed to store fuel vapors from the engine and keep them from venting into the atmosphere. Manufactured with the highest grade materials for prolonged life and superior performance, Standard fuel vapor canisters meet or exceed original equipment specifications and fit in the OE location.
( 31 )
$305.99
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 247 )
$263.99
—
$336.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
