Availability
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$603.95
$258.95
—
$448.95
On Sale
Vehicles that endure prolonged sessions of braking, turning, and accelerating need extra protection from oil starvation. That's where Holley retrofit oil pan baffle kits for the GM LS engines come in handy. They are designed to maintain proper oil level at the oil pump pickup during vehicle accelerations, both lateral and linear. The baffle maintains the oil at the oil pump pickup preventing loss of engine oil pressure during maximum cornering in a high performance touring or road racing, as well as under hard acceleration in drag racing vehicles. The baffle is fabricated from sheet aluminum joined by TIG-welded joints. Directionally positioned one-way trap doors allow oil flow towards the oil pump pickup but not away.
( 4 )
$349.95
—
$380.95
$314.95
—
$342.85
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$435.95
—
$514.95
$391.95
—
$462.95
On Sale
Holley has responded to the expanding LS marketplace by developing the most complete line-up of LS performance upgrades and engine swap products, including Holley LS engine power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low LS accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps will also work with Holley's special LS reservoir kit.
( 8 )
$390.95
—
$449.95
$292.95
—
$351.85
On Sale
Holley Gen V LT accessory drive installation kits allow the use of high-mount LS accessory drive systems on LT engines. These kits allow you to choose the source for supplemental accessories and components that are often already on a donor engine or host vehicle. This drive system has incorporated an upgrade to the conventional looking and central located (Camaro style) LS water pump that works in conjunction with an OEM LT1 truck harmonic balancer. Holley Gen V LT accessory drive installation kits include spacers for the LS style brackets, water pump spacers, solenoid reclocking retainer ring, re-routed front harness, and all hardware. Other features: * No engine modification required * Hides temperature sensor and harness connector from site * Cost effective and proven solution * Utilizes conventional single sided belt * Easy way to add power steering with your Gen V LT swap
Not Yet Reviewed
$289.95
$260.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$517.95
$284.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
