Availability
On Sale
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 3 )
$296.10
—
$580.65
$266.49
—
$522.59
On Sale
The aFe Power Scorcher GT Plus is a plug-and-play power module that is a simple upgrade for your Jeep, providing instant performance gains and enhanced drivability at the press of a button. Combining the advantages of aFe's Scorcher power modules with a built-in throttle enhancer, the Scorcher GT Plus is your ticket to a finely tuned driving experience. With this all-in-one unit, your performance gains won't be dulled by a lazy throttle pedal that all newer vehicles are plagued with from the factory due to the drive-by-wire system. Equipped with four distinct power settings, each paired with a corresponding throttle configuration, these modules give you the ability to fine-tune your vehicle's performance. Whether you're cruising in Sport mode or tapping into your vehicle's full potential in Race Mode, the in-cabin switch offers seamless control, making your vehicle's performance truly tailored to the driving conditions and your driving style. Order the model recommended for your application. * Plug-and-Play Installation: Utilizing OE-style connectors, the Scorcher GT Plus offers plug-and-play installation by simply plugging into your vehicles' corresponding sensors and gas pedal. The installation does not require splicing wires or any modification of the vehicle's electrical system, keeping all factory connections intact. Installation can be easily reversed in minutes should the module need to be removed. * In-Cabin On-the-Fly Power Adjustment: The included LED controller mounts in the cabin for easy on-the-fly selection of the four distinct power settings and their corresponding throttle configuration—Stock (Green), Sport (Yellow), Sport+ (Orange), Race (Red). * High-Quality Case and Wire Harness: aFe Scorcher GT Plus modules use a high-quality enclosed casing and factory-style connectors which require no modification to your factory harness. These factory-style connectors plug directly into the stock wiring harness connectors and sensors. Additional notes: * Dyno tested and produced power increases of 18 hp / 17 lbs.-ft. torque * Alters MAP, IAT, and throttle position sensor signals to improve vehicle performance, efficiency and throttle response * ON/OFF button on the case * Leaves no trace on ECU (no footprint) * High reliability, 100 percent of units tested * Compatible with other aFe Power performance products
Not Yet Reviewed
$461.00
—
$499.00
$414.90
—
$449.10
On Sale
The aFe Scorcher HD Plus modules are a plug-and-play power module that utilizes OE-style connectors and are a simple upgrade providing instant performance gains and enhanced drivability at the press of a button. Combining the advantages of aFe's Scorcher power modules with a built-in throttle enhancer, the Scorcher HD Plus is your ticket to a finely tuned driving experience. With this all-in-one unit, your performance gains won't be dulled by a lazy throttle pedal that all newer vehicles are plagued with from the factory due to the drive-by-wire system. The aFe Scorcher HD Plus power modules are equipped with four distinct power settings, each paired with a corresponding throttle configuration to give you the ability to fine tune your vehicle's performance. Whether you're cruising in Sport mode or tapping into your vehicle's full potential in Race mode, the in-cabin switch offers seamless control, making your vehicle's performance truly tailored to the driving conditions and your driving style. Features: * High-quality case and wire harness with OEM style connectors * Quick plug-and-play installation—simply plug into your vehicles' corresponding sensors and gas pedal * The installation does not require splicing wires or any modification of the vehicle's electrical system, keeping all factory connections intact * Included LED controller mounts in the cabin for easy on-the-fly selection of the four distinct power settings and their corresponding throttle configuration: Stock (Green), Sport (Yellow), Sport+ (Orange), Race (Red) * In-cabin on-the-fly power adjustment via LED light switch * Increase turbo boost, fuel pressure, and throttle position sensor signal to improve vehicle performance, efficiency, and throttle response * Dyno tested and produced power increases of +33 hp and +77 lbs. x ft. torque * Installation can be easily reversed in minutes should the module need to be removed—leaves no trace on ECU (no footprint) * Compatible with other aFe Power performance products
Not Yet Reviewed
$499.00
$449.10
On Sale
aFe Scorcher HD modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin, on-the-fly power adjustments. The four power settings are adjustable with one button and the LED light represent the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher HD modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure to improve vehicle efficiency, power, and throttle response. They use a high-quality aluminum extrusion black powdercoated enclosure casing and factory-style connectors which requires no modification to your factory harness. These factory-style connectors plug directly into the stock wiring harness connectors and sensors.
( 2 )
$461.00
$414.90
On Sale
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$350.00
—
$553.00
$315.00
—
$497.70
On Sale
Momentum Pro 5R air intake systems from aFe are designed around a large pre-oiled 7.5 in. tall, oval, cotton media filter with five layers of progressively finer mesh to maximize performance. These incredible filters fit into equally impressive one-piece housings with auxiliary air scoops and large clear sight windows. When combined with the housings, these aFe air intake systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro 5R air intake systems.
( 12 )
$361.00
—
$475.00
$324.90
—
$427.50
On Sale
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$323.00
—
$593.00
$290.70
—
$533.70
On Sale
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$573.00
$324.90
—
$515.70
On Sale
aFe Momentum HD Pro 5R air intake systems are designed to give your Cummins, Power Stroke, or Duramax the air it demands. All Momentum HD systems are application-specific, dyno-tested, and tuned to provide maximum horsepower and torque. The Momentum HD Pro 5R intakes are designed around massive Pro 5R performance 360 degree, radial-flow air filters with five layers of progressively finer, mesh cotton media. Their unique air filter-to-housing interface (patent pending) allows for maximum filter size that increases the available air volume while simplifying the installation process. The air filters are wrapped in reinforced metal providing maximum strength to prevent filter collapse. Features and benefits include: * Larger filter—more capacity * One-piece sealed housing uses factory mounting points for hassle-free installation * Large, clear sight window for hassle-free filter inspection and aggressive style * High-quality, CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit * Premium clamps and a silicone elbow coupling for flexibility and secure installation * Most systems are available with an auxiliary air scoop (sold separately) * Urethane plug included to block off the auxiliary air inlet and completely seal the air box * Ideal for extreme performance without compromising style
( 2 )
$408.00
—
$553.00
$367.20
—
$497.70
On Sale
aFe Pro Series deep transmission pans bring performance engineering to the protection of your truck's transmission. Each pan offers increased fluid capacity over stock, and features internal and external fins that transfer heat from the fluid to the ambient air for maximum cooling. aFe Pro Series transmission pans are constructed out of durable aluminum with reinforced ribs for maximum strength, and are finished with a black powdercoat accented by machined fins for protection and styling. Select the one designed for your transmission. Additional notes: * Neodymium magnetic drain plug captures loose particles for maximum transmission protection * Threaded 1/8 in. NPT port is ready for use with your transmission temperature sensor * All necessary hardware
( 9 )
$379.05
—
$484.05
$341.15
—
$435.65
On Sale
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$282.00
—
$593.00
$253.80
—
$533.70
On Sale
Jeeps are built for adventure, but stock setups have their limitations. aFe Dynamic Air Scoop snorkels help your Jeep overcome those limits by providing increased protection and airflow for your engine. With a snorkel you can tackle any terrain knowing that your engine is safe from harmful elements, and you'll be ready for whatever the trail throws your way. aFe D.A.S. snorkels boost engine performance and protection, offer easy maintenance along with a simple installation, and a precision fit that ensures each snorkel blends seamlessly with your Jeep's contours, enhancing the rugged aesthetic while delivering exceptional performance. Features: * Forward-facing inlet optimizes airflow to the engine, boosting efficiency, especially at higher speeds * The snorkel's fully sealable system and removable drain plug allow for safe deep-water crossings * No-cut, no-drill cowl pass-through design integrates with the factory airbox, making installation easy and reversible, ensuring original setup remains intact * Premium materials ensure the snorkel withstands the toughest environments * A removable runner section provides quick access to the battery and fuse box * Interchangeable grille and bezel let you personalize the snorkel to suit your style
( 2 )
$535.00
$481.50
On Sale
aFe Power offers throttle bodies for a variety of applications, including many Toyota vehicles from 2003 and up. Product details (model 46-39103): * Brand new 76mm throttle body * No tuning required * Plug-n-play electronics * Billet aluminum adapter * More power and better throttle response * Hardware and gasket included * Direct bolt-on for simple installation * Larger bore throttle body: This aFe Power 76mm throttle body and adapter kit improves engine airflow over the stock 65mm throttle body. The extra airflow will increase horsepower and throttle response. This kit will work with OEM or aFe cold air intakes. Performance gains will be more noticeable as more upgrades are added to the vehicle. *6061-T6 billet aluminum adapter: All adapters are constructed from 6061-T6 billet aluminum and are precision-machined for light weight, high strength, and perfect fit and finish. The serrated/swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel, creating a more complete combustion cycle—increasing horsepower, torque, and improving throttle response. * Simple installation: Throttle body kit uses all factory mounting locations, providing stability and a hassle-free installation. All needed hardware is included with the kit. * Installation note: Idle will run high on some vehicles but will readjust once the ECU learns to properly control the idle (this can take up to 800 miles on some vehicles).
Not Yet Reviewed
$523.95
$373.28
—
$471.56
On Sale
aFe Magnum Force Stage 2 ST Pro 5R air intake systems outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, "oiled" conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. The systems are available for vehicles from the 1990s and up; order the model recommended for your application.
( 1 )
$372.00
—
$475.00
$334.80
—
$427.50
On Sale
aFe Large Bore-HD exhaust systems are constructed from mandrel-bent 409 stainless steel tubing with high-quality band clamps and OE-style bayonet hangers. They use factory mounting locations to provide a quick, hassle-free installation. Also included with many of these diesel systems is a massive wrinkle-black powdercoated or polished 304 stainless steel tip with a laser-cut stainless steel aFe power badge. aFe Large Bore-HD exhaust systems are the perfect combination of performance, fit, and value and feature: * Leak-free 360 degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Large diameter tubing provides maximum flow * Smooth bends for low turbulence, increased horsepower and torque, and lower exhaust gas temperatures (EGTs) * Slash-cut tips with intercooling vents reduce EGTs at the tailpipe (most applications) * Available in DPF-back, cat-back, turbo-back, and downpipe-back configurations (varies by model) * Select systems include dual outlets and exhaust tips Note: Some of these systems are "Race Only" products sold solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 12 )
$339.15
—
$601.65
$305.24
—
$541.49
On Sale
aFe Twisted Steel headers are constructed of 409 stainless steel tubing with thick, CNC-machined flanges to ensure a leak-free seal. They incorporate a merge collector design, reducing the turbulence that occurs when using the traditional form collector-style designs. The performance gains are obvious when coupled with a high-flow Y-pipe. The aFe headers feature a tuned length primary that is out-flowing the stock manifolds by as much as 46 percent. Order the style and configuration tailored to your vehicle and engine application.
( 20 )
$499.00
—
$573.00
$449.10
—
$515.70
On Sale
aFe Pro Series differential covers bring performance engineering to the protection of your axle's differentials. The durable cast aluminum construction with reinforced ribs provide maximum strength, while the machined fins and textured powdercoating provide a distinctive look. aFe Pro Series differential covers are available individually for front or rear with or without PRO Guard D2 synthetic 75W-90 oil and in complete sets with front, rear, and oil. Features: * Increased oil capacity * Internal/external ribs/fins transfer heat from oil to outside air for maximum cooling * Dual neodymium magnetic plugs--magnetic drain and deep reach fill plug—capture loose particles for maximum gear protection * Large oil level sight glass allows quick and easy oil inspection * Calibration plug set to the factory oil level to eliminate overfilling
( 20 )
$454.65
$292.95
—
$409.19
On Sale
The aFe Rock Basher exhaust systems are durable, purpose-built cat-backs for the 2018 Jeep Wrangler JL. They improve clearance over rough terrain for the adventurist who wants it all. The large 3 in. mandrel-bent 409 stainless steel tubing outflows restrictive factory exhausts, delivering gains of up to 9 hp and 8 lbs.-ft. of torque, as measured on aFe's in-house dyno. The free-flowing muffler delivers a power performance tone, while the Rock Basher's unique pre-axle turn-down tip handles off-road obstacles. These exhaust systems utilize factory mounts for a quick and easy install.
( 2 )
$428.40
—
$523.95
$385.56
—
$471.56
On Sale
aFe Control leveling kits are made from 6061 billet aluminum and provide a lift in the front for better off-road performance while also eliminating the "nose-down rake" notorious on stock trucks. Choose the set to fit your specific application. Features: * High-quality hardware for strength and durability * Red anodized finish for great looks * Increases front ground clearance * Easy bolt-on installation, requires no modifications, can be done at home with the proper tools and safety precautions * Installing these spacers does not require disassembly of the strut/spring
( 7 )
$296.10
$266.49
On Sale
aFe Street Series deep transmission pans bring performance engineering to the protection of your truck's transmission. Each pan offers increased fluid capacity over stock, and features internal and external fins that transfer heat from the fluid to the ambient air for maximum cooling. aFe Street Series transmission pans are constructed out of durable aluminum with reinforced ribs for maximum strength, and a raw finish accented by machined fins for protection and styling. Select the one designed for your transmission. Additional notes: * Neodymium magnetic drain plug captures loose particles for maximum transmission protection * Threaded 1/8 in. NPT port is ready for use with your transmission temperature sensor * All necessary hardware
( 11 )
$352.80
—
$403.20
$317.52
—
$362.88
On Sale
aFe Power offers supercharger power pulley kits for a wide range of applications—including many Dodge, Jeep, and Ram cars and trucks from 2015 and up. These bolt-on kits will enhance your engine's performance. By changing the pulley diameter, you can adjust the spin rate of the supercharger, resulting in increased boost and amplified power. The aFe pulley kits are meticulously crafted to achieve a perfect equilibrium of lightweight design and high strength through precision machining. You can count on them for optimal functionality, a flawless fit, and an impeccable finish, ensuring a seamless boost to your engine's power. The pulleys are available in a variety of diameters; order the model recommended for your vehicle. Additional details: * Pulleys crafted from high-quality 6061-T6 billet aluminum showcase exceptional characteristics. Through precision machining, these pulleys achieve a remarkable balance of light weight and high strength, ensuring not only optimal functionality but also a perfect fit and finish. * Pulley kits feature a 17-4 stainless steel hub, combining corrosion resistance and high strength through precision machining, ensuring a perfect fit, impeccable finish, and optimal functionality. * Please note that special tools are required for removing the factory pulley from the supercharger snout, and aFe recommends professional installation for the kit to ensure seamless performance. * Black hard anodized finish * Laser-etched logo and sizing * Includes screws, washers and Thread Locker * Tuning is recommended * Smaller belt not required
Not Yet Reviewed
$296.10
$266.49
On Sale
Get the most out of your diesel truck performance with aFe BladeRunner intercooler pipes. The connecting arms are fully mandrel-bent stainless steel or aluminum tubing that will outflow factory pipes, giving you more power and fuel efficiency. The intercooler pipes free-flowing design aids in decreasing EGTs to help protect your motor from power-robbing heat. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system. The kits come complete with the hardware needed for installation, and a powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes!
( 18 )
$580.65
$253.26
—
$522.59
On Sale
aFe Magnum Force Pro Dry S Stage 2 Si air intake systems feed your engine clean, cool air—and lots of it! These systems feature fully sealed intake housings that keep out warm air under the hood and bring in cooler outside air for a denser intake charge. They're fitted with a heat-insulating molded plastic intake tube and a unique turbo adapter that funnels air into the turbo for improved volumetric efficiency and maximum performance, while lowering intake air temperatures. And, keeping the air clean is the patented 360 degree Pro Dry S performance cone filter. With three layers of fine mesh synthetic oil-free media and polyurethane construction, these conical filters will last a long time and through multiple cleaning cycles. Assembly and installation are easy, as these systems use factory mounting points. Flow maximum oxygen to your engine with these Magnum Force Pro Dry S Stage 2 Si air intake systems from aFe.
( 3 )
$350.00
—
$499.00
$315.00
—
$449.10
On Sale
aFe Momentum HD Pro Dry S air intake systems are designed to give your Cummins, Power Stroke, or Duramax the air it demands. All Momentum HD systems are application-specific, dyno-tested, and tuned to provide maximum horsepower and torque. The Momentum HD Pro Dry S intakes are designed around massive Pro DRY S performance 360 degree, radial-flow air filters with three layers of progressive synthetic media providing 99.2 percent cumulative efficiency. Their unique, patent pending, air filter-to-housing interface allows for maximum filter size that increases the available air volume while simplifying the installation process. In addition, the air filters are wrapped in reinforced metal providing maximum strength to help prevent filter collapse. Features and benefits include: * Larger filter—more capacity * One-piece sealed housing uses factory mounting points for hassle-free installation * Large, clear sight window for hassle-free filter inspection and aggressive style * High-quality, CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit * Premium clamps and a silicone elbow coupling for flexibility and secure installation * Most systems are available with an auxiliary air scoop (sold separately) * Urethane plug included to block off the auxiliary air inlet and completely seal the air box * Ideal for extreme performance without compromising style
( 2 )
$408.00
—
$499.00
$367.20
—
$449.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
