Free Shipping on Orders Over $109 at Summit Racing

On Sale

Dinan Carbon Fiber Air Intake Systems

Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.

5.0 out of 5 stars ( 4 )

$2,254.95

—

$2,459.95

$2,028.95

—

$2,212.95

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$2,399.95

—

$2,609.95

$2,158.95

—

$2,347.95

On Sale

Holley Terminator X Max Stealth 4150 EFI Fuel Injection Systems

Holley Terminator X Max Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Max Stealth 4150 systems provide transmission control for later model GM 4L60E and 4L80E transmissions.

4.0 out of 5 stars ( 4 )

$2,399.95

—

$2,819.95

$2,158.95

—

$2,536.95

On Sale

Holley Terminator X Stealth 4150 EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated, and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Stealth 4150 systems also include transmission kick-down provisions for GM TH350, TH400, 200R4, 700R4, and Ford's C4 and C6 applications!

4.0 out of 5 stars ( 9 )

$2,509.95

$2,257.95

On Sale

Holley Terminator X Stealth 4150 2X4 EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 2x4 EFI systems feature eight 100 lb./hr. fuel injectors capable of supporting up to 1500 hp naturally aspirated or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Features: * Bolt-on 2x4 4150 flange carburetor replacement * Internal 1bar MAP sensor, built into the Terminator X ECU External fuel pressure regulator required, set to a base pressure of 58.5 psi * Integrated ignition timing control * High-resolution, full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard--answer a few questions about your engine, and it creates the base map, then starts tuning on its own without the use of a laptop * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and Fuel Pressure regulator, for years of dependable service * Weld-in oxygen sensor bung for the exhaust ensures a leak-free oxygen sensor install * Plug-and-play with Holley EFI accessories * Available in three finishes: Shiny, Black, and Gold

1.0 out of 5 stars ( 1 )

$3,149.95

$2,833.95

On Sale

Summit Racing™ Turbocharger Replacement Kits

Summit Racing™ turbocharger replacement kits are engineered packages with upgraded components needed to replace your high-mileage stock turbos. These one-click kits give you what you need to do the job correctly and address some of the shortcomings of the factory system. Check out the features below: * Brand new direct-fit turbos * Cast stainless exhaust manifolds improved flow and durability * Inconel manifold studs and stainless hardware kit * MLS stainless gaskets * Improved coolant line kits

Not Yet Reviewed

$2,341.92

$2,299.99

On Sale

Holley Terminator X Stealth 4500 EFI Fuel Injection Systems

Holley Terminator X Stealth 4500 EFI systems feature eight 100 lb. fuel injectors capable of supporting up to 1,500 hp naturally aspirated or 1,250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control—improving idle stability, drivability, and wide-open throttle horsepower! They are designed to fit with Gen 3 Ultra Dominator air cleaners and fuel crossovers, enabling you to easily convert your 4500 equipped 800+ horsepower dragster or door car. Choose from a black or polished aluminum body.

Not Yet Reviewed

$2,919.95

$2,626.95

On Sale

Holley Terminator X MAX Stealth 4150 24X LS EFI Fuel Injection Systems

Holley Terminator Max X Stealth 4150 24X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator Max X Stealth 4150 24X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications, as well as plug-and-play transmission control for GM 4L60 and 4L80 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * (4) inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * (4) Outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in 3 finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories

Not Yet Reviewed

$2,819.95

$2,536.95

On Sale

Holley Terminator X MAX Stealth 4150 58X LS EFI Fuel Injection Systems

Holley Terminator Max X Stealth 4150 58X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator Max X Stealth 4150 58X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications, as well as plug-and-play transmission control for GM 4L60 and 4L80 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories

5.0 out of 5 stars ( 1 )

$2,819.95

$2,536.95

On Sale

Holley Terminator X Stealth 4150 58X LS EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 58X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator X Stealth 4150 58X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories

Not Yet Reviewed

$2,299.95

$2,068.95

On Sale

Holley VR Series Billet Fuel Pumps

Holley VR Series billet fuel pumps feature brushless pump technology and a twin-screw rotor design. These in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. They are designed to work on high-boosted race cars, endurance cars, and daily drivers. VR pumps will work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event). The VR1 and VR2 models are capable of a consistent 130 psi, can be fully submerged in the fuel cell or chassis mounted, and feature race-worthy billet aluminum construction for lasting durability and looks. Whether running 300 or 3,000 hp, Holley has a brushless pump for you. Features include: * Pumps can be run in one of two different speeds * Low speed control for low fuel consumption requirements * Full speed for high fuel consumption requirements * Proven for 18.5 V compatibility * Provide sufficient fuel flow for forced induction applications * Built for continuous duty if required * Dual-pump models are designed for endurance racing—use both or one can be a reserve pump * AN O-ring inlet/outlet * High flow and high pressure with low amperage draw * Maximum amp draw of 19 amps for VR1 and 38 amps for VR2 pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.

5.0 out of 5 stars ( 1 )

$3,299.95

$2,968.95

On Sale

Holley Terminator X Stealth 4150 24X LS EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 24X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator X Stealth 4150 24X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories

Not Yet Reviewed

$2,299.95

$2,068.95

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$2,249.95

$2,023.95

On Sale

Holley Terminator X Stealth 4500 2x4 EFI Fuel Injection Systems

Holley Terminator X Stealth 4500 2x4 EFI fuel injection systems feature eight 100lb./hr. fuel injectors capable of supporting up to 1,500 hp naturally aspirated or 1,250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Holley Terminator X Stealth EFI systems are designed to fit with Gen 3 Ultra Dominator air cleaners and fuel crossovers, allowing you to easily convert your 4500 equipped 800+ hp dragster or door car! Features: * Bolt-on 4500 flange carburetor replacement for 2x4 intake manifolds * 2.125 in. throttle plates flow 1,440 cfm each for large cubic inch engines * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange offering many air cleaner options * Universal engine harness allows you to easily install the Terminator X 2x4 4500 system on a wide variety of engine combinations * Timing control support integrated within the ECU using supporting components * High-resolution, full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard--laptop not required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * Weld-in oxygen sensor bung for the exhaust ensures a leak-free installation * Plug-and-play with Holley EFI accessories (Pro Dash; CAN EGT; and Digital Analog-style EFI gauges) * Available in two finishes, Shiny and Black

Not Yet Reviewed

$3,749.95

$3,373.95

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$2,249.95

$2,023.95

On Sale

Holley HP EFI Universal Retrofit Engine Management Systems

Progammable EFI has been simplified! Holley HP EFI universal retrofit engine management kits make it easy to install multi-point fuel injection on your Mopar, Ford, or other type engine. Holley Performance universal retrofits are designed for 4150 and 4500 carburetor-style intakes. HP kits include injector bungs and un-machined fuel rails, so you can modify them to fit any single plane 4-barrel intake manifold. You'll also receive all necessary wiring, ECU, sensors, and a throttle body. Retrofit your engine for maximum performance with complete tunability via your laptop, or opt for self-tuning capabilities and rest assured that your fuel curves are accurate. It's a new era in fuel injection and it comes with a very appealing price tag, compliments of Holley and HP EFI universal retrofit engine management systems.

Not Yet Reviewed

$3,749.95

$3,373.95

On Sale

Summit Bucks

Mishimoto Intercooler and Pipe Kits

Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.

Not Yet Reviewed

$2,199.95

$2,087.68

On Sale

Holley LS Engine Swap Accessory Drive Systems

Now available from Holley are LS engine swap accessory drive systems. Included are accessories and pulleys that are manufactured by OEM part suppliers for durability and direct bolt-on installation. Order the kit that's best suited for your vehicle and engine application. Features and facts: * Universal brackets fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets--thus reducing cost and complexity compared with competitive products * Simple, dedicated installation kits allow easy fitment to Corvette, F-Body, or truck drive offsets * Accessories, tensioner, and pulleys are manufactured by OEM suppliers and many of the parts are used on production vehicles today

3.88 out of 5 stars ( 34 )

$2,305.95

$2,074.95

On Sale

Holley EFI Digital Pro Dash Standalone Kits

Upgrade to Holley EFI Standalone Digital Pro Dash kits and get the facts on your engine! They offer two versions--both are full of features that support most any users, install almost anywhere, and just like traditional gauges install in almost anything. Holley's 6.86 in version actually measures 3.5 in. tall x 7.6 in. wide, is easily mounted in a console/dashboard, off a roll cage, or on a steering column, and includes a 10 LED shift light. The larger 12.3 in. version is for hard-core enthusiasts who want the ultimate display device, and measures 11.5 in. wide x 4.25 in. tall. Holley EFI Standalone Pro Dash units feature: * Standalone digital dashes--no ECU or fuel injection required * High resolution, state-of-the-art, multi-gauge touch screen display with fully configurable layouts: -- Full color, capacitive touch screen with auto dimming for crystal clear data--day or night -- Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.) -- Virtual switch panel eliminates the need for external toggle switches -- 16 default background skins pre-loaded with unlimited options for importing custom layouts -- Built-in GPS with speed, odometer and trip odometer function (external antenna included) -- Rendered analog (dials/needles) and digital gauge styles available -- Integrated datalogger -- Rugged, water-resistant case constructed of cast aluminum for long life and durability * Plug-and-play features are pre-configured in the harness and include dash layouts/screens for: -- Oil and fuel pressure, coolant and air temperature (utilizes plug-and-play Holley sensors, not included) -- Turn signals, high beam, fuel level, engine vacuum/boost * Additional input and output functionality: -- 13 multi-configurable inputs -- 4 ground switched outputs -- 4 speed channels (two dedicated) for rpm, driveshaft speed, or any other Hall effect speed input -- User definable channel alarms and warnings * Communications/harness: -- 4-pin wiring harness contains power, ground, and CANbus connections -- Holley EFI CANbus connection for expanded capability with Holley EFI systems -- Expandable storage via USB * Integrated datalogger: -- Internal log memory of 1GB (expandable up to 32GB with addition of micro-SD card) -- External logging to USB flash drive is also available for easy file management -- On-screen datalog playback allows you to review vital run information right on the dash -- Full analysis via laptop is available. Simply download the file to a USB drive and view with the free datalog viewer at Holley.com * Flexible mounting options: Surface or flush mounting—high-quality hardware included * Simple setup and programming: USB keyboard and mouse functionality * Fully upgradeable * Both dash versions include harness/cables, mounting hardware, USB memory stick, and CAN terminator * GPS antenna * Sensors not included

5.0 out of 5 stars ( 3 )

$2,299.95

$2,068.95

On Sale

Holley HP EFI ECU and Harness Kits

Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff

4.44 out of 5 stars ( 25 )

$2,609.95

—

$2,719.95

$2,347.95

—

$2,446.95

On Sale

Overland Vehicle Systems Expedition Truck Caps

Overland Vehicle Systems Expedition truck caps with full-wing doors are the ultimate truck topper delivers rugged durability, unmatched style, and a smart 5-piece modular design. Crafted with precision and designed for the modern explorer, OVS toppers offer a host of exceptional features to upgrade your truck and enhance your outdoor experience. Select one designed for your truck and elevate your adventures. OVS Expedition truck caps feature: * Marine-grade stainless steel construction * 2-stage black powdercoated finish * LED third brake light (not included on all models) * 304 stainless steel hardware * Full opening gull wing side doors * Heavy-duty, open-assist gas struts * Top-tier gasket sealing package * High-visibility tempered glass windows * Integrated roof rails * Keyed alike locking latches for security * Heavy-duty cage (rear window) for added protection * Built-in air vent * Solid hinges for smooth, reliable opening and closing * OVS True Fit Technology ensures a seamless and secure fit, giving your truck a sleek, integrated appearance

Not Yet Reviewed

$2,899.99

—

$3,799.99

$2,609.99

—

$3,419.99

On Sale

BendPak RJ9W Rolling Lift Bridge Jacks

BendPak's RJ9W is a rolling bridge jack with 9,000-lb. capacity which is ideal for use on the BendPak HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity—which is generally associated with heavier trucks and SUVs. The RJ9W rolling bridge comes standard with easy-roll wheels that fit inside the runway channels on standard four-post lift models and provide effortless gliding along the runways for easy positioning and adjustability. The BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. Rubber contact pads are essential lifting components and increase rise and firmly engage your vehicle's undercarriage lift points—durable, non-marring surface ensures vehicle is not scraped or damaged during rolling bridge jack or car lift operation. Additional product features and specs: * Stackable adapters—give you the ability to stack and unstack BendPak contact pads that increases the versatility of your rolling bridge jack and are also useful for lifting vehicles that may have drastically different front-and-rear suspensions (with two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift) * BendPak's rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack—the car lift runs off its own power unit, so there's no "sharing" of hydraulic power between the two (an airline must be attached to the rolling bridge jack with 125 psi and 10–20 cfm) an easy foot pedal control is included for safety and convenience * Three lock levels—with three lock positions, your rolling bridge jack can be raised to the level most comfortable for you so you can find the perfect height for the perfect job as you also adjust the height of your car lift * Optional air-line kit available (sold separately)

Not Yet Reviewed

$4,295.00

$4,095.00

On Sale

Ranger RP-20FC Oil Filter Crush Presses

Ranger RP-20FC oil filter crush presses can apply 10 tons of pure, air-operated pressure to just about any used oil filter or can--easily reducing it to 25 percent of its original size and removing 95 percent of the oil. An integrated collection chamber and collector downspout makes oil recovery a cinch. At the drastically reduced size, cans and oil filters are much cheaper to dispose of, so these presses are great for the environment and your bank account. They're perfect for crushing light-duty truck and automotive filters; even the popular 8 in. tall filters for Cummins and Powerstroke diesel-powered vehicles fold beneath the massive weight of these presses.

Not Yet Reviewed

$2,475.00

$2,325.00

On Sale

Holley Mid-Mount Complete Accessory Systems

Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.

4.61 out of 5 stars ( 106 )

$2,561.95

—

$4,714.95

$2,227.96

—

$4,242.95

29 Results Found For "air"