Interior & Accessories | Summit Racing

FFP Customs Mustang Pedal Assemblies

FFP Customs bolt-in adjustable pedal assemblies are designed to allow drivers to position themselves in the car for optimal safety and comfort. This design also allows the driver to be placed where it benefits the weight balance; moving weight in the car can be a great tuning tool. These assemblies allow a driver of any height and stature to move the throttle, brake, and clutch (where applicable) pedals individually to suit their needs. All pieces of the kits are made of 6061 aluminum, providing for optimum strength while maintaining lightweight parts. The sleek design of the master cylinder and brake lines being mounted under the dash helps clean up the engine bay and leave more room for accessibility to the engine and other engine combinations. Each FFP kit uses factory mounting points, allowing for an easy bolt-and-go install; no fabrication work or welding is required. Kits are available with brake/throttle pedals, or brake/throttle/clutch pedals. The assemblies will fit a variety of Mustang applications from the 1970s, '80s, and '90s. BRAKE details: * Moving the pedal pad on the brake pedal will allow you to change the pedal ratio -- The lowest position is 6:1 -- The middle position is 5.5:1 -- The highest position is 5:1 * When moving the brake pedal backward and forward, the master cylinder moves with the pedal; therefore, you won't need to change the pushrod attached to the pedal and master cylinder. They will move as one unit. * 1 5/8 in. billet reservoir tube mount * The pedal pad height resembles the stock location * Kits utilize a Wilwood remote tandem master cylinder kit. * Pedal attaches to the master cylinder using a 3/8 in. Heim joint and 3/8 in. shoulder bolt * The pedal pivot utilizes two bronze oil-impregnated bushings * All of the mounting hardware is Grade 8 THROTTLE details: * The pivot utilizes bronze oil-impregnated bushings * There are three pivot locations * Units are designed to be used with Lokar throttle cable * The throttle stop is preset wherever you move the pedal; the stop travels with it. * The throttle firewall mount sets the cable in line with the pedal * Wide Open Throttle switch available upon request CLUTCH details (available on assembly models that include a clutch pedal): * Moving the pedal pad on the clutch pedal will allow you to change the pedal ratio.\ -- The lowest position is 6:1 -- The middle position is 5.5:1 -- The highest position is 5:1 * When moving the clutch pedal backward and forward, the master cylinder moves with the pedal; therefore, you won't need to change the pushrod attached to the pedal and master cylinder. They will move as one unit. * Kits include reservoir-mount spacers to accommodate the added clutch master cylinder reservoir * The pedal pad height resembles the stock location * Kits utilize a Wilwood remote single master cylinder kit * Pedal attaches to the master cylinder using a 5/16 in. Heim joint and 5/16 in. shoulder bolt * The pedal pivot utilizes two bronze oil-impregnated bushings * All of the mounting hardware is Grade 8 * By having the master cylinder mounted directly to the pedal, this allows for a quick return of the pedal upon release * Kit comes with a neutral safety switch and mount * On the neutral safety switch mount, a throttle cut-off switch can be added upon request.

Not Yet Reviewed

$2,250.00

TMI Pro-Classic Sport Series Split-Back Bench Seats

TMI Pro-Classic Sport Series split-back bench seats are fully assembled and are complete replacements with slider tracks. No longer will you have to waste your time and money trying to repair worn-out factory seat frames and recover them with new foam and upholstery. Ready to bolt-in with the appropriate mounting brackets, TMI Pro-Classic bench seats restore your interior with easy-care vinyl and stylish plaid inserts available in a selection of colors to complement your vehicle. Order the model recommended for fitment in your truck.

5.0 out of 5 stars ( 2 )

$2,333.00

TMI Pro-Series Low Back Seats

Sit comfortably and ride in style in a set of these TMI Pro-Series low back seats. They feature the original grain-style vinyl, with the addition of modern bolsters and a reclining seat back to make your ride as comfortable as possible. The result is a very modern looking seat that takes hints from classic styling. TMI Pro-Series low back seats include sliders, but require the use of vehicle-specific mounting brackets, sold separately.

4.3 out of 5 stars ( 23 )

$2,016.00

—

$2,056.00

TMI Pro-Series High Back Seats

Sit comfortably and ride in style in a set of these TMI Pro-Series high back seats. They feature the original grain style vinyl with the addition of modern bolsters, headrest, and a reclining seat back to make your ride as comfortable as possible. The result is a very modern-looking seat that takes hints from classic styling. The TMI Pro-Series high back seats include sliders, but require the use of vehicle-specific mounting brackets, sold separately.

5.0 out of 5 stars ( 1 )

$2,397.86

TMI Pro-Series Sport Deluxe Split Back Bench Seats

TMI Pro-Series Sport Deluxe split back vinyl bench seats are a complete replacement solution, with slider tracks and your choice of contrast stitching. Pro-Series seats are based on all-new frames, new foam for seat bottoms and backs, with hand-sewn covers. Seats come fully assembled and are 100 percent ready to bolt in with available mounting brackets. Pro Series universal seats all-metal frames are manufactured in-house at the TMI factory and allow for easy adjustment along the seat tracks, as well as reclining of the seatbacks. Mounting brackets (sold separately) are vehicle and year specific for easy installation of all TMI seats. Pro-Series Sport Deluxe split back bench seats are available in multiple widths.

Not Yet Reviewed

$3,802.00

TMI Sport R Pro-Series Low Back Seats

Add some comfort to the interior of your ride with a set of TMI Sport R Pro-Series low back seats. They do a great job of modernizing the original seats by adding a French seam stitched in a contrasting thread color around the perimeter. These seats feature the original grain style vinyl—and the result is a very modern looking seat which hints at classic factory style. TMI Sport R Pro-Series low back seats include sliders, but will require the use of vehicle-specific mounting brackets, sold separately.

Not Yet Reviewed

$2,309.94

—

$2,381.05

Racetech USA RT8119 Ultra-Lightweight Drag Race Seats

Racetech USA RT8119 Ultra-Lightweight drag race seats represent the latest advancement in drag specific seat design, combining maximum weight reduction with uncompromising driver support and safety. Built on Racetech's proven 119 series architecture, the RT8119 features an ultra lightweight full carbon fiber shell, with total weights starting at just 12.6 lbs, allowing valuable weight redistribution in competitive drag builds. Its ergonomic shell geometry, pronounced thigh support, and energy absorbing foam provide secure fitment and optimized shoulder and rib support during hard launches and chute deployment. Large harness guides accommodate modern 7 point harness systems with reverse submarine belts, meeting current NHRA technical requirements, while back mount capability enhances chassis feel and structural integration. Designed for serious sportsman and professional drag racing applications, Racetech USA RT8119 Ultra-Lightweight drag race seats deliver exceptional strength, comfort, and safety in one of the lightest drag race seats available today.

Not Yet Reviewed

$4,399.99

Racetech USA 4129 Series Seats

Racetech USA 4129 Series seats are professional-grade, FIA 8862-2009 homologated racing seats, offering superior safety with an impact-resistant hybrid shell (fiberglass/Kevlar®/carbon) and 270-degree head protection. Engineered for top-level motorsport, these seats include a mandatory back brace, specialized energy-absorbing foam, and significant lateral support for comfort during long endurance races. They're available in standard, wide, and wide-tall sizes. Key details: * Certified to FIA 8862-2009, requiring enhanced structural reinforcement * Integrated, 270-degree head restraints designed without forcing the driver's shoulders forward * Comfort and design: Features include air ducting, specialized padding for reduced fatigue, and extensive thigh/torso lateral support * Compatibility: Designed for 4, 5, or 6-point harnesses and HANS device * Installation: Requires the included side mounts and seatback brace for safety certification, with mounting bolts tightened to 22 lbs.-ft. * These seats are often used in professional, high performance, and endurance racing applications

Not Yet Reviewed

$4,519.99

—

$4,829.99

Racetech USA RT8119HR Ultra-Lightweight Drag Race Seats

Racetech RT8119HR Light-Weight drag race seats build on the ultra lightweight RT8119 platform by adding integrated head restraint bolsters for enhanced protection while maintaining exceptional weight savings and driver control. Constructed from a premium full carbon fiber shell, the RT8119HR is engineered specifically for drag racing applications and delivers outstanding strength with total weights starting around 13 lbs, allowing racers to optimize weight placement without sacrificing safety. Its advanced ergonomic shell design features pronounced thigh support, a molded base cushion, and energy absorbing foam that improves head, shoulder, and rib support during high G launches and deceleration. Large harness guides provide proper routing for modern 7 point harness systems with reverse submarine belts, keeping the seat compliant with current NHRA technical regulations, while back mount capability enhances chassis feedback and structural integration. Designed for serious sportsman and professional drag racers, Racetech RT8119HR Light-Weight drag race seats offer a no compromise combination of ultra low weight, driver containment, and advanced safety in a competition focused package.

Not Yet Reviewed

$4,999.99

TMI Pro-Series 55 in. Split Back Bench Seats

No longer will you have to waste your time and money trying to repair worn-out factory seat frames and re-cover them with inferior foam and ill-fitting upholstery. The Pro-Series 55 in. split back bench seats from TMI are based on all-new frames, new foam for seat bottoms and backs, with hand-sewn covers. Contrasting stitch around seat perimeter adds a custom touch to your vehicle to create that one-of-a-kind interior. Every step is painstakingly taken to create a comfortable, durable, custom automotive seat. The seats come fully assembled and are 100 percent ready to bolt in with the appropriate mounting brackets (sold separately). Product features and details: * The Pro-Series 55 in. split back bench seats have built in-house seat frames, molded seat foam, and upholstery with sporty side bolsters * Frames are wrapped with a heavy bolstered, high-density foam * Seat reclining mechanism allows you to tilt or slide your seat * The seats are available in vinyl material with contrasting stitching * Seats come fully assembled and ready to bolt into your vehicle with the appropriate mounting brackets (brackets sold separately) Note: These made-to-order seats ship from manufacturer. Please allow additional time in shipping process for your custom-made-to-order seats.

Not Yet Reviewed

$2,056.00

Flaming River Microsteer Electric Power Assisted Steering Kits

Flaming River Microsteer electric power assisted steering kits can easily be fitted to virtually any vehicle where manual steering currently exists. There's no need to change your steering rack or fit a hydraulic system. These kits allow you to adjust the amount of assistance by using a rotary potentiometer—or you can make the system speed sensitive by connecting a wheel speed signal to the tuning box. A mode selection switch on the box allows you to choose your preferred method—manual or wheel speed. Flip the switch and make your vehicle easier to steer or boost the horsepower a bit with a Flaming River Microsteer electric power assisted steering kit. Items and notes: * Motor/gearbox unit (MGU) * Electronic control unit (ECU) * Tuning box * Wiring harness * 11/16 in.-36 input and output shafts

3.67 out of 5 stars ( 3 )

$2,189.99

—

$2,589.99

11 Results Found For "mount"