Free Shipping on Orders Over $109 at Summit Racing

Heidts Mustang II Front Suspension Kits

Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware

5.0 out of 5 stars ( 5 )

$2,700.00

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$4,750.95

—

$4,995.00

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.71 out of 5 stars ( 21 )

$2,001.99

—

$4,914.99

Zumbrota Remanufactured Axle Assemblies

Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.

4.0 out of 5 stars ( 9 )

$2,010.99

—

$4,914.99

Ranger RML-1500XL Motorcycle/ATV Lifts

If you're looking for lifting capacity and capability, the Ranger RML-1500XL Motorcycle/ATV lifts deliver! A long list of features includes an extended work platform, 12-gauge steel construction, built-in retractable swivel casters, reversible bolt-on side decks, a cheater ramp, automatic safety locks, support poles, and a single hydraulic lifting cylinder and retracting rear wheel deck. The RML-1500XL Motorcycle/ATV lifts are a combination of power, solid construction, and user-friendly features. While there are copycats everywhere, just because it looks like a Ranger doesn't mean it works like one or lasts as long. Ranger's RML-1500XL Motorcycle/ATV lifts are rugged and tough with the muscle to prove it! Features: * With little effort, you can easily position, secure, and raise motorcycles, bobbers, stretched choppers, trikes, and other wheeled and recreational vehicles with ease * Features 12-gauge welded-steel construction, a non-skid diamond-plate platform surface and full travel automatic safety locks that allow various working heights * Side decks can be easily removed to provide a more compact work area for closer access to bikes when performing maintenance work or cleaning detail * A humongous 1,500 lb. lifting capacity handles just about anything that rolls * Retractable, built-in, full-swivel casters provide stow-and-go capability even when loaded * Precision ball bearings improve rollability and are virtually maintenance-free * A gentle slope, textured diamond-plate approach ramps, and a secondary cheater ramp means even ground huggers can be loaded effortlessly * Lift gets its power from a potent commercial-grade hydraulic power system that produces big lifting muscle right off the ground—dual-function power unit provides either air or hydraulic pump operation * User-friendly controls increase productivity, reduce injuries, save money, and improve job satisfaction * A wide base frame combined with full perimeter tie-down rings provides a stable work environment ensuring bikes and choppers remain upright; tip-over concerns remain a thing of the past * Chrome alloy hydraulic cylinder provides smooth, controlled operation and an extended-stroke ram means the RML-1500XL stands tall for improved ergonomics * A rigid tubular-steel wheel vise provides better stability and features a hardened steel crank and ergonomic handle for fast and easy set-up. Durable non-slip rubber contact plates help protect expensive wheels. * A removable rear deck provides drop-down clearance and accessibility for wheel and suspension work * A secondary rear deck with built-in dyno-rollers makes easy work out of wheel rotations and turns your motorcycle lift platform into a motoring test simulator * Rear vertical support poles provide a secure and stable support for hoist straps, as well as tie-downs for elevated bike testing or other floating required services * A removable tool and parts tray can be positioned at multiple Quick-Lock positions located on the perimeter of the lift platform

1.0 out of 5 stars ( 1 )

$3,295.00

Zumbrota Remanufactured Transfer Cases

Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.86 out of 5 stars ( 7 )

$2,001.99

—

$3,852.89

American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits

American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness

5.0 out of 5 stars ( 1 )

$4,395.00

—

$4,485.95

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$4,578.90

—

$4,980.00

Trail-Gear Trail-Creeper Dual Transfer Cases

Trail-Gear Trail-Creeper dual transfer cases will give you ultimate gear selection and greatly increase the oil flowing in and around the adapter for cooler operation. They have increased the strength of the casting by making thicker walls and creating huge, oversized gussets. The special retainer ring securely stabilizes the main bearing to prevent bearing play, and the tight tolerances on the coupler ensure long life and prevent striped-out input gears. You won't regret this mod--it's easy to install with basic tools and mechanical abilities.

4.0 out of 5 stars ( 1 )

$3,699.99

Hughes Performance Extreme Towing Diesel Torque Converters

Unleash the power of your diesel engine! Hughes Performance extreme towing diesel torque converters are designed to handle the big power and torque that your engine puts out. They feature extra brazing for increased strength, heavy-duty bearings for greater torque capacity, a triple disk lockup clutch for greater towing capacity, stator modifications for increased torque multiplication, and a billet cover to eliminate converter bow distortion.

5.0 out of 5 stars ( 6 )

$2,055.99

iDEAL Equipment Electric/Hydraulic UTV Frame Lift Benches

Premium products at an affordable price. iDEAL Equipment electric/hydraulic UTV frame lift benches are frame engaging utility and all-terrain vehicle lifts allowing for easy wheel and suspension service. Featuring a 2,500 lbs. lift capacity, along with a 24 in. wide x 88.9 in. long platform, with flip-up extension platforms, and a small lift footprint providing a safe, unobstructed work area. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV frame lift benches come with a portable or fixed pedestal control stand and fully operational control panel, with electro-magnetic lock release, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,500 lbs. * Three locking positions * Platform is 88.9 in. Long x 24 in. wide * 4.75 in. minimum height * 43 in. maximum lift height * Load bearing hinged platform extensions * Four 4.75 in. x 6.5 in. rubber contact lift pads included * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,070.00

Strange Heavy Duty 4-Piston Forged Aluminum Strut Packages

These Strange heavy-duty 4-piston forged aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles over 2,600 lbs. and are designed for drag racing only. The packages include the following: * Strange heavy-duty 4-piston calipers with brake pads * Strange 11.250 in. slotted forged steel rotors * chromoly lower control arm kit * Strange adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.

4.5 out of 5 stars ( 2 )

$2,349.99

—

$2,614.99

Moser Engineering 9 in. Housing and Axle Packages

Moser Engineering 9 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without any modifications. They include a steel housing, an axle shaft set with wheel studs, and bearings. You can order them with brakes, or to fit your OEM brakes or a specific brake kit. Available in a multitude of options, these packages are a perfect fit for your everyday driver or performance vehicle.

Not Yet Reviewed

$2,095.00

—

$3,114.00

Strange Bolt-In S60 Rear Differential Assemblies

Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles

4.5 out of 5 stars ( 4 )

$2,594.99

—

$3,371.99

Crower Stainless Steel Shaft Mounted Rocker Arm Systems

For those of you that feel most confident running a steel-based valve train, look no further than the collection of Crower stainless steel shaft-mounted rocker arm systems. Every configuration has been rigorously scrutinized to offer extreme rigidity and accuracy while optimizing the moment of inertia phenomena condition. Crower engineers made ease of installation and maintenance a top priority--so you'll never waste a moment when time is critical at the track. These stainless steel shaft rocker systems are a perennial favorite of dirt late models and marine endurance competitors. Sustained high temperatures have little effect on the strength properties of stainless steel so components made from this material typically have a longer life expectancy than similar components made from aluminum. All Crower shaft mount rocker arms are available with Crower's needle bearing roller tip option. They greatly reduce friction for added horsepower and decreased valve guide and valve stem wear. The lighter tips deliver greater valve control for increased rpm and improve valve spring longevity by decreasing heat compared to traditional non-needle designs.

5.0 out of 5 stars ( 2 )

$2,375.99

—

$3,285.99

Scat Modern Muscle Engine Rotating Assemblies

Scat Modern Muscle engine rotating assemblies are available with high-quality Scat forged 4340 crankshafts and I-beam or H-beam connecting rods with 7/16 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application, and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe.

4.67 out of 5 stars ( 3 )

$2,002.99

—

$2,407.99

Winters Quick-Change Forged Steel Tube and Bell Clamp Rear Axle Assemblies

Winters quick-change forged steel tube and bell clamp rear axle assemblies offer traditional hot rodding with the very latest technology. They feature a Winters Sprint Car center with a 10 in. diameter, a heat-treated lower shaft, axle seals, a large 31-spline Winters track differential, and CNC-machined components. Their virtually unbreakable, parallel-gear design automatically senses wheel spin and delivers positive traction. The axle assemblies feature Ford Big Bearing style housing ends that will accept stock 3.150 in. diameter axle bearings.

5.0 out of 5 stars ( 2 )

$3,349.99

Strange Lightweight Single Piston Aluminum Strut Packages

These Strange lightweight single-piston aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles under 2,400 lbs. and are designed for drag racing only. The packages include the following: * Strange spindle mount brake kit * chromoly lower control arm kit * Strange externally adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.

Not Yet Reviewed

$2,449.99

Strange Medium Duty 2-Piston Forged Aluminum Strut Packages

These Strange medium-duty 2-piston forged aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles under 2,600 lbs. and are designed for drag racing only. The packages include the following: * Strange medium-duty 2-piston calipers with brake pads * Strange 11.250 in. slotted forged steel rotors * chromoly lower control arm kit * Strange adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.

5.0 out of 5 stars ( 1 )

$2,169.99

—

$2,489.99

Moser Engineering 12-Bolt GM Housing and Axle Packages

Moser Engineering 12-bolt GM housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without modifications. They include a steel housing, an axle shaft set with wheel studs, bearings, and a drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser 12-bolt GM housing and axle packages are a perfect fit for your everyday driver or performance vehicle.

Not Yet Reviewed

$4,494.00

Strange Floater Kits

Strange floater kits have become the standard for Pro Mod classes, blown alcohol classes, and other high-horsepower abusive drag racing applications. The Strange floater kits are designed for use with 40-spline axles due to the tremendous increase of torsional strength. Upgrade your floater kit to include the standard brake system, or choose the carbon fiber option for maximum stopping power. Building a 6-second, 230-plus mph race car? Try one of these Strange floater kits and put a bulletproof assembly to the test. Strange floater kits include: * Your choice of 8.5 in. or 13.5 in. 4130 chromoly steel spindles * Steel drive plates * Aluminum hubs * Forged steel slotted rotors * Timken bearings * Seals * chromoly wheel studs * Steel lug nuts

5.0 out of 5 stars ( 1 )

$3,211.99

—

$3,316.99

Moser Engineering Dana 60 Housing and Axle Packages

These Moser Engineering Dana 60 housing and axle packages give the freedom to choose components you prefer, while still fitting your vehicle without any modifications. They include a steel housing, axle shaft set with wheel studs, bearings, and drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser Engineering Dana 60 housing and axle packages are a perfect fit your everyday driver or performance vehicle.

Not Yet Reviewed

$3,316.00

Strange Ultra Strut Packages

These Strange Ultra Strut packages are designed for the most demanding Pro and Sportsman racers. They have been developed and track-tested by chassis builders and top racers for over two years. The Strange Ultra Strut packages include a pair of coilover shocks, coilover springs, a lower control arm kit, special wheel races and bearings, a disc brake kit, and aluminum steering arms. A specification sheet must be filled out prior to ordering and a coilover spring rate is required for your application. Please call us at 1-800-230-3030 for further information.

Not Yet Reviewed

$2,833.99

Scat Engine Rotating Assemblies

Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft, plus I-beam or H-beam connecting rods with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application—and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe. Kits with cast and standard forged pistons have standard rings; kits with premium forged pistons have file-fit rings. Nearly 800 Scat kits are available; order the package tailored for fitment with your engine application.

4.28 out of 5 stars ( 133 )

$3,299.99

35 Results Found For "bearings"