Availability
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 15 )
$2,349.95
—
$2,549.95
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$2,049.95
—
$3,299.95
Holley Super Sniper EFI Stealth 4150 fuel injection systems are what you need to convert your vehicle to fuel injection. Holley Super Sniper Stealth 4150 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Compatible with draw-through or blow-through forced induction applications * 2 Bar MAP sensor * Integrated ignition timing control * -6AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0-5 V sensors, one sensor ground supply for 0-5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-886 is recommended * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit for 2.250 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
( 4 )
$2,099.95
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$2,149.95
Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
( 3 )
$2,149.95
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$2,049.95
—
$2,199.95
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$2,049.95
—
$2,199.95
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 93 )
$2,549.95
—
$2,949.95
Holley Terminator X Stealth 4150 24X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator X Stealth 4150 24X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories
Not Yet Reviewed
$2,249.95
Holley Terminator Max X Stealth 4150 24X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator Max X Stealth 4150 24X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications, as well as plug-and-play transmission control for GM 4L60 and 4L80 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * (4) inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * (4) Outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in 3 finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories
Not Yet Reviewed
$2,749.95
Holley Terminator Max X Stealth 4150 58X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator Max X Stealth 4150 58X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications, as well as plug-and-play transmission control for GM 4L60 and 4L80 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories
( 1 )
$2,749.95
Holley Terminator X Stealth 4150 58X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator X Stealth 4150 58X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories
Not Yet Reviewed
$2,249.95
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$2,099.95
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$2,099.95
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$3,249.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
