Availability
Showing In Stock Items. Show All 30 Items.
ARP torque converter bolts are manufactured from 8740 chromoly steel and feature 200,000 psi tensile strength. Add a set to your drivetrain, and shearing torque converter bolts are a thing of the past.
( 275 )
$21.99
—
$23.99
Have a clutch repair to do? Use Hughes Performance torque converter bolts! They provide the advantage of high quality and convenience. These bolts feature steel construction and the bolt threads are coated with a special thread-locking compound to maintain proper bolt torque.
( 4 )
$23.99
Bolts weaken over time, and may not be as strong as they were when they were new. New converter bolts are cheap insurance against fastener failure, which could lead to expensive converter and transmission damage! These TCI torque converter bolts can give you peace of mind.
( 10 )
$43.95
On Sale
Designed for high performance applications, these Grade 8 forged steel, heat-treated torque converter bolts from Mr. Gasket deliver extra strength. Their plated black finish resists rust and corrosion and they come complete with washers where needed.
( 7 )
$24.98
FTI Performance offers torque converter bolts for a variety of applications, including the SRLTO Series and BA Series. The replacement fasteners are machined from quality metals and treated with corrosion protection. Order the bolt kit designed for your converter.
Not Yet Reviewed
$44.59
Correctly align your torque converter using one of these TCI midplate spacer kits. They are designed for use with TCI's 7, 8, 9, and 10 in. race torque converters. The kits are available for either a 1/8 in. or 1/4 in. midplate and include the required longer torque converter bolts to complete the installation.
( 7 )
$22.95
—
$48.95
Properly set your torque converter clearance with a set of Meziere torque converter shims. They are precision-machined from 4130 aircraft-quality material, so you can be sure that the faces are flat and parallel. The shims are available for either 7/16 in. or 1/2 in. bolts and come in three different thicknesses. Meziere torque converter shims also feature a black oxide finish for maximum durability.
( 9 )
$27.59
Summit Bucks
ACDelco GM Genuine Parts replacement bolts are available for a variety of applications, including transmission torque converter housings. Installing factory-recommended hardware helps to ensure the same performance, durability, and service life you expect from General Motors.
( 15 )
$20.99
Measure the torque of bolts, lug nuts and other fasteners safely and accurately with a Powerbuilt needle torque wrench. Calibrated for torque up to 150 lbs.-ft. (203 N m), this precision torque wrench (944050) is set for life and does not need periodic adjustment. The kit includes a handy chart for converting foot-pounds to newton-meters and meter-kilograms. An innovative pivoting handle keeps the distance from drive point to load point constant for accurate measurement. This tool is strong and dependable enough to last a lifetime. Additional details: * Kit Services: all foreign and domestic vehicles * Measures the torque of bolts, lug nuts and other fasteners safely and accurately (up to 150 lbs.-ft.) * Set includes needle torque wrench and durable storage case with step-by-step instructions * Precision-built to meet or exceed ANSI and/or ASME standards
Not Yet Reviewed
$47.99
ICT Billet crankshaft adapter sleeves create the right space to make your swap a success. They offer several choices to fit your torque converter snout. They are made from steel and some may include bolts.
( 16 )
$30.99
—
$36.99
FTI Performance offers a wide selection of torque converter parts, including bolt kits, crank adapters, and related accessories. These crankshaft adapter sleeves will adapt GM torque converters to Ford small block or big block engines with 1.375 in. pilot. They're available for many Ford applications from the 1960s and up; and Chevy applications from the 1990s and up.
( 1 )
$29.39
TCI's performance flexplate bolts are the proper size and grade for your TCI flexplate. These fasteners are made from high-quality chromoly and have a hex head.
( 2 )
$58.95
Anchor Industries engine torque strut mounts are designed to fit, form, and function like the OEM pieces. These mounts prevent excessive engine and transmission vibration, reducing stress on the components and dampening noise.
( 23 )
$35.99
Flexplates are important connections between your engine and torque converter, and are relatively inexpensive parts to change out when they demonstrate signs of wear. These one- or 2-piece Pioneer replacement flexplates are machined from durable steel for long-lasting performance. They're available in a wide variety of configurations for fitment with engine and transmission applications spanning six decades.
( 72 )
$27.99
—
$80.99
Competition Engineering flywheel and flexplate shims are manufactured out of high-quality 0.090 in. steel stock. They can be used anytime that the spacing of the torque converter to the transmission pump needs adjustment, most commonly found when using mid-mount motor plates. If you're looking for flywheel and flexplate shims, Competition Engineering has you covered.
( 9 )
$40.99
—
$42.99
Considering an LS engine swap? Advance Adapters crankshaft bushing spacers will help to make the fit a perfect match. Simply bolting the old-style converter to your LS engine won't work without the proper spacer. These steel accessories create the required distance, so the nose of the torque converter fits with the crank. Keep your crankshaft and add one of these Advanced Adapters bushing spacers.
( 1 )
$28.39
Considering an LS engine swap? TCI pilot extension adapters will help to make the fit a perfect match. Simply bolting the old-style converter to your LS engine will not work without the proper spacer. TCI spacers will create the required distance, so the nose of the torque converter fits properly with the crankshaft.
Not Yet Reviewed
$52.95
AP Exhaust AccuSeal exhaust clamps provide optimal seal and joint retention performance. They are a simple, effective way to connect exhaust system components, pipes, mufflers, and converters. AccuSeal clamps provide a unique seal and high clamp loads without permanent distortion. The clamps are available in aluminized steel or bright 430 stainless steel—in a wide range of diameters. Product features: * Connections are serviceable and easy to disassemble * Fastening system stretches the band using its tensile strength—permitting the use of thinner gauge, corrosion-resistant materials * Exclusive reaction block provides a full 360 degree distribution of stretching forces; transfers bolt torque into clamp strength and an assured seal * Unitized assembly; no loose hardware * Slides into place, installs easily and reliably with only one assembly torque point * High-strength fastener hardware with corrosion-resistant coating
( 43 )
$21.99
—
$27.99
Sunex Tools driveline impact sockets are great for most limited access fasteners. These sockets allow for the removal and installation of driveline bolts, torque converters, cylinder heads, and 4x4 transmission casings. They include sockets for a variety of models. Sunex Tools driveline impact sockets are offered in SAE and metric versions. Order the individual sizes you need, or an entire set with heavy-duty blow-molded storage case.
( 4 )
$31.99
Cal-Van Tools Ford harmonic balancer holders can be used in several ways, making service on Fords easier. They keep the balancer in place when removing or installing the center bolt of serpentine belt pulley extension; or used to turn the engine to gain access to the torque converter bolts and hold the engine stationary while loosening and tightening them; and they also provide an easy method to hold the crankshaft while loosening and tightening harmonic balancer retaining bolt.
Not Yet Reviewed
$28.99
Summit Racing™ flexplate dust covers are manufactured from high-quality steel and are available in your choice of finishes. They allow for easy access to the torque converter area and prevent debris from entering your transmission's bellhousing.
( 348 )
$41.99
—
$46.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$24.99
ATP offers replacement flexplates in a variety of sizes, shapes, and configurations. The steel plates are manufactured to exacting tolerance for precise fit. Order the model recommended for your year/make, engine, and transmission application.
( 201 )
$33.99
—
$54.99
These Standard Motor automatic transmission control solenoids are designed to replace faulty factory units to keep your transmission shifting smoothly. They meet or exceed OEM specifications and are available for a variety of applications.
( 14 )
$27.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
