Availability
MSD Digital-6 replacement wiring harnesses will provide the quality and performance matched only by the originals. You can trust MSD to provide premium replacement parts and wiring for their ignition controls and your build. Whether you're freshening your car, or have a wiring harness with one too many splices, replace them with original components from MSD.
( 12 )
$32.91
—
$47.93
The GM LS Series engines are being built for a lot of different performance and racing applications. You can see good ol' hot rodder ingenuity taking place as racers are running carburetors and even using distributors on these engines! These MSD LSx trigger converters plug into the factory crank sensor of an LS engine. They then convert the factory trigger signal into a 12 V square wave signal to trigger an MSD ignition control such as a 6 or 7 Series ignition control. If you are incorporating a front mount distributor into your LS engine, this means that you won't need to run an external crank trigger.
( 2 )
$52.69
These MSD advance kits are the same kits that come with your MSD distributor. The kits include the needed components to make your distributor perform like it did when it was brand new.
( 131 )
$53.05
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 138 )
$28.99
—
$42.99
Summit Bucks
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 32 )
$50.99
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 56 )
$25.99
—
$27.99
FAST PS20 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.
( 12 )
$55.95
FAST PS40 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high-rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.
( 4 )
$67.95
Tuff Stuff Performance replacement alternator regulators keep your alternator safely under control. These voltage regulators force your alternator to maintain sufficient voltage to recharge your battery safely. Designed to fit Tuff Stuff Performance alternators, the economical regulators will protect your battery and electrical components from being fried. Plus, they allow you to eliminate unsightly alternator harnesses. Order the model recommended for your vehicle/alternator application.
( 88 )
$59.99
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 16 )
$25.99
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$20.99
—
$51.99
Crown Automotive vehicle speed sensors are used by many electronic and transmission systems to ensure correct vehicle operation. The small units convey information to your on-board computer about how fast the engine is spinning at any particular moment—which could affect the performance of the transmission, speedometer, ABS, power steering, or cruise control. Like many engine components, speed sensors can eventually malfunction through years of use. If your car, truck, or van develops a faulty sensor, Crown stocks a variety of replacements for countless makes and models.
( 1 )
$24.99
—
$29.99
Weather forecasts change daily, but your vehicle is still one place where you can control the climate. And that's why Dorman blower motor resistors are so important. The easy-to-install devices control the electric current to the fan motor, keeping your heating and air conditioning system at peak performance, no matter the speed. Their long-lasting design resists thermal fuse failure, overheating, and burnout. These components are available for fitment in a wide range of cars, trucks, and vans.
( 21 )
$30.99
—
$51.99
Champion Copper Plus spark plugs have been original equipment on a wide variety of engines for many years. They feature nickel alloy centers and ground electrodes with efficient wear characteristics. In addition, the spark plugs' extrusion of copper into the center electrode allows for increased conductivity and heat control. Manufacturers have used them in non-automotive applications, such as lawn and garden and other power equipment. Replace your old plugs with Champion Copper Plus spark plugs for maximum reliability.
( 176 )
$47.99
—
$49.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$23.99
NGK Spark Plugs offers NTK automatic transmission speed sensors for a wide range of applications. They measure the rotational speed of the transmission shafts. Input and output transmission speed are monitored and relayed to the engine control module or transmission control module by either an analog or digital signal for proper shift points, speedometer operation and transmission diagnostics. Reasons for replacement include check engine light illumination, poor or erratic shifting, and no or erratic speedometer operation. Additional details: * The NTK Difference: High-strength thermoplastic is resistant to temperature, moisture and chemicals. A pre-installed O-ring precisely matches OE material and diameter for ease of installation and superior sealing. * OE match: Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of the transmission's speed. Sensor output signal matches factory specifications. * Automatic transmission speed sensors send information to the vehicle's control units (ECU, TCU, or PCM) to precisely perform functions such as shift points, ignition timing and air/fuel ratio.
Not Yet Reviewed
$21.99
NGK Spark Plugs offers NTK MAP sensors for a wide range of applications. They provide manifold pressure information to the engine control unit (ECU). This data is then used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing. The sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing. NTK sensors undergo extreme testing conditions that include thermal shock, vibration, and OBD verification. Order the model recommended for your vehicle.
Not Yet Reviewed
$22.99
—
$45.99
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 35 )
$26.99
Your vehicle's engine crankshaft position sensor reports the precise location of the crank to the Powertrain Control Module (PCM) to determine engine mechanical operation, as well as possible cylinder misfire. NTK camshaft position sensors are manufactured to operational performance standards to meet or exceed OE fit, form, and function, ensuring proper position and/or rotating speed of the engine's crankshaft. They undergo extreme testing conditions that include thermal shock, vibration, and OBD verification. They feature sealed connections to prevent leaks, environmental corrosion, and performance issues. O-rings and seals are included where applicable, and they are backed by a 3 year/36,000-mile warranty. Select the NTK crankshaft position sensor needed for your vehicle.
Not Yet Reviewed
$34.99
Don't take chances with old, questionable, or faulty blower motor resistors that can leave you without heat or air circulation. Standard Motor Products blower motor resistors will control the electrical current flowing from the fan switch to the blower fan, allowing you to set the fan at different speeds. They are designed to exceed OEM specifications for dependable, maintenance-free operation. Restore your vehicle's HVAC functions with high-quality replacement parts from Standard Motor.
( 32 )
$28.99
—
$49.99
Anti-lock braking system speed sensors play a vital role in the safety and maneuverability of your vehicle. NGK ABS speed sensors will accurately monitor rotational speed for anti-lock brake function, stability control, and traction control. The connectors, mounts, and wire lengths are an exact match to OE for worry-free installation. Grease, mounting nut, and instruction sheet are included where applicable. Select one(s) designed for your vehicle.
( 1 )
$23.99
—
$52.99
Most cars with an HVAC system use blower motor resistors to control the speed of the fan. If the resistor becomes corroded, the lower speed settings may stop working or the fan will not work at all. Replace your Jeep's resistors with Crown Automotive OE quality parts.
( 1 )
$21.99
Crown Automotive oxygen sensors make modern electronic fuel injection and emission control possible. They help determine—in real time—if the air/fuel ratio of a combustion engine is rich or lean. If your sensor functions fail and testing confirms that your unit is faulty, simply order the Crown replacement compatible with your Jeep, Chrysler, Plymouth, or Dodge vehicle. These components are assembled from the finest grade materials and are always field-tested to ensure quality performance.
( 4 )
$41.99
MAP (Manifold Absolute Pressure) sensors which fail may cause the engine to have a too rich or lean fuel mixture condition. Crown Automotive MAP sensors restore data transmission to regulate timing control and fuel delivery. They convert engine vacuum/manifold pressure to an electrical signal so that the computer knows how much load the engine is under. This data is the basis for calculating values which keep your vehicle in top running order.
( 3 )
$22.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
