Availability
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$43.99
Allstar Performance offers pre-terminated versions of the 8mm sleeved ignition coil wires found in their kits. The sets feature ends for HEI tower-style terminals. Often overlooked when performing maintenance or diagnosing a problem, coil wires are susceptible to damage or weakening over time. These replacement wires include rubber/silicone boots and are available in lengths ranging from 12 in. to 42 in.
( 1 )
$24.99
—
$32.99
ICT Billet alternator wiring harnesses are assembled with OEM tooling, OEM Delphi components (connector, lock, seals, and terminals), and OEM harness wire colors. They're designed to be used when converting from standard 105 amp GM alternators to hi-amp GM alternators, such as 145 or 160 amp. When swapping out your alternator, don't take a chance with cheap wire connectors; poor quality materials can have conductivity issues that will cause your engine to run poorly and be difficult to diagnose. Order the ICT harness recommended for your application.
( 1 )
$43.99
Your starter solenoid has a tough enough life without soaking up all of that exhaust heat. Relocate it to a cooler spot with one of our Summit Racing™ remote mount solenoids. You can mount them just about anywhere, and they can serve as junctions for accessories like our remote starter switches. Instructions are included.
( 71 )
$31.99
QuickCar Racing Products offers quick-connect battery charging cables in 24 in. or 36 in. lengths. They quickly connect and disconnect, eliminating the need for hood or deck lid removal. Each kit includes necessary connectors, terminals and dust cover. * Includes an 8-gauge red and black cable, necessary connectors and terminals, and a dust cover, enabling you to mount the connector on the exterior of a vehicle * The kit provides a remote access point for charging, eliminating the need to access the battery directly * The cables are made of copper
Not Yet Reviewed
$42.95
—
$53.95
When moving or relocating your MAF sensor, you'll want one of these Ron Francis Wiring mass airflow sensor extension harnesses. They feature factory-terminated ends on one end for a plug-in installation and have color-coded wires for easy wiring on the other end. The harnesses are 36 in. long, so you'll have plenty of wire no matter where the MAF sensor is mounted in the engine compartment.
( 7 )
$30.33
—
$32.29
On Sale
Taylor coil wire kits include all of the terminals, boots, and spark plug wire you need to hook up just about any ignition coil. They include both male and female terminals for the distributor end, as well as for the coil attachment.
( 93 )
$24.90
$22.41
Ground wires to the alternator are just as important as the charge wire. Make sure your alternator is properly grounded with Powermaster ground wires. Their selection offers several gauges and lengths with copper wire cores, and assembled with a 5/16 in. battery eyelet and a 3/8 in. alternator eyelet. Choose the right fit for your vehicle.
( 3 )
$33.99
—
$46.99
Casper Electronics oxygen sensor extension harnesses prevent cutting and safely extend your O2 sensor wires during relocation. They are available in several styles to suit your application.
( 56 )
$21.79
—
$33.99
Moroso coil wire kits include all of the terminals, boots, and spark plug wire you need to hook up just about any ignition coil. They include both male and female terminals for the distributor end as well as for the coil attachment.
( 5 )
$31.99
—
$45.99
Need to extend or adapt your MAF wire harness in your vehicle? Simply use JMS Chip MAF harnesses! They're a great plug-and-play option, so MAF relocation anywhere is not a problem. These harnesses use OE-quality plugs and are direct plug-and-play extension harnesses designed to provide a quick and clean installation--no cutting or splicing wires is required.
( 2 )
$49.75
Save yourself some time, hassle, and confusion with Longacre heavy-duty wiring harnesses. Designed to plug into all Longacre switch panels, these ready-to-go wiring harnesses feature color-coded wires to match their dash panels for a straightforward, professional job. Depend on Longacre heavy-duty harnesses to get you wired correctly for the race.
Not Yet Reviewed
$38.99
ICT Billet sensor harness extensions make change happen. They offer a selection of pre-terminated sensor to get you plugged in properly. From engine or intake swaps, ICT Billet harnesses have you covered.
( 4 )
$43.99
ICT Billet has your engine swap covered with their ECM wiring connector kits. These terminals, retainers, and connectors are all designed to work with OE sensors and factory connectors for the easiest installation possible! This is one area that you don't want to use poor quality components—which are subject to crimps, twisting, and unseated terminals. If the wiring has conductivity issues, your engine will run poorly, and the problem is hard to diagnose. ICT Billet has built its reputation on dependable, high-quality parts. Order the kit preferred for your application.
Not Yet Reviewed
$22.99
—
$43.99
These American Autowire battery disconnect switches are made of high-quality materials. They have a voltage compatibility of 6 to 36 V and operate off of manual activation switches. Find the battery disconnect switches that suit your needs at American Autowire.
( 23 )
$38.95
—
$50.35
Keep It Clean battery kill switches offer remote mounting and easy operation. Their kill switches feature heavy-duty contacts to handle the amps and high-quality brass to ensure maximum current flow with minimum current loss. Installation is clean and neat. Keep It Clean also offers a super heavy-duty design that handles 1,000 rush amps and meets IHRA/NHRA standards for competition use. Both are ideal for preventing battery drain during storage, or as a simple security measure. Wire your ride right the first time with Keep It Clean battery kill switches!
( 7 )
$39.95
Prevent potential fires and the theft of your custom vehicle with the use of these Ron Francis Wiring master disconnect switches. These heavy-duty switches are designed to be installed in-line of your positive battery cable and can be positioned under your hood, seat, firewall, or in the rear of the vehicle. These master disconnect switches also include rubber insulator boots to prevent possible short circuits. These Ron Francis Wiring master disconnect switches are sure to add safety and security to your prized custom vehicle.
( 20 )
$48.95
Longacre battery disconnect switches are available in a variety of styles, from economy to weatherproof and more. They are required by many sanctioning bodies. Order the model that best suits your application.
( 31 )
$32.99
—
$69.99
ICT Billet has your LS swap covered with ICT Billet wiring pigtails. Options are available for standard and extended lengths on a multitude of applications. All designed to work with OE sensors for the easiest installation possible!
( 11 )
$22.99
—
$25.99
Ron Francis Wiring Synergy Series ignition and dimmer switches include the Series IS-07 ignition switch, as well as the DS-02 floor dimmer switch, and include a door jamb switch. They are made of high-quality materials to ensure dependability for years to come. If you're in need of any switches in your ride, Ron Francis Wiring has you covered.
( 1 )
$53.85
Clearance
Standard Motor Products fuel pressure sensors ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel system. If your sensor is faulty, Standard Motor has a line of replacements to fit numerous models.
( 3 )
$41.99
$38.50
Haltech CAN cables reduce wiring, electronic interference, and offers high-speed network communication. These 8-pin to 8-pin Tyco connectors are available in white or black and the harnesses are available in many lengths. Choose the length you need.
Not Yet Reviewed
$45.00
Gale Banks is an innovative engineer in the world of diesel performance, and his company is a leader in the aftermarket industry. Banks Power interconnect cables allow your vehicle to communicate with their various parts to ensure the best outcome. These cables allow Banks tuners and/or SpeedBrakes to connect with the vehicle's OBD-II port in order for the tuner, the vehicle, and the iQ, if so equipped, to communicate with each other. Banks Power interconnect cables are designed to communicate across all of their platforms to obtain maximum performance and bring your vehicle to life.
Not Yet Reviewed
$38.00
Get the right traction with Standard Motor Products 4WD selector switches. These 4WD dash mount OE replacement switches keep your rig ready for on and off-road adventures. Standard's robust switches are built with high-grade materials to meet your stringent demands. You're ready to travel on path or pavement, in wet or dry conditions, when you replace your old 4WD selector switches with new ones from Standard Motor Products.
( 5 )
$39.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
