Availability
Edelbrock Performer fuel line and fitting kits include the braided flex hose and pre-assembled ends to connect your fuel filter to the mechanical fuel pump—or, in racing applications, to the fuel pressure regulator. These kits are available in a variety of styles, providing leak-free installation in minutes. When plumbing a fuel system, trust the aftermarket performance expertise of Edelbrock!
( 112 )
$50.95
—
$69.95
Clean fuel equals better performance and Edlbrock inline fuel filters will help. They offer a variety of filters that will keep your go-juice from being contaminated: billet aluminum high-flow filters with different levels of micron filtration, aluminum anodized filters for your nitrous set-up, and even replacement filters for your EFI fuel delivery system. Edelbrock inline fuel filters screen out the bad stuff so your engine gets the good stuff.
( 47 )
$31.95
—
$43.95
Designed for use with Edelbrock's single and dual feed fuel line kits, these high-quality stainless steel braided lines make it simple to complete your installation of any Edelbrock fuel pump to fuel filter. Russell anodized aluminum fittings are included.
( 43 )
$58.95
Edelbrock aluminum street fuel filters are high-quality fuel filters designed for carbureted engines. They feature a sintered-bronze 40 micron element that can be cleaned or replaced. They are available in chrome, as well as blue, red, and black anodized finishes to give you the personalized touch you're looking for. Get a fuel filter with a name you can trust, on and off the track, with these Edelbrock aluminum street fuel filters.
( 10 )
$21.95
—
$23.95
Edelbrock universal fuel hose and filter kits allow you to add a fuel filter where none existed. Utilizing part of your stock steel fuel line, they offer a quick fix--simply cut the stock line, install the compression fitting, add the neoprene hose, clamp, and fuel filter, and connect to your carburetor. Kits include fuel filter, fuel hose, special fittings to adapt 5/16 in. and 3/8 in. steel line to hose, and stainless steel worm-type hose clamps. Keep your fuel clean with Edelbrock universal fuel hose and filter kits.
( 22 )
$60.95
Edelbrock Clear View fuel filters dress up any carbureted car's engine bay and provide a quick visual check of fuel flow and condition. Fully machined black E-coated aluminum ends are laser-inscribed with the Edelbrock logo, inlet and outlet direction, and hose size. The filters are designed for use with rubber fuel lines rated up to 10 psi. A serviceable 100-micron nylon filter element keeps dirt and debris from clogging up small passages in your carburetor. The filter element is easily replaceable. Clear View fuel filter models are available for multiple I.D. hose diameters—including a universal kit that fits 1/4, 5/16, and 3/8 in. I.D.
( 1 )
$21.95
Edelbrock fuel pump block-off plates are designed to delete the stock mounting location when a mechanical fuel pump is replaced with an electrical system. These plates include gaskets, and are machined from billet aluminum with a black anodized finish. They're available for a variety of small block and big block applications.
( 10 )
$31.95
—
$36.95
Edelbrock aluminum fuel rail stands are CNC-machined from aluminum extrusions and are matched with standard injectors (2.650 in. O-ring spacing) or Pico injectors (1.50 in. O-ring spacing). These fuel rail stands are designed for use with Edelbrock aluminum fuel rails for Edelbrock EFI manifolds.
( 5 )
$52.95
Edelbrock fuel pump rebuild kits are among the best-engineered performance products in the world. Their rigorous testing program ensures you of receiving quality components in every kit. All fuel pumps are for gasoline only.
( 10 )
$55.95
—
$58.95
These Edelbrock fuel pressure regulator brackets are designed to mount your regulator right by the carburetor. They are made from aluminum and black powdercoated for durability.
( 4 )
$52.95
Carbureted or EFI, Edelbrock has rebuild kits to service their fuel pressure regulators. They include diaphragm and hardware to renew performance and keep operation at optimum levels. Control the flow efficiently after overhauling your fuel pressure regulator with rebuild kits from Edelbrock.
( 2 )
$50.95
Give your multi-carb setup Edelbrock fuel distribution blocks. They are cast aluminum and offer vintage style for today's hot rod dual, triple, and quad carburetor applications. Also available in mini triple outlet blocks, these Edelbrock distribution blocks feature a single 3/8 in. inlet with multiple 1/4 in. outlets, depending on your application. These fuel blocks come as-cast or polished to match or complement your custom setup.
( 1 )
$60.95
Edelbrock replacement fuel filter elements are available for just about any style of Edelbrock fuel filters. These elements provide for the simple and easy maintenance of your fuel filter systems.
( 3 )
$28.95
—
$34.95
Designed to take the guesswork out of carb swaps, these fuel line and filter kits provide a quick, leak-free installation in a matter of minutes. They'll work with all Performer and some other brands of carbs and are available in different forms for a variety of applications.
( 35 )
$50.95
Edelbrock fuel pressure regulator fittings work with your Pro-Flo EFI systems. Each of these brass fittings includes an O-ring. Order the size needed for your application.
( 1 )
$30.95
Edelbrock LS3 1-Bar MAP sensors are designed to fit Chevrolet LS3 applications that use an Edelbrock LS3 XT intake manifold or any other factory-style intake that has a 12mm MAP sensor port hole. These MAP sensors should also replace the 1-bar MAP sensor on factory LS3 applications when an Edelbrock Pro-Flo 4 EFI system has been installed in order to provide a compatible calibration during installation and tuning.
Not Yet Reviewed
$55.95
Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.
( 2 )
$33.95
—
$46.95
Designed to fit all Edelbrock square-bore carbs, Edelbrock single-feed fuel line kits provide a clean and custom plumbing solution for your Edelbrock carburetors. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. Edelbrock single feed fuel line kits are the right choice for your hot rod.
( 372 )
$38.95
—
$53.95
Are you experiencing some issues with your Edelbrock Pro-Flo EFI system? Perhaps it's time to replace bad components with new ones. Edelbrock Pro-Flo fuel pump relays can help restore proper function to your Pro-Flo EFI system so that it can perform its optimum best!
Not Yet Reviewed
$31.95
Edelbrock Performer carburetor maintenance kits consist of genuine Edelbrock parts to help you rebuild or simply keep your carburetor in top notch condition. They include all of the parts and gaskets necessary to rebuild or modify your Performer carburetor for optimum performance. You put a lot of hard work and effort in your project vehicles. Make sure the parts you use are worthy of the effort and order the Edelbrock Performer carburetor maintenance kit designed for your application.
( 284 )
$47.95
—
$60.95
Edelbrock Pro-Flo Series air cleaners work with a variety of popular carburetors, including Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra Jet and Carter AFB, just to name a few. Knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapters (sold separately) are provided, depending on application. Pro-Flos offer multiple styles to match yours—and sizes for a proper fit. When you're looking for an ideal solution to your hood clearance problems, consider Edelbrock Pro-Flo Series air cleaners.
( 597 )
$33.95
—
$50.95
These carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
( 206 )
$26.95
—
$62.95
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
( 354 )
$44.95
—
$89.95
Edelbrock throttle lever adapters are designed to facilitate an easy connection of your factory cable-operated linkages to your new Edelbrock Performer carburetor. The adapters work with cruise control and are available for many Ford, Chrysler, Dodge, and Plymouth vehicles.
( 124 )
$40.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
